Ledger API Reference

com/daml/ledger/api/v1/active_contracts_service.proto

GetActiveContractsRequest

Field Type Label Description

ledger_id

string   Must correspond to the ledger ID reported by the Ledger Identification Service. Must be a valid LedgerString (as described in value.proto). Required

filter

TransactionFilter   Templates to include in the served snapshot, per party. Required

verbose

bool   If enabled, values served over the API will contain more information than strictly necessary to interpret the data. In particular, setting the verbose flag to true triggers the ledger to include labels for record fields. Optional

trace_context

TraceContext   Server side tracing will be registered as a child of the submitted context. This field is a future extension point and is currently not supported. Optional

GetActiveContractsResponse

Field Type Label Description

offset

string   Included in the last message. The client should start consuming the transactions endpoint with this offset. The format of this field is described in ledger_offset.proto. Required

workflow_id

string   The workflow that created the contracts. Must be a valid LedgerString (as described in value.proto). Optional

active_contracts

CreatedEvent repeated The list of contracts that were introduced by the workflow with workflow_id at the offset. Must be a valid LedgerString (as described in value.proto). Optional

trace_context

TraceContext   Zipkin trace context. This field is a future extension point and is currently not supported. Optional

ActiveContractsService

Allows clients to initialize themselves according to a fairly recent state of the ledger without reading through all transactions that were committed since the ledger’s creation.

Method name Request type Response type Description
GetActiveContracts GetActiveContractsRequest GetActiveContractsResponse Returns a stream of the latest snapshot of active contracts. If there are no active contracts, the stream returns a single GetActiveContractsResponse message with the offset at which the snapshot has been taken. Clients SHOULD use the offset in the last GetActiveContractsResponse message to continue streaming transactions with the transaction service. Clients SHOULD NOT assume that the set of active contracts they receive reflects the state at the ledger end. Errors: - UNAUTHENTICATED: if the request does not include a valid access token - PERMISSION_DENIED: if the claims in the token are insufficient to perform a given operation - NOT_FOUND: if the request does not include a valid ledger id - INVALID_ARGUMENT: if the payload is malformed or is missing required fields (filters by party cannot be empty)

com/daml/ledger/api/v1/admin/config_management_service.proto

GetTimeModelRequest

GetTimeModelResponse

Field Type Label Description

configuration_generation

int64   The current configuration generation. The generation is a monotonically increasing integer that is incremented on each change. Used when setting the time model.

time_model

TimeModel   The current ledger time model.

SetTimeModelRequest

Field Type Label Description

submission_id

string   Submission identifier used for tracking the request and to reject duplicate submissions. Required.

maximum_record_time

google.protobuf.Timestamp   Deadline for the configuration change after which the change is rejected.

configuration_generation

int64   The current configuration generation which we’re submitting the change against. This is used to perform a compare-and-swap of the configuration to safeguard against concurrent modifications. Required.

new_time_model

TimeModel   The new time model that replaces the current one. Required.

SetTimeModelResponse

Field Type Label Description

configuration_generation

int64   The configuration generation of the committed time model.

TimeModel

Field Type Label Description

avg_transaction_latency

google.protobuf.Duration   The expected average latency of a transaction, i.e., the average time from submitting the transaction to a [[WriteService]] and the transaction being assigned a record time. Required.

min_skew

google.protobuf.Duration   The minimimum skew between ledger time and record time: lt_TX >= rt_TX - minSkew Required.

max_skew

google.protobuf.Duration   The maximum skew between ledger time and record time: lt_TX <= rt_TX + maxSkew Required.

ConfigManagementService

Status: experimental interface, will change before it is deemed production ready

Ledger configuration management service provides methods for the ledger administrator to change the current ledger configuration. The services provides methods to modify different aspects of the configuration.

Method name Request type Response type Description
GetTimeModel GetTimeModelRequest GetTimeModelResponse Return the currently active time model and the current configuration generation. Errors: - UNAUTHENTICATED: if the request does not include a valid access token - PERMISSION_DENIED: if the claims in the token are insufficient to perform a given operation
SetTimeModel SetTimeModelRequest SetTimeModelResponse Set the ledger time model. Errors: - UNAUTHENTICATED: if the request does not include a valid access token - PERMISSION_DENIED: if the claims in the token are insufficient to perform a given operation - INVALID_ARGUMENT: if arguments are invalid, or the provided configuration generation does not match the current active configuration generation. The caller is expected to retry by again fetching current time model using ‘GetTimeModel’, applying changes and resubmitting. - ABORTED: if the request is rejected or times out. Note that a timed out request may have still been committed to the ledger. Application should re-query the current time model before retrying. - UNIMPLEMENTED: if this method is not supported by the backing ledger.

com/daml/ledger/api/v1/admin/package_management_service.proto

ListKnownPackagesRequest

ListKnownPackagesResponse

Field Type Label Description

package_details

PackageDetails repeated The details of all Daml-LF packages known to backing participant. Required

PackageDetails

Field Type Label Description

package_id

string   The identity of the Daml-LF package. Must be a valid PackageIdString (as describe in value.proto). Required

package_size

uint64   Size of the package in bytes. The size of the package is given by the size of the daml_lf ArchivePayload. See further details in daml_lf.proto. Required

known_since

google.protobuf.Timestamp   Indicates since when the package is known to the backing participant. Required

source_description

string   Description provided by the backing participant describing where it got the package from. Optional

UploadDarFileRequest

Field Type Label Description

dar_file

bytes   Contains a Daml archive DAR file, which in turn is a jar like zipped container for daml_lf archives. See further details in daml_lf.proto. Required

submission_id

string   Unique submission identifier. Optional, defaults to a random identifier.

UploadDarFileResponse

An empty message that is received when the upload operation succeeded.

PackageManagementService

Status: experimental interface, will change before it is deemed production ready

Query the Daml-LF packages supported by the ledger participant and upload DAR files. We use ‘backing participant’ to refer to this specific participant in the methods of this API.

Method name Request type Response type Description
ListKnownPackages ListKnownPackagesRequest ListKnownPackagesResponse Returns the details of all Daml-LF packages known to the backing participant. Errors: - UNAUTHENTICATED: if the request does not include a valid access token - PERMISSION_DENIED: if the claims in the token are insufficient to perform a given operation
UploadDarFile UploadDarFileRequest UploadDarFileResponse Upload a DAR file to the backing participant. Depending on the ledger implementation this might also make the package available on the whole ledger. This call might not be supported by some ledger implementations. Canton could be an example, where uploading a DAR is not sufficient to render it usable, it must be activated first. This call may: - Succeed, if the package was successfully uploaded, or if the same package was already uploaded before. - Respond with a gRPC error Errors: - UNAUTHENTICATED: if the request does not include a valid access token - PERMISSION_DENIED: if the claims in the token are insufficient to perform a given operation - UNIMPLEMENTED: if DAR package uploading is not supported by the backing participant - INVALID_ARGUMENT: if the DAR file is too big or malformed. The maximum supported size is implementation specific.

com/daml/ledger/api/v1/admin/participant_pruning_service.proto

PruneRequest

Field Type Label Description

prune_up_to

string   Inclusive offset up to and at which the ledger is to be pruned.

submission_id

string   Unique submission identifier. Optional, defaults to a random identifier, used for logging.

PruneResponse

Empty for now, but may contain fields in the future

ParticipantPruningService

Prunes/truncates the “oldest” transactions from the participant (the participant Ledger Api Server plus any other participant-local state) by removing a portion of the ledger in such a way that the set of future, allowed commands are not affected.

This enables: 1. keeping the “inactive” portion of the ledger to a manageable size and 2. removing inactive state to honor the right to be forgotten.

Method name Request type Response type Description
Prune PruneRequest PruneResponse Prune the ledger specifying the offset before and at which ledger transactions should be removed. Only returns when the potentially long-running prune request ends successfully or with one of the following errors: - INVALID_ARGUMENT: if the payload, particularly the offset is malformed or missing - UNIMPLEMENTED: if the participant is based on a ledger that has not implemented pruning - INTERNAL: if the participant has encountered a failure and has potentially applied pruning partially. Such cases warrant verifying the participant health before retrying the prune with the same (or a larger, valid) offset. Successful retries after such errors ensure that different components reach a consistent pruning state.

Other GRPC errors can be returned depending on the type of condition preventing a prune: - OUT_OF_RANGE: if the participant is not yet able to prune at the specified offset, but without user intervention the offset will eventually be usable for pruning. - FAILED_PRECONDITION if some sort of user intervention is required before pruning can proceed at the specified offset.

com/daml/ledger/api/v1/admin/party_management_service.proto

AllocatePartyRequest

Field Type Label Description

party_id_hint

string   A hint to the backing participant which party ID to allocate. It can be ignored. Must be a valid PartyIdString (as described in value.proto). Optional

display_name

string   Human-readable name of the party to be added to the participant. It doesn’t have to be unique. Optional

AllocatePartyResponse

Field Type Label Description

party_details

PartyDetails    

GetParticipantIdRequest

GetParticipantIdResponse

Field Type Label Description

participant_id

string   Identifier of the participant, which SHOULD be globally unique. Must be a valid LedgerString (as describe in value.proto).

GetPartiesRequest

Field Type Label Description

parties

string repeated The stable, unique identifier of the Daml parties. Must be valid PartyIdStrings (as described in value.proto). Required

GetPartiesResponse

Field Type Label Description

party_details

PartyDetails repeated The details of the requested Daml parties by the participant, if known. The party details may not be in the same order as requested. Required

ListKnownPartiesRequest

ListKnownPartiesResponse

Field Type Label Description

party_details

PartyDetails repeated The details of all Daml parties known by the participant. Required

PartyDetails

Field Type Label Description

party

string   The stable unique identifier of a Daml party. Must be a valid PartyIdString (as described in value.proto). Required

display_name

string   Human readable name associated with the party. Caution, it might not be unique. Optional

is_local

bool   true if party is hosted by the backing participant. Required

PartyManagementService

Status: experimental interface, will change before it is deemed production ready

Inspect the party management state of a ledger participant and modify the parts that are modifiable. We use ‘backing participant’ to refer to this specific participant in the methods of this API.

Method name Request type Response type Description
GetParticipantId GetParticipantIdRequest GetParticipantIdResponse Return the identifier of the backing participant. All horizontally scaled replicas should return the same id. daml-on-sql: returns an identifier supplied on command line at launch time daml-on-kv-ledger: as above canton: returns globally unique identifier of the backing participant Errors: - UNAUTHENTICATED: if the request does not include a valid access token - PERMISSION_DENIED: if the claims in the token are insufficient to perform a given operation
GetParties GetPartiesRequest GetPartiesResponse Get the party details of the given parties. Only known parties will be returned in the list. Errors: - UNAUTHENTICATED: if the request does not include a valid access token - PERMISSION_DENIED: if the claims in the token are insufficient to perform a given operation
ListKnownParties ListKnownPartiesRequest ListKnownPartiesResponse List the parties known by the backing participant. The list returned contains parties whose ledger access is facilitated by backing participant and the ones maintained elsewhere. Errors: - UNAUTHENTICATED: if the request does not include a valid access token - PERMISSION_DENIED: if the claims in the token are insufficient to perform a given operation
AllocateParty AllocatePartyRequest AllocatePartyResponse Adds a new party to the set managed by the backing participant. Caller specifies a party identifier suggestion, the actual identifier allocated might be different and is implementation specific. This call may: - Succeed, in which case the actual allocated identifier is visible in the response. - Respond with a gRPC error Errors: - UNAUTHENTICATED: if the request does not include a valid access token - PERMISSION_DENIED: if the claims in the token are insufficient to perform a given operation - UNIMPLEMENTED: if synchronous party allocation is not supported by the backing participant - INVALID_ARGUMENT: if the provided hint and/or display name is invalid on the given ledger (see below). daml-on-sql: suggestion’s uniqueness is checked and call rejected if the identifier is already present daml-on-kv-ledger: suggestion’s uniqueness is checked by the validators in the consensus layer and call rejected if the identifier is already present. canton: completely different globally unique identifier is allocated. Behind the scenes calls to an internal protocol are made. As that protocol is richer than the surface protocol, the arguments take implicit values The party identifier suggestion must be a valid party name. Party names are required to be non-empty US-ASCII strings built from letters, digits, space, colon, minus and underscore limited to 255 chars

com/daml/ledger/api/v1/command_completion_service.proto

Checkpoint

Checkpoints may be used to:

  • detect time out of commands.
  • provide an offset which can be used to restart consumption.
Field Type Label Description

record_time

google.protobuf.Timestamp   All commands with a maximum record time below this value MUST be considered lost if their completion has not arrived before this checkpoint. Required

offset

LedgerOffset   May be used in a subsequent CompletionStreamRequest to resume the consumption of this stream at a later time. Required

CompletionEndRequest

Field Type Label Description

ledger_id

string   Must correspond to the ledger ID reported by the Ledger Identification Service. Must be a valid LedgerString (as described in value.proto). Required

trace_context

TraceContext   Server side tracing will be registered as a child of the submitted context. This field is a future extension point and is currently not supported. Optional

CompletionEndResponse

Field Type Label Description

offset

LedgerOffset   This offset can be used in a CompletionStreamRequest message. Required

CompletionStreamRequest

Field Type Label Description

ledger_id

string   Must correspond to the ledger id reported by the Ledger Identification Service. Must be a valid LedgerString (as described in value.proto). Required

application_id

string   Only completions of commands submitted with the same application_id will be visible in the stream. Must be a valid LedgerString (as described in value.proto). Required

parties

string repeated Non-empty list of parties whose data should be included. Only completions of commands for which at least one of the act_as parties is in the given set of parties will be visible in the stream. Must be a valid PartyIdString (as described in value.proto). Required

offset

LedgerOffset   This field indicates the minimum offset for completions. This can be used to resume an earlier completion stream. This offset is exclusive: the response will only contain commands whose offset is strictly greater than this. Optional, if not set the ledger uses the current ledger end offset instead.

CompletionStreamResponse

Field Type Label Description

checkpoint

Checkpoint   This checkpoint may be used to restart consumption. The checkpoint is after any completions in this response. Optional

completions

Completion repeated If set, one or more completions.

CommandCompletionService

Allows clients to observe the status of their submissions. Commands may be submitted via the Command Submission Service. The on-ledger effects of their submissions are disclosed by the Transaction Service.

Commands may fail in 2 distinct manners:

  1. Failure communicated in the gRPC error of the submission.
  2. Failure communicated in a Completion.

Only successfully submitted commands may produce a completion event.

Clients that do not receive a successful completion about their submission MUST NOT assume that it was successful. Clients SHOULD subscribe to the CompletionStream before starting to submit commands to prevent race conditions.

Interprocess tracing of command submissions may be achieved via Zipkin by filling out the trace_context field. The server will return a child context of the submitted one, (or a new one if the context was missing) on both the Completion and Transaction streams.

Method name Request type Response type Description
CompletionStream CompletionStreamRequest CompletionStreamResponse Subscribe to command completion events. Errors: - UNAUTHENTICATED: if the request does not include a valid access token - PERMISSION_DENIED: if the claims in the token are insufficient to perform a given operation - NOT_FOUND: if the request does not include a valid ledger id or if the ledger has been pruned before begin - INVALID_ARGUMENT: if the payload is malformed or is missing required fields - OUT_OF_RANGE: if the absolute offset is not before the end of the ledger
CompletionEnd CompletionEndRequest CompletionEndResponse Returns the offset after the latest completion. Errors: - UNAUTHENTICATED: if the request does not include a valid access token - PERMISSION_DENIED: if the claims in the token are insufficient to perform a given operation - NOT_FOUND: if the request does not include a valid ledger id

com/daml/ledger/api/v1/command_service.proto

SubmitAndWaitForTransactionIdResponse

Field Type Label Description

transaction_id

string   The id of the transaction that resulted from the submitted command. Must be a valid LedgerString (as described in value.proto). Required

SubmitAndWaitForTransactionResponse

Field Type Label Description

transaction

Transaction   The flat transaction that resulted from the submitted command. Required

SubmitAndWaitForTransactionTreeResponse

Field Type Label Description

transaction

TransactionTree   The transaction tree that resulted from the submitted command. Required

SubmitAndWaitRequest

These commands are atomic, and will become transactions.

Field Type Label Description

commands

Commands   The commands to be submitted. Required

trace_context

TraceContext   Server side tracing will be registered as a child of the submitted context. This field is a future extension point and is currently not supported. Optional

CommandService

Command Service is able to correlate submitted commands with completion data, identify timeouts, and return contextual information with each tracking result. This supports the implementation of stateless clients.

Method name Request type Response type Description
SubmitAndWait SubmitAndWaitRequest .google.protobuf.Empty Submits a single composite command and waits for its result. Propagates the gRPC error of failed submissions including Daml interpretation errors. Errors: - UNAUTHENTICATED: if the request does not include a valid access token - PERMISSION_DENIED: if the claims in the token are insufficient to perform a given operation - NOT_FOUND: if the request does not include a valid ledger id - INVALID_ARGUMENT: if the payload is malformed or is missing required fields - RESOURCE_EXHAUSTED: if the number of in-flight commands reached the maximum (if a limit is configured) - UNAVAILABLE: if the participant is not yet ready to submit commands or if the service has been shut down. - ABORTED: if a contract key is missing or duplicated due to for example contention on resources
SubmitAndWaitForTransactionId SubmitAndWaitRequest SubmitAndWaitForTransactionIdResponse Submits a single composite command, waits for its result, and returns the transaction id. Propagates the gRPC error of failed submissions including Daml interpretation errors. Errors: - UNAUTHENTICATED: if the request does not include a valid access token - PERMISSION_DENIED: if the claims in the token are insufficient to perform a given operation - NOT_FOUND: if the request does not include a valid ledger id - INVALID_ARGUMENT: if the payload is malformed or is missing required fields - RESOURCE_EXHAUSTED: if the number of in-flight commands reached the maximum (if a limit is configured) - UNAVAILABLE: if the participant is not yet ready to submit commands or if the service has been shut down. - ABORTED: if a contract key is missing or duplicated due to for example contention on resources
SubmitAndWaitForTransaction SubmitAndWaitRequest SubmitAndWaitForTransactionResponse Submits a single composite command, waits for its result, and returns the transaction. Propagates the gRPC error of failed submissions including Daml interpretation errors. Errors: - UNAUTHENTICATED: if the request does not include a valid access token - PERMISSION_DENIED: if the claims in the token are insufficient to perform a given operation - NOT_FOUND: if the request does not include a valid ledger id - INVALID_ARGUMENT: if the payload is malformed or is missing required fields - RESOURCE_EXHAUSTED: if the number of in-flight commands reached the maximum (if a limit is configured) - UNAVAILABLE: if the participant is not yet ready to submit commands or if the service has been shut down. - ABORTED: if a contract key is missing or duplicated due to for example contention on resources
SubmitAndWaitForTransactionTree SubmitAndWaitRequest SubmitAndWaitForTransactionTreeResponse Submits a single composite command, waits for its result, and returns the transaction tree. Propagates the gRPC error of failed submissions including Daml interpretation errors. Errors: - UNAUTHENTICATED: if the request does not include a valid access token - PERMISSION_DENIED: if the claims in the token are insufficient to perform a given operation - NOT_FOUND: if the request does not include a valid ledger id - INVALID_ARGUMENT: if the payload is malformed or is missing required fields - RESOURCE_EXHAUSTED: if the number of in-flight commands reached the maximum (if a limit is configured) - UNAVAILABLE: if the participant is not yet ready to submit commands or if the service has been shut down. - ABORTED: if a contract key is missing or duplicated due to for example contention on resources

com/daml/ledger/api/v1/command_submission_service.proto

SubmitRequest

The submitted commands will be processed atomically in a single transaction. Moreover, each Command in commands will be executed in the order specified by the request.

Field Type Label Description

commands

Commands   The commands to be submitted in a single transaction. Required

trace_context

TraceContext   Server side tracing will be registered as a child of the submitted context. This field is a future extension point and is currently not supported. Optional

CommandSubmissionService

Allows clients to attempt advancing the ledger’s state by submitting commands. The final states of their submissions are disclosed by the Command Completion Service. The on-ledger effects of their submissions are disclosed by the Transaction Service.

Commands may fail in 2 distinct manners:

  1. Failure communicated in the gRPC error of the submission.
  2. Failure communicated in a Completion.

Only successfully submitted commands may produce a completion event.

Clients that do not receive a successful completion about their submission MUST NOT assume that it was successful. Clients SHOULD subscribe to the CompletionStream before starting to submit commands to prevent race conditions.

Interprocess tracing of command submissions may be achieved via Zipkin by filling out the trace_context field. The server will return a child context of the submitted one, (or a new one if the context was missing) on both the Completion and Transaction streams.

Method name Request type Response type Description
Submit SubmitRequest .google.protobuf.Empty Submit a single composite command. Errors: - UNAUTHENTICATED: if the request does not include a valid access token - PERMISSION_DENIED: if the claims in the token are insufficient to perform a given operation - NOT_FOUND: if the request does not include a valid ledger id - INVALID_ARGUMENT: if the payload is malformed or is missing required fields - UNAVAILABLE: if the participant is not yet ready to submit commands or if the service has been shut down. - RESOURCE_EXHAUSTED: if the participant or the ledger is overloaded. Clients should back off exponentially and retry. - ABORTED: if a contract key is missing or duplicated due to for example contention on resources

com/daml/ledger/api/v1/commands.proto

Command

A command can either create a new contract or exercise a choice on an existing contract.

Field Type Label Description

create

CreateCommand    

exercise

ExerciseCommand    

exerciseByKey

ExerciseByKeyCommand    

createAndExercise

CreateAndExerciseCommand    

Commands

A composite command that groups multiple commands together.

Field Type Label Description

ledger_id

string   Must correspond to the ledger ID reported by the Ledger Identification Service. Must be a valid LedgerString (as described in value.proto). Required

workflow_id

string   Identifier of the on-ledger workflow that this command is a part of. Must be a valid LedgerString (as described in value.proto). Optional

application_id

string   Uniquely identifies the application (or its part) that issued the command. This is used in tracing across different components and to let applications subscribe to their own submissions only. Must be a valid LedgerString (as described in value.proto). Required

command_id

string   Uniquely identified the command. This identifier should be unique for each new command within an application domain, i.e., the triple (application_id, party, command_id) must be unique. It can be used for matching the requests with their respective completions. Must be a valid LedgerString (as described in value.proto). Required

party

string   Party on whose behalf the command should be executed. If ledger API authorization is enabled, then the authorization metadata must authorize the sender of the request to act on behalf of the given party. Must be a valid PartyIdString (as described in value.proto). Deprecated in favor of the act_as field. If both are set, then the effective list of parties on whose behalf the command should be executed is the union of all parties listed in party and act_as. Optional

commands

Command repeated Individual elements of this atomic command. Must be non-empty. Required

deduplication_time

google.protobuf.Duration   The length of the time window during which all commands with the same act_as parties and the same command ID will be deduplicated. Duplicate commands submitted before the end of this window return an ALREADY_EXISTS error. Optional

min_ledger_time_abs

google.protobuf.Timestamp   Lower bound for the ledger time assigned to the resulting transaction. Note: The ledger time of a transaction is assigned as part of command interpretation. Use this property if you expect that command interpretation will take a considerate amount of time, such that by the time the resulting transaction is sequenced, its assigned ledger time is not valid anymore. Must not be set at the same time as min_ledger_time_rel. Optional

min_ledger_time_rel

google.protobuf.Duration   Same as min_ledger_time_abs, but specified as a duration, starting from the time the command is received by the server. Must not be set at the same time as min_ledger_time_abs. Optional

act_as

string repeated Set of parties on whose behalf the command should be executed. If ledger API authorization is enabled, then the authorization metadata must authorize the sender of the request to act on behalf of each of the given parties. This field supersedes the party field. The effective set of parties on whose behalf the command should be executed is the union of all parties listed in party and act_as, which must be non-empty. Each element must be a valid PartyIdString (as described in value.proto). Optional

read_as

string repeated Set of parties on whose behalf (in addition to all parties listed in act_as) contracts can be retrieved. This affects Daml operations such as fetch, fetchByKey, lookupByKey, exercise, and exerciseByKey. Note: A participant node of a Daml network can host multiple parties. Each contract present on the participant node is only visible to a subset of these parties. A command can only use contracts that are visible to at least one of the parties in act_as or read_as. This visibility check is independent from the Daml authorization rules for fetch operations. If ledger API authorization is enabled, then the authorization metadata must authorize the sender of the request to read contract data on behalf of each of the given parties. Optional

CreateAndExerciseCommand

Create a contract and exercise a choice on it in the same transaction.

Field Type Label Description

template_id

Identifier   The template of the contract the client wants to create. Required

create_arguments

Record   The arguments required for creating a contract from this template. Required

choice

string   The name of the choice the client wants to exercise. Must be a valid NameString (as described in value.proto). Required

choice_argument

Value   The argument for this choice. Required

CreateCommand

Create a new contract instance based on a template.

Field Type Label Description

template_id

Identifier   The template of contract the client wants to create. Required

create_arguments

Record   The arguments required for creating a contract from this template. Required

ExerciseByKeyCommand

Exercise a choice on an existing contract specified by its key.

Field Type Label Description

template_id

Identifier   The template of contract the client wants to exercise. Required

contract_key

Value   The key of the contract the client wants to exercise upon. Required

choice

string   The name of the choice the client wants to exercise. Must be a valid NameString (as described in value.proto) Required

choice_argument

Value   The argument for this choice. Required

ExerciseCommand

Exercise a choice on an existing contract.

Field Type Label Description

template_id

Identifier   The template of contract the client wants to exercise. Required

contract_id

string   The ID of the contract the client wants to exercise upon. Must be a valid LedgerString (as described in value.proto). Required

choice

string   The name of the choice the client wants to exercise. Must be a valid NameString (as described in value.proto) Required

choice_argument

Value   The argument for this choice. Required

com/daml/ledger/api/v1/completion.proto

Completion

A completion represents the status of a submitted command on the ledger: it can be successful or failed.

Field Type Label Description

command_id

string   The ID of the succeeded or failed command. Must be a valid LedgerString (as described in value.proto). Required

status

google.rpc.Status   Identifies the exact type of the error. For example, malformed or double spend transactions will result in a INVALID_ARGUMENT status. Transactions with invalid time time windows (which may be valid at a later date) will result in an ABORTED error. Optional

transaction_id

string   The transaction_id of the transaction that resulted from the command with command_id. Only set for successfully executed commands. Must be a valid LedgerString (as described in value.proto). Optional

trace_context

TraceContext   The trace context submitted with the command. This field is a future extension point and is currently not supported. Optional

com/daml/ledger/api/v1/event.proto

ArchivedEvent

Records that a contract has been archived, and choices may no longer be exercised on it.

Field Type Label Description

event_id

string   The ID of this particular event. Must be a valid LedgerString (as described in value.proto). Required

contract_id

string   The ID of the archived contract. Must be a valid LedgerString (as described in value.proto). Required

template_id

Identifier   The template of the archived contract. Required

witness_parties

string repeated The parties that are notified of this event. For ArchivedEvent`s, these are the intersection of the stakeholders of the contract in question and the parties specified in the `TransactionFilter. The stakeholders are the union of the signatories and the observers of the contract. Each one of its elements must be a valid PartyIdString (as descibed in value.proto). Required

CreatedEvent

Records that a contract has been created, and choices may now be exercised on it.

Field Type Label Description

event_id

string   The ID of this particular event. Must be a valid LedgerString (as described in value.proto). Required

contract_id

string   The ID of the created contract. Must be a valid LedgerString (as described in value.proto). Required

template_id

Identifier   The template of the created contract. Required

contract_key

Value   The key of the created contract, if defined. Optional

create_arguments

Record   The arguments that have been used to create the contract. Required

witness_parties

string repeated The parties that are notified of this event. When a CreatedEvent is returned as part of a transaction tree, this will include all the parties specified in the TransactionFilter that are informees of the event. If served as part of a flat transaction those will be limited to all parties specified in the TransactionFilter that are stakeholders of the contract (i.e. either signatories or observers). Required

signatories

string repeated The signatories for this contract as specified by the template. Required

observers

string repeated The observers for this contract as specified explicitly by the template or implicitly as choice controllers. Required

agreement_text

google.protobuf.StringValue   The agreement text of the contract. We use StringValue to properly reflect optionality on the wire for backwards compatibility. This is necessary since the empty string is an acceptable (and in fact the default) agreement text, but also the default string in protobuf. This means a newer client works with an older sandbox seamlessly. Optional

Event

An event in the flat transaction stream can either be the creation or the archiving of a contract.

In the transaction service the events are restricted to the events visible for the parties specified in the transaction filter. Each event message type below contains a witness_parties field which indicates the subset of the requested parties that can see the event in question. In the flat transaction stream you’ll only receive events that have witnesses.

Field Type Label Description

created

CreatedEvent    

archived

ArchivedEvent    

ExercisedEvent

Records that a choice has been exercised on a target contract.

Field Type Label Description

event_id

string   The ID of this particular event. Must be a valid LedgerString (as described in value.proto). Required

contract_id

string   The ID of the target contract. Must be a valid LedgerString (as described in value.proto). Required

template_id

Identifier   The template of the target contract. Required

choice

string   The choice that’s been exercised on the target contract. Must be a valid NameString (as described in value.proto). Required

choice_argument

Value   The argument the choice was made with. Required

acting_parties

string repeated The parties that made the choice. Each element must be a valid PartyIdString (as described in value.proto). Required

consuming

bool   If true, the target contract may no longer be exercised. Required

witness_parties

string repeated The parties that are notified of this event. The witnesses of an exercise node will depend on whether the exercise was consuming or not. If consuming, the witnesses are the union of the stakeholders and the actors. If not consuming, the witnesses are the union of the signatories and the actors. Note that the actors might not necessarily be observers and thus signatories. This is the case when the controllers of a choice are specified using “flexible controllers”, using the choice … controller syntax, and said controllers are not explicitly marked as observers. Each element must be a valid PartyIdString (as described in value.proto). Required

child_event_ids

string repeated References to further events in the same transaction that appeared as a result of this ExercisedEvent. It contains only the immediate children of this event, not all members of the subtree rooted at this node. Each element must be a valid LedgerString (as described in value.proto). Optional

exercise_result

Value   The result of exercising the choice Required

com/daml/ledger/api/v1/ledger_configuration_service.proto

GetLedgerConfigurationRequest

Field Type Label Description

ledger_id

string   Must correspond to the ledger ID reported by the Ledger Identification Service. Must be a valid LedgerString (as described in value.proto). Required

trace_context

TraceContext   Server side tracing will be registered as a child of the submitted context. This field is a future extension point and is currently not supported. Optional

GetLedgerConfigurationResponse

Field Type Label Description

ledger_configuration

LedgerConfiguration   The latest ledger configuration.

LedgerConfiguration

LedgerConfiguration contains parameters of the ledger instance that may be useful to clients.

Field Type Label Description

max_deduplication_time

google.protobuf.Duration   The maximum value for the deduplication_time parameter of command submissions (as described in commands.proto). This defines the maximum time window during which commands can be deduplicated.

LedgerConfigurationService

LedgerConfigurationService allows clients to subscribe to changes of the ledger configuration.

Method name Request type Response type Description
GetLedgerConfiguration GetLedgerConfigurationRequest GetLedgerConfigurationResponse Returns the latest configuration as the first response, and publishes configuration updates in the same stream. Errors: - UNAUTHENTICATED: if the request does not include a valid access token - PERMISSION_DENIED: if the claims in the token are insufficient to perform a given operation - NOT_FOUND: if the request does not include a valid ledger id

com/daml/ledger/api/v1/ledger_identity_service.proto

GetLedgerIdentityRequest

Field Type Label Description

trace_context

TraceContext   Server side tracing will be registered as a child of the submitted context. This field is a future extension point and is currently not supported. Optional

GetLedgerIdentityResponse

Field Type Label Description

ledger_id

string   The ID of the ledger exposed by the server. Must be a valid LedgerString (as described in value.proto). Required

LedgerIdentityService

Allows clients to verify that the server they are communicating with exposes the ledger they wish to operate on. Note that every ledger has a unique ID.

Method name Request type Response type Description
GetLedgerIdentity GetLedgerIdentityRequest GetLedgerIdentityResponse Clients may call this RPC to return the identifier of the ledger they are connected to. Errors: - UNAUTHENTICATED: if the request does not include a valid access token - PERMISSION_DENIED: if the claims in the token are insufficient to perform a given operation

com/daml/ledger/api/v1/ledger_offset.proto

LedgerOffset

Describes a specific point on the ledger.

The Ledger API endpoints that take offsets allow to specify portions of the ledger that are relevant for the client to read.

Offsets returned by the Ledger API can be used as-is (e.g. to keep track of processed transactions and provide a restart point to use in case of need).

The format of absolute offsets is opaque to the client: no client-side transformation of an offset is guaranteed to return a meaningful offset.

The server implementation ensures internally that offsets are lexicographically comparable.

Field Type Label Description

absolute

string   The format of this string is specific to the ledger and opaque to the client.

boundary

LedgerOffset.LedgerBoundary    

LedgerOffset.LedgerBoundary

Name Number Description

LEDGER_BEGIN

0 Refers to the first transaction.

LEDGER_END

1 Refers to the currently last transaction, which is a moving target.

com/daml/ledger/api/v1/package_service.proto

GetPackageRequest

Field Type Label Description

ledger_id

string   Must correspond to the ledger ID reported by the Ledger Identification Service. Must be a valid LedgerString (as described in value.proto). Required

package_id

string   The ID of the requested package. Must be a valid PackageIdString (as described in value.proto). Required

trace_context

TraceContext   Server side tracing will be registered as a child of the submitted context. This field is a future extension point and is currently not supported. Optional

GetPackageResponse

Field Type Label Description

hash_function

HashFunction   The hash function we use to calculate the hash. Required

archive_payload

bytes   Contains a daml_lf ArchivePayload. See further details in daml_lf.proto. Required

hash

string   The hash of the archive payload, can also used as a package_id. Must be a valid PackageIdString (as described in value.proto). Required

GetPackageStatusRequest

Field Type Label Description

ledger_id

string   Must correspond to the ledger ID reported by the Ledger Identification Service. Must be a valid LedgerString (as described in value.proto). Required

package_id

string   The ID of the requested package. Must be a valid PackageIdString (as described in value.proto). Required

trace_context

TraceContext   Server side tracing will be registered as a child of the submitted context. This field is a future extension point and is currently not supported. Optional

GetPackageStatusResponse

Field Type Label Description

package_status

PackageStatus   The status of the package.

ListPackagesRequest

Field Type Label Description

ledger_id

string   Must correspond to the ledger ID reported by the Ledger Identification Service. Must be a valid LedgerString (as described in value.proto). Required

trace_context

TraceContext   Server side tracing will be registered as a child of the submitted context. This field is a future extension point and is currently not supported. Optional

ListPackagesResponse

Field Type Label Description

package_ids

string repeated The IDs of all Daml-LF packages supported by the server. Each element must be a valid PackageIdString (as described in value.proto). Required

HashFunction

Name Number Description

SHA256

0  

PackageStatus

Name Number Description

UNKNOWN

0 The server is not aware of such a package.

REGISTERED

1 The server is able to execute Daml commands operating on this package.

PackageService

Allows clients to query the Daml-LF packages that are supported by the server.

Method name Request type Response type Description
ListPackages ListPackagesRequest ListPackagesResponse Returns the identifiers of all supported packages. Errors: - UNAUTHENTICATED: if the request does not include a valid access token - PERMISSION_DENIED: if the claims in the token are insufficient to perform a given operation - NOT_FOUND: if the request does not include a valid ledger id
GetPackage GetPackageRequest GetPackageResponse Returns the contents of a single package. Errors: - UNAUTHENTICATED: if the request does not include a valid access token - PERMISSION_DENIED: if the claims in the token are insufficient to perform a given operation - NOT_FOUND: if the requested package is unknown
GetPackageStatus GetPackageStatusRequest GetPackageStatusResponse Returns the status of a single package. Errors: - UNAUTHENTICATED: if the request does not include a valid access token - PERMISSION_DENIED: if the claims in the token are insufficient to perform a given operation - NOT_FOUND: if the requested package is unknown

com/daml/ledger/api/v1/testing/reset_service.proto

ResetRequest

Field Type Label Description

ledger_id

string   Must correspond to the ledger ID reported by the Ledger Identification Service. Must be a valid LedgerString (as describe in value.proto). Required

ResetService

Service to reset the ledger state. The goal here is to be able to reset the state in a way that’s much faster compared to restarting the whole ledger application (be it a sandbox or the real ledger server).

Note that all state present in the ledger implementation will be reset, most importantly including the ledger ID. This means that clients will have to re-fetch the ledger ID from the identity service after hitting this endpoint.

The semantics are as follows:

  • When the reset service returns the reset is initiated, but not completed;
  • While the reset is performed, the ledger will not accept new requests. In fact we guarantee that ledger stops accepting new requests by the time the response to Reset is delivered;
  • In-flight requests might be aborted, we make no guarantees on when or how quickly this happens;
  • The ledger might be unavailable for a period of time before the reset is complete.

Given the above, the recommended mode of operation for clients of the reset endpoint is to call it, then call the ledger identity endpoint in a retry loop that will tolerate a brief window when the ledger is down, and resume operation as soon as the new ledger ID is delivered.

Note that this service will be available on the sandbox and might be available in some other testing environments, but will never be available in production.

Method name Request type Response type Description
Reset ResetRequest .google.protobuf.Empty Resets the ledger state. Note that loaded DARs won’t be removed – this only rolls back the ledger to genesis.

com/daml/ledger/api/v1/testing/time_service.proto

GetTimeRequest

Field Type Label Description

ledger_id

string   Must correspond to the ledger ID reported by the Ledger Identification Service. Must be a valid LedgerString (as describe in value.proto). Required

GetTimeResponse

Field Type Label Description

current_time

google.protobuf.Timestamp   The current time according to the ledger server.

SetTimeRequest

Field Type Label Description

ledger_id

string   Must correspond to the ledger ID reported by the Ledger Identification Service. Must be a valid LedgerString (as describe in value.proto). Required

current_time

google.protobuf.Timestamp   MUST precisely match the current time as it’s known to the ledger server.

new_time

google.protobuf.Timestamp   The time the client wants to set on the ledger. MUST be a point int time after current_time.

TimeService

Optional service, exposed for testing static time scenarios.

Method name Request type Response type Description
GetTime GetTimeRequest GetTimeResponse Returns a stream of time updates. Always returns at least one response, where the first one is the current time. Subsequent responses are emitted whenever the ledger server’s time is updated.
SetTime SetTimeRequest .google.protobuf.Empty Allows clients to change the ledger’s clock in an atomic get-and-set operation. Errors: - INVALID_ARGUMENT: if current_time is invalid (it MUST precisely match the current time as it’s known to the ledger server)

com/daml/ledger/api/v1/trace_context.proto

TraceContext

Data structure to propagate Zipkin trace information. See https://github.com/openzipkin/b3-propagation Trace identifiers are 64 or 128-bit, but all span identifiers within a trace are 64-bit. All identifiers are opaque.

Field Type Label Description

trace_id_high

uint64   If present, this is the high 64 bits of the 128-bit identifier. Otherwise the trace ID is 64 bits long.

trace_id

uint64   The TraceId is 64 or 128-bit in length and indicates the overall ID of the trace. Every span in a trace shares this ID.

span_id

uint64   The SpanId is 64-bit in length and indicates the position of the current operation in the trace tree. The value should not be interpreted: it may or may not be derived from the value of the TraceId.

parent_span_id

google.protobuf.UInt64Value   The ParentSpanId is 64-bit in length and indicates the position of the parent operation in the trace tree. When the span is the root of the trace tree, the ParentSpanId is absent.

sampled

bool   When the sampled decision is accept, report this span to the tracing system. When it is reject, do not. When B3 attributes are sent without a sampled decision, the receiver should make one. Once the sampling decision is made, the same value should be consistently sent downstream.

com/daml/ledger/api/v1/transaction.proto

Transaction

Filtered view of an on-ledger transaction.

Field Type Label Description

transaction_id

string   Assigned by the server. Useful for correlating logs. Must be a valid LedgerString (as described in value.proto). Required

command_id

string   The ID of the command which resulted in this transaction. Missing for everyone except the submitting party. Must be a valid LedgerString (as described in value.proto). Optional

workflow_id

string   The workflow ID used in command submission. Must be a valid LedgerString (as described in value.proto). Optional

effective_at

google.protobuf.Timestamp   Ledger effective time. Must be a valid LedgerString (as described in value.proto). Required

events

Event repeated The collection of events. Only contains CreatedEvent or ArchivedEvent. Required

offset

string   The absolute offset. The format of this field is described in ledger_offset.proto. Required

trace_context

TraceContext   Zipkin trace context. This field is a future extension point and is currently not supported. Optional

TransactionTree

Complete view of an on-ledger transaction.

Field Type Label Description

transaction_id

string   Assigned by the server. Useful for correlating logs. Must be a valid LedgerString (as described in value.proto). Required

command_id

string   The ID of the command which resulted in this transaction. Missing for everyone except the submitting party. Must be a valid LedgerString (as described in value.proto). Optional

workflow_id

string   The workflow ID used in command submission. Only set if the workflow_id for the command was set. Must be a valid LedgerString (as described in value.proto). Optional

effective_at

google.protobuf.Timestamp   Ledger effective time. Required

offset

string   The absolute offset. The format of this field is described in ledger_offset.proto. Required

events_by_id

TransactionTree.EventsByIdEntry repeated Changes to the ledger that were caused by this transaction. Nodes of the transaction tree. Each key be a valid LedgerString (as describe in value.proto). Required

root_event_ids

string repeated Roots of the transaction tree. Each element must be a valid LedgerString (as describe in value.proto). The elements are in the same order as the commands in the corresponding Commands object that triggerd this transaction. Required

trace_context

TraceContext   Zipkin trace context. This field is a future extension point and is currently not supported. Optional

TransactionTree.EventsByIdEntry

Field Type Label Description

key

string    

value

TreeEvent    

TreeEvent

Each tree event message type below contains a witness_parties field which indicates the subset of the requested parties that can see the event in question.

Note that transaction trees might contain events with _no_ witness parties, which were included simply because they were children of events which have witnesses.

Field Type Label Description

created

CreatedEvent    

exercised

ExercisedEvent    

com/daml/ledger/api/v1/transaction_filter.proto

Filters

Field Type Label Description

inclusive

InclusiveFilters   If not set, no filters will be applied. Optional

InclusiveFilters

If no internal fields are set, no filters will be applied.

Field Type Label Description

template_ids

Identifier repeated A collection of templates. SHOULD NOT contain duplicates. Required

TransactionFilter

Used for filtering Transaction and Active Contract Set streams. Determines which on-ledger events will be served to the client.

Field Type Label Description

filters_by_party

TransactionFilter.FiltersByPartyEntry repeated Keys of the map determine which parties’ on-ledger transactions are being queried. Values of the map determine which events are disclosed in the stream per party. At the minimum, a party needs to set an empty Filters message to receive any events. Each key must be a valid PartyIdString (as described in value.proto). Required

TransactionFilter.FiltersByPartyEntry

Field Type Label Description

key

string    

value

Filters    

com/daml/ledger/api/v1/transaction_service.proto

GetFlatTransactionResponse

Field Type Label Description

transaction

Transaction    

GetLedgerEndRequest

Field Type Label Description

ledger_id

string   Must correspond to the ledger ID reported by the Ledger Identification Service. Must be a valid LedgerString (as describe in value.proto). Required

trace_context

TraceContext   Server side tracing will be registered as a child of the submitted context. This field is a future extension point and is currently not supported. Optional

GetLedgerEndResponse

Field Type Label Description

offset

LedgerOffset   The absolute offset of the current ledger end.

GetTransactionByEventIdRequest

Field Type Label Description

ledger_id

string   Must correspond to the ledger ID reported by the Ledger Identification Service. Must be a valid LedgerString (as described in value.proto). Required

event_id

string   The ID of a particular event. Must be a valid LedgerString (as described in value.proto). Required

requesting_parties

string repeated The parties whose events the client expects to see. Events that are not visible for the parties in this collection will not be present in the response. Each element must be a valid PartyIdString (as described in value.proto). Required

trace_context

TraceContext   Server side tracing will be registered as a child of the submitted context. This field is a future extension point and is currently not supported. Optional

GetTransactionByIdRequest

Field Type Label Description

ledger_id

string   Must correspond to the ledger ID reported by the Ledger Identification Service. Must be a valid LedgerString (as describe in value.proto). Required

transaction_id

string   The ID of a particular transaction. Must be a valid LedgerString (as describe in value.proto). Required

requesting_parties

string repeated The parties whose events the client expects to see. Events that are not visible for the parties in this collection will not be present in the response. Each element be a valid PartyIdString (as describe in value.proto). Required

trace_context

TraceContext   Server side tracing will be registered as a child of the submitted context. This field is a future extension point and is currently not supported. Optional

GetTransactionResponse

Field Type Label Description

transaction

TransactionTree    

GetTransactionTreesResponse

Field Type Label Description

transactions

TransactionTree repeated The list of transaction trees that matches the filter in GetTransactionsRequest for the GetTransactionTrees method.

GetTransactionsRequest

Field Type Label Description

ledger_id

string   Must correspond to the ledger ID reported by the Ledger Identification Service. Must be a valid LedgerString (as described in value.proto). Required

begin

LedgerOffset   Beginning of the requested ledger section. This offset is exclusive: the response will only contain transactions whose offset is strictly greater than this. Required

end

LedgerOffset   End of the requested ledger section. This offset is inclusive: the response will only contain transactions whose offset is less than or equal to this. Optional, if not set, the stream will not terminate.

filter

TransactionFilter   Requesting parties with template filters. Template filters must be empty for GetTransactionTrees requests. Required

verbose

bool   If enabled, values served over the API will contain more information than strictly necessary to interpret the data. In particular, setting the verbose flag to true triggers the ledger to include labels for record fields. Optional

trace_context

TraceContext   Server side tracing will be registered as a child of the submitted context. This field is a future extension point and is currently not supported. Optional

GetTransactionsResponse

Field Type Label Description

transactions

Transaction repeated The list of transactions that matches the filter in GetTransactionsRequest for the GetTransactions method.

TransactionService

Allows clients to read transactions from the ledger.

Method name Request type Response type Description
GetTransactions GetTransactionsRequest GetTransactionsResponse Read the ledger’s filtered transaction stream for a set of parties. Lists only creates and archives, but not other events. Omits all events on transient contracts, i.e., contracts that were both created and archived in the same transaction. Errors: - UNAUTHENTICATED: if the request does not include a valid access token - PERMISSION_DENIED: if the claims in the token are insufficient to perform a given operation - NOT_FOUND: if the request does not include a valid ledger id or if the ledger has been pruned before begin - INVALID_ARGUMENT: if the payload is malformed or is missing required fields (e.g. if before is not before end) - OUT_OF_RANGE: if the begin parameter value is not before the end of the ledger
GetTransactionTrees GetTransactionsRequest GetTransactionTreesResponse Read the ledger’s complete transaction tree stream for a set of parties. The stream can be filtered only by parties, but not templates (template filter must be empty). Errors: - UNAUTHENTICATED: if the request does not include a valid access token - PERMISSION_DENIED: if the claims in the token are insufficient to perform a given operation - NOT_FOUND: if the request does not include a valid ledger id or if the ledger has been pruned before begin - INVALID_ARGUMENT: if the payload is malformed or is missing required fields (e.g. if before is not before end) - OUT_OF_RANGE: if the begin parameter value is not before the end of the ledger
GetTransactionByEventId GetTransactionByEventIdRequest GetTransactionResponse Lookup a transaction tree by the ID of an event that appears within it. For looking up a transaction instead of a transaction tree, please see GetFlatTransactionByEventId Errors: - UNAUTHENTICATED: if the request does not include a valid access token - PERMISSION_DENIED: if the claims in the token are insufficient to perform a given operation - NOT_FOUND: if the request does not include a valid ledger id or no such transaction exists - INVALID_ARGUMENT: if the payload is malformed or is missing required fields (e.g. if requesting parties are invalid or empty)
GetTransactionById GetTransactionByIdRequest GetTransactionResponse Lookup a transaction tree by its ID. For looking up a transaction instead of a transaction tree, please see GetFlatTransactionById Errors: - UNAUTHENTICATED: if the request does not include a valid access token - PERMISSION_DENIED: if the claims in the token are insufficient to perform a given operation - NOT_FOUND: if the request does not include a valid ledger id or no such transaction exists - INVALID_ARGUMENT: if the payload is malformed or is missing required fields (e.g. if requesting parties are invalid or empty)
GetFlatTransactionByEventId GetTransactionByEventIdRequest GetFlatTransactionResponse Lookup a transaction by the ID of an event that appears within it. Errors: - UNAUTHENTICATED: if the request does not include a valid access token - PERMISSION_DENIED: if the claims in the token are insufficient to perform a given operation - NOT_FOUND: if the request does not include a valid ledger id or no such transaction exists - INVALID_ARGUMENT: if the payload is malformed or is missing required fields (e.g. if requesting parties are invalid or empty)
GetFlatTransactionById GetTransactionByIdRequest GetFlatTransactionResponse Lookup a transaction by its ID. Errors: - UNAUTHENTICATED: if the request does not include a valid access token - PERMISSION_DENIED: if the claims in the token are insufficient to perform a given operation - NOT_FOUND: if the request does not include a valid ledger id or no such transaction exists - INVALID_ARGUMENT: if the payload is malformed or is missing required fields (e.g. if requesting parties are invalid or empty)
GetLedgerEnd GetLedgerEndRequest GetLedgerEndResponse Get the current ledger end. Subscriptions started with the returned offset will serve transactions created after this RPC was called. Errors: - UNAUTHENTICATED: if the request does not include a valid access token - PERMISSION_DENIED: if the claims in the token are insufficient to perform a given operation - NOT_FOUND: if the request does not include a valid ledger id or no such transaction exists

com/daml/ledger/api/v1/value.proto

Enum

A value with finite set of alternative representations.

Field Type Label Description

enum_id

Identifier   Omitted from the transaction stream when verbose streaming is not enabled. Optional when submitting commands.

constructor

string   Determines which of the Variant’s alternatives is encoded in this message. Must be a valid NameString. Required

GenMap

Field Type Label Description

entries

GenMap.Entry repeated  

GenMap.Entry

Field Type Label Description

key

Value    

value

Value    

Identifier

Unique identifier of an entity.

Field Type Label Description

package_id

string   The identifier of the Daml package that contains the entity. Must be a valid PackageIdString. Required

module_name

string   The dot-separated module name of the identifier. Required

entity_name

string   The dot-separated name of the entity (e.g. record, template, …) within the module. Required

List

A homogenous collection of values.

Field Type Label Description

elements

Value repeated The elements must all be of the same concrete value type. Optional

Map

Field Type Label Description

entries

Map.Entry repeated  

Map.Entry

Field Type Label Description

key

string    

value

Value    

Optional

Corresponds to Java’s Optional type, Scala’s Option, and Haskell’s Maybe. The reason why we need to wrap this in an additional message is that we need to be able to encode the None case in the Value oneof.

Field Type Label Description

value

Value   optional

Record

Contains nested values.

Field Type Label Description

record_id

Identifier   Omitted from the transaction stream when verbose streaming is not enabled. Optional when submitting commands.

fields

RecordField repeated The nested values of the record. Required

RecordField

A named nested value within a record.

Field Type Label Description

label

string   When reading a transaction stream, it’s omitted if verbose streaming is not enabled. When submitting a commmand, it’s optional: - if all keys within a single record are present, the order in which fields appear does not matter. however, each key must appear exactly once. - if any of the keys within a single record are omitted, the order of fields MUST match the order of declaration in the Daml template. Must be a valid NameString

value

Value   A nested value of a record. Required

Value

Encodes values that the ledger accepts as command arguments and emits as contract arguments.

The values encoding use different four classes of strings as identifiers. Those classes are defined as follow: - NameStrings are strings that match the regexp [A-Za-z\$_][A-Za-z0-9\$_]*. - PackageIdStrings are strings that match the regexp [A-Za-z0-9\-_ ]+. - PartyIdStrings are strings that match the regexp [A-Za-z0-9:\-_ ]+. - LedgerStrings are strings that match the regexp [A-Za-z0-9#:\-_/ ]+.

Field Type Label Description

record

Record    

variant

Variant    

contract_id

string   Identifier of an on-ledger contract. Commands which reference an unknown or already archived contract ID will fail. Must be a valid LedgerString.

list

List   Represents a homogeneous list of values.

int64

sint64    

numeric

string   A Numeric, that is a decimal value with precision 38 (at most 38 significant digits) and a scale between 0 and 37 (significant digits on the right of the decimal point). The field has to match the regex [+-]?d{1,38}(.d{0,37})? and should be representable by a Numeric without loss of precision.

text

string   A string.

timestamp

sfixed64   Microseconds since the UNIX epoch. Can go backwards. Fixed since the vast majority of values will be greater than 2^28, since currently the number of microseconds since the epoch is greater than that. Range: 0001-01-01T00:00:00Z to 9999-12-31T23:59:59.999999Z, so that we can convert to/from https://www.ietf.org/rfc/rfc3339.txt

party

string   An agent operating on the ledger. Must be a valid PartyIdString.

bool

bool   True or false.

unit

google.protobuf.Empty   This value is used for example for choices that don’t take any arguments.

date

int32   Days since the unix epoch. Can go backwards. Limited from 0001-01-01 to 9999-12-31, also to be compatible with https://www.ietf.org/rfc/rfc3339.txt

optional

Optional   The Optional type, None or Some

map

Map   The Map type

enum

Enum   The Enum type

gen_map

GenMap   The GenMap type

Variant

A value with alternative representations.

Field Type Label Description

variant_id

Identifier   Omitted from the transaction stream when verbose streaming is not enabled. Optional when submitting commands.

constructor

string   Determines which of the Variant’s alternatives is encoded in this message. Must be a valid NameString. Required

value

Value   The value encoded within the Variant. Required

com/daml/ledger/api/v1/version_service.proto

GetLedgerApiVersionRequest

Field Type Label Description

ledger_id

string   Must correspond to the ledger ID reported by the Ledger Identification Service. Must be a valid LedgerString (as described in value.proto). Required

GetLedgerApiVersionResponse

Field Type Label Description

version

string   The version of the ledger API

VersionService

Allows clients to retrieve information about the ledger API version

Method name Request type Response type Description
GetLedgerApiVersion GetLedgerApiVersionRequest GetLedgerApiVersionResponse Read the Ledger API version

Scalar Value Types

.proto type Notes C++ type Java type Python type

double

  double double float

float

  float float float

int32

Uses variable-length encoding. Inefficient for encoding negative numbers – if your field is likely to have negative values, use sint32 instead. int32 int int

int64

Uses variable-length encoding. Inefficient for encoding negative numbers – if your field is likely to have negative values, use sint64 instead. int64 long int/long

uint32

Uses variable-length encoding. uint32 int int/long

uint64

Uses variable-length encoding. uint64 long int/long

sint32

Uses variable-length encoding. Signed int value. These more efficiently encode negative numbers than regular int32s. int32 int int

sint64

Uses variable-length encoding. Signed int value. These more efficiently encode negative numbers than regular int64s. int64 long int/long

fixed32

Always four bytes. More efficient than uint32 if values are often greater than 2^28. uint32 int int

fixed64

Always eight bytes. More efficient than uint64 if values are often greater than 2^56. uint64 long int/long

sfixed32

Always four bytes. int32 int int

sfixed64

Always eight bytes. int64 long int/long

bool

  bool boolean boolean

string

A string must always contain UTF-8 encoded or 7-bit ASCII text. string String str/unicode

bytes

May contain any arbitrary sequence of bytes. string ByteString str