6 Parties and authority¶
DAML is designed for distributed applications involving mutually distrusting parties. In a well-constructed contract model, all parties have strong guarantees that nobody cheats or circumvents the rules laid out by templates and choices.
In this section you will learn about DAML’s authorization rules and how to develop contract models that give all parties the required guarantees. In particular, you’ll learn how to:
- Pass authority from one contract to another
- Write advanced choices
- Reason through DAML’s Authorization model
Preventing IOU revocation¶
The SimpleIou contract from 4 Transforming data using choices and 5 Adding constraints to a contract has one major problem: The contract is only signed by the issuer. The signatories are the parties with the power to create and archive contracts. If Alice gave Bob a SimpleIou for $100 in exchange for some goods, she could just archive it again after receiving the goods. Bob would have a record such actions, but would have to resort to off-ledger means to get his money back.
template SimpleIou
with
issuer : Party
owner : Party
cash : Cash
where
signatory issuer
simple_iou_test = scenario do
alice <- getParty "Alice"
bob <- getParty "Bob"
-- Alice and Bob enter into a trade.
-- Alice transfers the payment as a SimpleIou
iou <- submit alice do
create SimpleIou with
issuer = alice
owner = bob
cash = Cash with
amount = 100.0
currency = "USD"
pass (days 1)
-- Bob delivers the goods
pass (minutes 10)
-- Alice just deletes the payment again.
submit alice do
archive iou
For a party to have any guarantees that only those transformations specified in the choices are actually followed, they either need to be a signatory themselves, or trust one of the signatories to not agree to transactions that archive and re-create contracts in unexpected ways. To make the SimpleIou safe for Bob, you need to add him as a signatory.
template Iou
with
issuer : Party
owner : Party
cash : Cash
where
signatory issuer, owner
controller owner can
Transfer
: ContractId Iou
with
newOwner : Party
do
assertMsg "newOwner cannot be equal to owner." (owner /= newOwner)
create this with
owner = newOwner
There’s a new problem here: There is no way for Alice to issue or transfer this Iou to Bob. To get an Iou with Bob’s signature as owner onto the ledger, his authority is needed.
iou_test = scenario do
alice <- getParty "Alice"
bob <- getParty "Bob"
-- Alice and Bob enter into a trade.
-- Alice wants to give Bob an Iou, but she can't without Bobs authority
submitMustFail alice do
create Iou with
issuer = alice
owner = bob
cash = Cash with
amount = 100.0
currency = "USD"
-- She can issue herself an Iou
iou <- submit alice do
create Iou with
issuer = alice
owner = alice
cash = Cash with
amount = 100.0
currency = "USD"
-- But can't transfer it to Bob
submitMustFail alice do
exercise iou Transfer with
newOwner = bob
This may seem awkward, but notice that the ensure clause is gone from the Iou again. The above Iou can contain negative values so Bob should be glad that Alice cannot put his signature on any Iou.
You’ll now learn a couple of common ways of buildng issuance and transfer workflows for the above Iou, before diving into the authorization model in full.
Use propose-accept workflows for one-off authorization¶
If there is no standing relationship between Alice and Bob, Alice can propose the issuance of an Iou to Bob, giving him the choice to accept. You can do so by introducing a proposal contract IouProposal:
template IouProposal
with
iou : Iou
where
signatory iou.issuer
controller iou.owner can
IouProposal_Accept
: ContractId Iou
do
create iou
Note how we have used the fact that templates are records here to store the Iou in a single field.
iouProposal <- submit alice do
create IouProposal with
iou = Iou with
issuer = alice
owner = bob
cash = Cash with
amount = 100.0
currency = "USD"
submit bob do
exercise iouProposal IouProposal_Accept
The IouProposal contract carries the authorithy of iou.issuer by virtue of them being a signatory. By exercising the IouProposal_Accept choice, Bob adds his authority to that of Alice, which is why an Iou with both signatories can be created in the context of that choice.
The choice is called IouProposal_Accept, not Accept, because propose-accept patterns are very common. In fact, you’ll see another one just below. As each choice defines a record type, you cannot have two choices of the same name in scope. It’s a good idea to qualify choice names to ensure uniqueness.
The above solves issuance, but not transfers. You can solve transfers exactly the same way, though, by creating a TransferProposal:
template IouTransferProposal
with
iou : Iou
newOwner : Party
where
signatory (signatory iou)
controller iou.owner can
IouTransferProposal_Cancel
: ContractId Iou
do
create iou
controller newOwner can
IouTransferProposal_Reject
: ContractId Iou
do
create iou
IouTransferProposal_Accept
: ContractId Iou
do
create iou with
owner = newOwner
In addition to defining the signatories of a contract, signatory can also be used to extract the signatories from another contract. Instead of writing signatory (signatory iou), you could write signatory iou.issuer, iou.owner.
Note also how newOwner is given multiple choices using a single controller newOwner can block. The IouProposal had a single signatory so it could be cancelled easily by archiving it. Without a Cancel choice, the newOwner could abuse an open TransferProposal as an option. The triple Accept, Reject, Cancel is common to most proposal templates.
To allow an iou.owner to create such a proposal, you need to give them the choice to propose a transfer on the Iou contract. The choice looks just like the above Transfer choice, except that a IouTransferProposal is created instead of an Iou:
ProposeTransfer
: ContractId IouTransferProposal
with
newOwner : Party
do
assertMsg "newOwner cannot be equal to owner." (owner /= newOwner)
create IouTransferProposal with
iou = this
newOwner
Bob can now transfer his Iou. The transfer workflow can even be used for issuance:
charlie <- getParty "Charlie"
-- Alice issues an iou using a transfer proposal
tpab <- submit alice do
create IouTransferProposal with
newOwner = bob
iou = Iou with
issuer = alice
owner = alice
cash = Cash with
amount = 100.0
currency = "USD"
-- Bob accepts
iou2 <- submit bob do
exercise tpab IouTransferProposal_Accept
-- Bob offers charlie a transfer
tpbc <- submit bob do
exercise iou2 ProposeTransfer with
newOwner = charlie
-- Charlie accepts
submit charlie do
exercise tpbc IouTransferProposal_Accept
Use role contracts for ongoing authorization¶
Many actions, like the issuance of assets or their transfer, can be pre-agreed. You can represent this succinctly in DAML through relationship or role contracts.
Jointly, an owner and newOwner can transfer an asset, as demonstrated in the scenrario above. In 7 Composing choices, you will see how to compose the ProposeTransfer and IouTransferProposal_Accept choices into a single new choice, but for now, here is a different way. You can give them the joint right to transfer an IOU:
choice Mutual_Transfer
: ContractId Iou
with
newOwner : Party
controller owner, newOwner
do
create this with
owner = newOwner
Up to now, the controllers of choices were known from the current contract. Here, the newOwner variable is part of the choice arguments, not the Iou.
The above syntax is an alternative to controller c can, which allows for this. Such choices live outside any controller c can block. They declared using the choice keyword, and have an extra clause controller c, which takes the place of controller c can, and has access to to the choice arguments.
This is also the first time we have shown a choice with more than one controller. If multiple controllers are specified, the authority of all the controllers is needed. Here, neither owner, nor newOwner can execute a transfer unilaterally, hence the name Mutual_Transfer.
template IouSender
with
sender : Party
receiver : Party
where
signatory receiver
controller sender can
nonconsuming Send_Iou
: ContractId Iou
with
iouCid : ContractId Iou
do
iou <- fetch iouCid
assert (iou.cash.amount > 0.0)
assert (sender == iou.owner)
exercise iouCid Mutual_Transfer with
newOwner = receiver
The above IouSender contract now gives a one party, the sender the right to send Iou contracts with positive amounts to a receiver. The nonconsuming keyword on the choice Send_Iou changes the behaviour of the choice so that the contract it’s exercised on does not get archived when the choice is exercised. That way the sender can use the contract to send multiple Ious.
Here it is in action:
-- Bob allows Alice to send him Ious
sab <- submit bob do
create IouSender with
sender = alice
receiver = bob
-- Charlie allows Bob to send him Ious
sbc <- submit charlie do
create IouSender with
sender = bob
receiver = charlie
-- Alice can now send the iou she issued herself earlier
iou4 <- submit alice do
exercise sab Send_Iou with
iouCid = iou
-- Bob sends it on to charlie
submit bob do
exercise sbc Send_Iou with
iouCid = iou4
DAML’s authorization model¶
Hopefully, the above will have given you a good intuition for how authority is passed around in DAML. In this section you’ll learn about the formal authorization model to allow you to reason through your contract models. This will allow you to construct them in such a way that you don’t run into authorization errors at runtime, or, worse still, allow malicious transactions.
In Choices in the Ledger Model you learned that a transaction is, equivalently, a tree of transactions, or a forest of actions, where each transaction is a list of actions, and each action has a child-transaction called its consequences.
Each action has a set of required authorizers – the parties that must authorize that action – and each transaction has a set of authorizers – the parties that did actually authorize the transaction.
The authorization rule is that the required authorizers of every action are a subset of the authorizers of the parent transaction.
The required authorizers of actions are:
- The required authorizers of an exercise action are the controllers on the corresponding choice. Remember that
Archiveandarchiveare just an implicit choice with the signatories as controllers. - The required authorizers of a create action are the signatories of the contract.
- The required authorizers of a fetch action (which also includes
fetchByKey) are somewhat dynamic and covered later.
The authorizers of transactions are:
- The root transaction of a commit is authorized by the submitting party.
- The consequences of an exercise action are authorized by the actors of that action plus the signatories of the contract on which the action was taken.
An authorization example¶
The final transaction in the scenario of the the source file for this section is authorized as follows, ignoring fetches:
- Bob submits the transaction so he’s the authorizer on the root transaction.
- The root transaction has a single action, which is to exercise
Send_Iouon aIouSendercontract with Bob assenderand Charlie asreceiver. Since the controller of that choice is thesender, Bob is the required authorizer. - The consequences of the
Send_Iouaction are authorized by its actors, Bob, as well as signatories of the contract on which the action was taken. That’s Charlie in this case, so the consequences are authorized by both Bob and Charlie. - The consequences contain a single action, which is a
Mutual_Exercisewith Charlie asnewOwneron anIouwithissueralice andownerBob. The required authorizers of the action are theowner, Bob, and thenewOwner, Charlie, which matches the parent’s authorizers. - The consequences of
Mutual_Transferare authorized by the actors (Bob and Charlie), as well as the signatories on the Iou (Alice and Bob). - The single action on the consequences, the creation of an Iou with
issuerAlice andownerCharlie has required authorizers Alice and Charlie, which is a proper subset of the parent’s authorizers.
You can see the graph of this transaction in the transaction view of the IDE:
TX #12 1970-01-01T00:00:00Z (Parties:269:3)
#12:0
│ known to (since): 'Bob' (#12), 'Charlie' (#12)
└─> 'Bob' exercises Send_Iou on #10:0 (Parties:IouSender)
with
iouCid = #11:3
children:
#12:1
│ known to (since): 'Bob' (#12), 'Charlie' (#12)
└─> fetch #11:3 (Parties:Iou)
#12:2
│ known to (since): 'Bob' (#12), 'Alice' (#12), 'Charlie' (#12)
└─> 'Bob', 'Charlie' exercises Mutual_Transfer on #11:3 (Parties:Iou)
with
newOwner = 'Charlie'
children:
#12:3
│ known to (since): 'Charlie' (#12), 'Alice' (#12), 'Bob' (#12)
└─> create Parties:Iou
with
issuer = 'Alice';
owner = 'Charlie';
cash =
(Parties:Cash with
currency = "USD"; amount = 100.0)
Note that authority is not automatically transferred transitively.
template NonTransitive
with
partyA : Party
partyB : Party
where
signatory partyA
controller partyA can
TryA
: ContractId NonTransitive
do
create NonTransitive with
partyA = partyB
partyB = partyA
controller partyB can
TryB
: ContractId NonTransitive
with
other : ContractId NonTransitive
do
exercise other TryA
nt1 <- submit alice do
create NonTransitive with
partyA = alice
partyB = bob
nt2 <- submit alice do
create NonTransitive with
partyA = alice
partyB = bob
submitMustFail bob do
exercise nt1 TryB with
other = nt2
The consequences of TryB are authorized by both Alice and Bob, but the action TryA only has Alice as an actor and Alice is the only signatory on the contract.
Therefore, the consequences of TryA are only authorized by Alice. Bob’s authority is now missing to create the flipped NonTransitive so the transaction fails.
Next up¶
In 7 Composing choices you will finally put everything you have learned together to build a simple asset holding and trading model akin to that in the Quickstart guide. In that context you’ll learn a bit more about the Update action and how to use it to compose transactions, as well as about privacy on DAML ledgers.