Certain Daml ledgers can interoperate with other Daml ledgers. That is, the contracts created on one ledger can be used and archived in transactions on other ledgers. Some Participant Nodes can connect to multiple ledgers and provide their parties unified access to those ledgers via the Ledger API. For example, when an organization initially deploys two workflows to two Daml ledgers, it can later compose those workflows into a larger workflow that spans both ledgers.
Interoperability may limit the visibility a Participant Node has into a party’s ledger projection, i.e., its local ledger, when the party is hosted on multiple Participant Nodes. These limitations influence what parties can observe via the Ledger API of each Participant Node. In particular, interoperability affects which events a party observes and their order. This document explains the visibility limitations due to interoperability and their consequences for the Transaction Service, by example and formally by introducing interoperable versions of causality graphs and projections.
The presentation assumes that you are familiar with the following concepts:
Interoperability for Daml ledgers is under active development. This document describes the vision for interoperability and gives an idea of how the Ledger API services may change and what guarantees are provided. The described services and guarantees may change without notice as the interoperability implementation proceeds.
Participant Nodes connect to Daml ledgers and parties access projections of these ledgers via the Ledger API. The following picture shows such a setup.
The components in this diagram are the following:
- There is a set of interoperable Daml ledgers: Ledger 1 (green) and Ledger 2 (yellow).
- Each Participant Node is connected to a subset of the Daml ledgers.
- Participant Nodes 1 and 3 are connected to Ledger 1 and 2.
- Participant Node 2 is connected to Ledger 1 only.
- Participant Nodes host parties on a subset of the Daml ledgers they are connected to.
A Participant Node provides a party access to the Daml ledgers that it hosts the party on.
- Participant Node 1 hosts Alice on Ledger 1 and 2.
- Participant Node 2 hosts Alice on Ledger 1.
- Participant Node 3 hosts the painter on Ledger 1 and 2.
Aggregation at the participant¶
The Participant Node assembles the updates from these ledgers and outputs them via the party’s Transaction Service and Active Contract Service. When a Participant Node hosts a party only on a subset of the interoperable Daml ledgers, then the transaction and active contract services of the Participant Node are derived only from those ledgers.
For example, in the above topology, when a transaction creates a contract with stakeholder Alice on Ledger 2, then P1’s transaction stream for Alice will emit this transaction and report the contract as active, but Alice’s stream at P2 will not.
Enter and Leave events¶
With interoperability, a transaction can use a contract whose creation was recorded on a different ledger.
In the above topology, e.g., one transaction creates a contract c1 with stakeholder Alice on Ledger 1 and another archives the contract on Ledger 2.
Then the Participant Node P2 outputs the Create action as a
CreatedEvent, but not the Exercise in form of an
ArchiveEvent on the transaction service
because Ledger 2 can not notify P2 as P2 does not host Alice on Ledger 2.
Conversely, when one transaction creates a contract c2 with stakeholder Alice on Ledger 2 and another archives the contract on Ledger 1, then P2 outputs the
ArchivedEvent, but not the
To keep the transaction stream consistent, P2 additionally outputs a Leave c1 action on Alice’s transaction stream. This action signals that the Participant Node no longer outputs events concerning this contract; in particular not when the contract is archived. The contract is accordingly no longer reported in the active contract service and cannot be used by command submissions.
Conversely, P2 outputs an Enter c2 action some time before the
ArchivedEvent on the transaction stream.
This action signals that the Participant Node starts outputting events concerning this contract.
The contract is reported in the Active Contract Service and can be used by command submission.
The actions Enter and Leave are similar to a Create and a consuming Exercise action, respectively, except that Enter and Leave may occur several times for the same contract whereas there should be at most one Create action and at most one consuming Exercise action for each contract.
These Enter and Leave events are generated by the underlying interoperability protocol. This may happen as part of command submission or for other reasons, e.g., load balancing. It is guaranteed that the Enter action precedes contract usage, subject to the trust assumptions of the underlying ledgers and the interoperability protocol.
A contract may enter and leave the visibility of a Participant Node several times. For example, suppose that the painter submits the following commands and their commits end up on the given ledgers.
- Create a contract c with signatories Alice and the painter on Ledger 2
- Exercise a non-consuming choice ch1 on c on Ledger 1.
- Exercise a non-consuming choice ch2 on c on Ledger 2.
- Exercise a consuming choice ch3 on c on Ledger 1.
Then, the transaction tree stream that P2 provides for A contains five actions involving contract c: Enter, non-consuming Exercise, Leave, Enter, consuming Exercise. Importantly, P2 must not omit the Leave action and the subsequent Enter, even though they seem to cancel out. This is because their presence indicates that P2’s event stream for Alice may miss some events in between; in this example, exercising the choice ch2.
The flat transaction stream by P2 omits the non-consuming exercise choices. It nevertheless contains the three actions Enter, Leave, Enter before the consuming Exercise. This is because the Participant Node cannot know at the Leave action that there will be another Enter action coming.
In contrast, P1 need not output the Enter and Leave actions at all in this example because P1 hosts Alice on both ledgers.
With interoperability, a cross-ledger transaction can be committed on several interoperable Daml ledgers simultaneously. Such a cross-ledger transaction avoids some of the synchronization overhead of Enter and Leave actions. When a cross-ledger transaction uses contracts from several Daml ledgers, stakeholders may witness actions on their contracts that are actually not visible on the Participant Node.
For example, suppose that the split paint counteroffer workflow from the causality examples is committed as follows: The actions on CounterOffer and PaintAgree contracts are committed on Ledger 1. All actions on Ious are committed on Ledger 2, assuming that some Participant Node hosts the Bank on Ledger 2. The last transaction is a cross-ledger transaction because the archival of the CounterOffer and the creation of the PaintAgreement commits on Ledger 1 simultaneously with the transfer of Alice’s Iou to the painter on Ledger 2.
For the last transaction, Participant Node 1 notifies Alice of the transaction tree, the two archivals and the PaintAgree creation via the Transaction Service as usual. Participant Node 2 also output’s the whole transaction tree on Alice’s transaction tree stream, which contains the consuming Exercise of Alice’s Iou. However, it has not output the Create of Alice’s Iou because Iou actions commit on Ledger 2, on which Participant Node 2 does not host Alice. So Alice merely witnesses the archival even though she is an informee of the exercise. The Exercise action is therefore marked as merely being witnessed on Participant Node 2’s transaction tree stream.
In general, an action is marked as merely being witnessed when a party is an informee of the action, but the action is not committed on a ledger on which the Participant Node hosts the party. Unlike Enter and Leave, such witnessed actions do not affect causality from the participant’s point of view and therefore provide weaker ordering guarantees. Such witnessed actions show up neither in the flat transaction stream nor in the Active Contracts Service.
For example, suppose that the Create PaintAgree action commits on Ledger 2 instead of Ledger 1, i.e., only the CounterOffer actions commit on Ledger 1. Then, Participant Node 2 marks the Create PaintAgree action also as merely being witnessed on the transaction tree stream. Accordingly, it does not report the contract as active nor can Alice use the contract in her submissions via Participant Node 2.
Multi-ledger causality graphs¶
This section generalizes causality graphs to the interoperability setting.
Every active Daml contract resides on at most one Daml ledger. Any use of a contract must be committed on the Daml ledger where it resides. Initially, when the contract is created, it takes up residence on the Daml ledger on which the Create action is committed. To use contracts residing on different Daml ledgers, cross-ledger transactions are committed on several Daml ledgers.
However, cross-ledger transactions incur overheads and if a contract is frequently used on a Daml ledger that is not its residence, the interoperability protocol can migrate the contract to the other Daml ledger. The process of the contract giving up residence on the origin Daml ledger and taking up residence on the target Daml ledger is called a contract transfer. The Enter and Leave events on the transaction stream originate from such contract transfers, as will be explained below. Moreover, contract transfers are synchronization points between the origin and target Daml ledgers and therefore affect the ordering guarantees. We therefore generalize causality graphs for interoperability.
- Definition »Transfer action«
- A transfer action on a contract c is written Transfer c. The informees of the transfer actions are the stakeholders of c.
In the following, the term action refers to transaction actions (Create, Exercise, Fetch, and NoSuchKey) as well as transfer actions. In particular, a transfer action on a contract c is an action on c. Transfer actions do not appear in transactions though. So a transaction action cannot have a transfer action as a consequence and transfer actions do not have consequences at all.
- Definition »Multi-Ledger causality graph«
A multi-ledger causality graph G for a set Y of Daml ledgers is a finite, transitively closed, directed acyclic graph. The vertices are either transactions or transfer actions. Every action is possibly annotated with an incoming ledger and an outgoing ledger from Y according to the following table:
Action incoming ledger outgoing ledger Create no yes consuming Exercise yes no non-consuming Exercise yes yes Fetch yes yes NoSuchKey no no Transfer maybe maybe
For non-consuming Exercise and Fetch actions, the incoming ledger must be the same as the outgoing ledger. Transfer actions must have at least one of them. A transfer action with both set represents a complete transfer. If only the incoming ledger is set, it represents the partial information of an Enter event; if only outgoing is set, it is the partial information of a Leave event. Transfer actions with missing incoming or outgoing ledger annotations referred to as Enter or Leave actions, respectively.
The action order generalizes to multi-ledger causality graphs accordingly.
In the example for Enter and Leave events where the painter exercises three choices on contract c with signatories Alice and the painter, the four transactions yield the following multi-ledger causality graph. Incoming and outgoing ledgers are encoded as colors (green for Ledger 1 and yellow for Ledger 2). Transfer vertices are shown as circles, where the left half is colored with the incoming ledger and the right half with the outgoing ledger.
As for ordinary causality graphs, the diagrams for multi-ledger causality graphs omit transitive edges for readability.
As an example for a cross-domain transaction, consider the split paint counteroffer workflow with the cross-domain transaction. The corresponding multi-ledger causality graph is shown below. The last transaction tx4 is a cross-ledger transaction because its actions have more than one color.
- Definition »Ledger trace«
- A ledger trace is a finite list of pairs (ai, bi) such that bi - 1 = ai for all i > 0. Here ai and bi identify Daml ledgers or are the special value NONE, which is different from all Daml ledger identifiers.
- Definition »Multi-Ledger causal consistency for a contract«
Let G be a multi-ledger causality graph and X be a set of actions from G on a contract in c. The graph G is multi-ledger consistent for the contract c on X if all of the following hold:
- If X is not empty, then X contains a Create or Enter action. This action precedes all other actions in X.
- X contains at most one Create action. If so, this action precedes all other actions in X.
- If X contains a consuming Exercise action act, then act follows all other actions in X in G’s action order.
- All Transfer actions in X are ordered with all other actions in X.
- For every maximal chain in X (i.e., maximal totally ordered subset of X), the sequence of (incoming ledger, outgoing ledger) pairs is a ledger trace, using NONE if the action does not have an incoming or outgoing ledger annotation.
The first three conditions mimic the conditions of causal consistency for ordinary causality graphs. They ensure that Create actions come first and consuming Exercise actions last. An Enter action takes the role of a Create if there is no Create. The fourth condition ensures that all transfer actions are synchronization points for a contract. The last condition about ledger traces ensures that contracts reside on only one Daml ledger and all usages happen on the ledger of residence. In particular, the next contract action after a Leave must be an Enter.
For example, the above multi-ledger causality graph with transfer actions is multi-ledger consistent for c. In particular, there is only one maximal chain in the actions on c, namely
Create c -> tf1 -> ExeN B c ch1 -> tf2 -> ExeN B c ch2 -> tf3 -> ExeN B c ch3,
and for each edge act1 -> act2, the outgoing ledger color of act1 is the same as the incoming ledger color of act2. The restriction to maximal chains ensures that no node is skipped. For example, the (non-maximal) chain
Create c -> ExeN B c ch1 -> tf2 -> ExeN B c ch2 -> tf3 -> Exe B c ch3
is not a ledger trace because the outgoing ledger of the Create action (yellow) is not the same as the incoming ledger of the non-consuming Exercise action for ch1 (green). Accordingly, the subgraph without the tf1 vertex is not multi-ledger consistent for c even though it is a multi-ledger causality graph.
- Definition »Consistency for a multi-ledger causality graph«
- Let X be a subset of actions in a multi-ledger causality graph G. Then G is multi-ledger consistent for X (or X-multi-ledger consistent) if G is multi-ledger consistent for all contracts c on the set of actions on c in X. G is multi-ledger consistent if G is multi-ledger consistent on all the actions in G.
There is no multi-ledger consistency requirement for contract keys yet. So interoperability does not provide consistency guarantees beyond those that come from the contracts they reference. In particular, contract keys need not be unique and NoSuchKey actions do not check that the contract key is unassigned.
The multi-ledger causality graph for the split paint counteroffer workflow is multi-ledger consistent. In particular all maximal chains of actions on a contract are ledger traces:
|Iou Bank A||Create -> Fetch -> Exercise|
|ShowIou A P Bank||Create -> Exercise|
|Counteroffer A P Bank||Create -> Exercise|
|Iou Bank P||Create|
|PaintAgree P A||Create|
Minimality and reduction¶
When edges are added to an X-multi-ledger consistent causality graph such that it remains acyclic and transitively closed, the resulting graph is again X-multi-ledger consistent. The notions minimally consistent and reduction therefore generalize from ordinary causality graphs accordingly.
- Definition »Minimal multi-ledger-consistent causality graph«
- An X-multi-ledger consistent causality graph G is X-minimal if no strict subgraph of G (same vertices, fewer edges) is an X-multi-ledger consistent causality graph. If X is the set of all actions in G, then X is omitted.
- Definition »Reduction of a multi-ledger consistent causality graph«
- For an X-multi-ledger consistent causality graph G, there exists a unique minimal X-multi-ledger consistent causality graph reduceX(G) with the same vertices and the edges being a subset of G. reduceX(G) is called the X-reduction of G. As before, X is omitted if it contains all actions in G.
Since multi-ledger causality graphs are acyclic, their vertices can be sorted topologically and the resulting list is again a causality graph, where every vertex has an outgoing edge to all later vertices. If the original causality graph is X-consistent, then so is the topological sort, as topological sorting merely adds edges.
From multi-ledger causality graphs to ledgers¶
Multi-Ledger causality graphs G are linked to ledgers L in the Daml Ledger Model via topological sort and reduction.
- Given a multi-ledger causality graph G, drop the incoming and outgoing ledger annotations and all transfer vertices, topologically sort the transaction vertices, and extend the resulting list of transactions with the requesters to obtain a sequence of commits L.
- Given a sequence of commits L, use the transactions as vertices and add an edge from tx1 to tx2 whenever tx1’s commit precedes tx2’s commit in the sequence. Then add transfer vertices and incoming and outgoing ledger annotations as needed and connect them with edges to the transaction vertices.
This link preserves consistency only to some extent. Namely, if a multi-ledger causality graph is multi-ledger consistent for a contract c, then the corresponding ledger is consistent for the contract c, too. However, a multi-ledger-consistent causality graph does not yield a consistent ledger because key consistency may be violated. Conversely, a consistent ledger does not talk about the incoming and outgoing ledger annotations and therefore cannot enforce that the annotations are consistent.
A Participant Node maintains a local ledger for each party it hosts and the Transaction Service outputs a topological sort of this local ledger. When the Participant Node hosts the party on several ledgers, this local ledger is an multi-ledger causality graph. This section defines the ledger-aware projection of an multi-ledger causality graph, which yields such a local ledger.
- Definition »Y-labelled action«
- An action with incoming and outgoing ledger annotations is Y-labelled for a set Y if its incoming or outgoing ledger annotation is an element of Y.
- Definition »Ledger-aware projection for transactions«
- Let Y be a set of Daml ledgers and tx a transaction whose actions are annotated with incoming and outgoing ledgers. Let Act be the set of Y-labelled subactions of tx that the party P is an informee of. The ledger-aware projection of tx for P on Y (P-projection on Y) consists of all the maximal elements of Act (w.r.t. the subaction relation) in execution order.
Every action contains all its subactions. So if act is included in the P-projection on Y of tx, then all subactions of act are also part of the projection. Such a subaction act’ may not be Y-labelled itself though, i.e., belong to a different ledger. If P is an informee of act’, the Participant Node will mark act’ as merely being witnessed on P’s transaction stream, as explained below.
The cross-domain transaction in the split paint counteroffer workflow, for example, has the following projections for Alice and the painter on the Iou ledger (yellow) and the painting ledger (green). Here, the projections on the green ledger include the actions of the yellow ledger because a projection includes the subactions.
- Definition »Projection for transfer actions«
Let act be a transfer action annotated with an incoming ledger and/or an outgoing ledger. The projection of act on a set of ledgers Y removes the annotations from act that are not in Y. If the projection removes all annotations, it is empty.
The projection of act to a party P on Y (P-projection on Y) is the projection of act on Y if P is a stakeholder of the contract, and empty otherwise.
- Definition »Multi-Ledger consistency for a party«
- An multi-ledger causality graph G is consistent for a party P on a set of ledgers Y (P-consistent on Y) if G is multi-ledger consistent on the set of Y-labelled actions in G of which P is a stakeholder informee.
The notions of X-minimality and X-reduction extend to a party P on a set Y of ledgers accordingly.
- Definition »Ledger-aware projection for multi-ledger causality graphs«
Let G be a multi-ledger consistent causality graph and Y be a set of Daml ledgers. The projection of G to party P on Y (P-projection on Y) is the P-reduction on Y of the following causality graph G’, which is P-consistent on Y:
- The vertices of G’ are the vertices of G projected to P on Y, excluding empty projections.
- There is an edge between two vertices v1 and v2 in G’ if there is an edge from the G-vertex corresponding to v1 to the G-vertex corresponding to v2.
If G is a multi-ledger consistent causality graph, then the P-projection on Y is P-consistent on Y, too.
For example, the multi-ledger causality graph for the split paint counteroffer workflow is projected as follows.
The following points are worth highlighting:
- In Alice’s projection on the green ledger, Alice witnesses the archival of her Iou. As explained in the Ledger API ordering guarantees below, the Exercise action is marked as merely being witnessed in the transaction stream of a Participant Node that hosts Alice on the green ledger but not on the yellow ledger. Similarly, the Painter merely witnesses the Create of his Iou in the Painter’s projection on the green ledger.
- In the Painter’s projections, the ShowIou transaction tx3 is unordered w.r.t. to the CounterOffer acceptance in tx4 like in the case of ordinary causality graphs. The edge tx3 -> tx4 is removed by the reduction step during projection.
The projection of transfer actions can be illustrated with the Multi-Ledger causality graph with transfer actions. The A-projections on the yellow and green ledger look as follows. The white color indicates that a transfer action has no incoming or outgoing ledger annotation. That is, a Leave action is white on the right hand side and an Enter action is white on the left hand side.
Ledger API ordering guarantees¶
The Transaction Service and the Active Contract Service are derived from the local ledger that the Participant Node maintains for the party. Let Y be the set of ledgers on which the Participant Node hosts a party. The transaction tree stream outputs a topological sort of the party’s local ledger on Y, with the following modifications:
- Transfer actions with either an incoming or an outgoing ledger annotation are output as Enter and Leave events. Transfer actions with both incoming and outgoing ledger annotations are omitted.
- The incoming and outgoing ledger annotations are not output. Transaction actions with an incoming or outgoing ledger annotation that is not in Y are marked as merely being witnessed if the party is an informee of the action.
- Fetch nodes and NoSuchKey are omitted.
The flat transaction stream contains precisely the
ArchivedEvents, and the Enter and Leave actions that correspond to Create, consuming Exercise, Enter and Leave actions in transaction trees on the transaction tree stream where the party is a stakeholder of the affected contract and that are not marked as merely being witnessed.
Similarly, the active contract service provides the set of contracts that are active at the returned offset according to the flat transaction stream. That is, the contract state changes of all events from the transaction event stream are taken into account in the provided set of contracts.
The ordering guarantees for single Daml ledgers extend accordingly. In particular, interoperability ensures that all local ledgers are projections of a virtual shared multi-ledger causality graph that connects to the Daml Ledger Model as described above. The ledger validity guarantees therefore extend via the local ledgers to the Ledger API.