Ledger API Reference

com/daml/ledger/api/v1/active_contracts_service.proto

GetActiveContractsRequest

Field	Type	Label	Description
ledger_id	string		Must correspond to the ledger ID reported by the Ledger Identification Service. Must be a valid LedgerString (as described in value.proto). Optional
filter	TransactionFilter		Templates to include in the served snapshot, per party. Required
verbose	bool		If enabled, values served over the API will contain more information than strictly necessary to interpret the data. In particular, setting the verbose flag to true triggers the ledger to include labels for record fields. Optional
active_at_offset	string		The offset at which the snapshot of the active contracts will be computed. Must be no greater than the current ledger end offset. Must be greater than or equal to the last pruning offset. If not set the current ledger end offset will be used. Optional

GetActiveContractsResponse

Field	Type	Label	Description
offset	string		Included only in the last message. The client should start consuming the transactions endpoint with this offset. The format of this field is described in ledger_offset.proto.
workflow_id	string		The workflow that created the contracts. Must be a valid LedgerString (as described in value.proto).
active_contracts	CreatedEvent	repeated	The list of contracts that were introduced by the workflow with workflow_id at the offset. Must be a valid LedgerString (as described in value.proto).

ActiveContractsService

Allows clients to initialize themselves according to a fairly recent state of the ledger without reading through all transactions that were committed since the ledger’s creation. In V2 Ledger API this service is not available anymore. Use v2.StateService instead.

Method name	Request type	Response type	Description
GetActiveContracts	GetActiveContractsRequest	GetActiveContractsResponse	Returns a stream of the snapshot of the active contracts at a ledger offset. If there are no active contracts, the stream returns a single response message with the offset at which the snapshot has been taken. Clients SHOULD use the offset in the last GetActiveContractsResponse message to continue streaming transactions with the transaction service. Clients SHOULD NOT assume that the set of active contracts they receive reflects the state at the ledger end.

com/daml/ledger/api/v1/admin/config_management_service.proto

GetTimeModelRequest

GetTimeModelResponse

Field	Type	Label	Description
configuration_generation	int64		The current configuration generation. The generation is a monotonically increasing integer that is incremented on each change. Used when setting the time model.
time_model	TimeModel		The current ledger time model.

SetTimeModelRequest

Field	Type	Label	Description
submission_id	string		Submission identifier used for tracking the request and to reject duplicate submissions. Required.
maximum_record_time	google.protobuf.Timestamp		Deadline for the configuration change after which the change is rejected.
configuration_generation	int64		The current configuration generation which we’re submitting the change against. This is used to perform a compare-and-swap of the configuration to safeguard against concurrent modifications. Required.
new_time_model	TimeModel		The new time model that replaces the current one. Required.

SetTimeModelResponse

Field	Type	Label	Description
configuration_generation	int64		The configuration generation of the committed time model.

TimeModel

Field	Type	Label	Description
avg_transaction_latency	google.protobuf.Duration		The expected average latency of a transaction, i.e., the average time from submitting the transaction to a [[WriteService]] and the transaction being assigned a record time. Required.
min_skew	google.protobuf.Duration		The minimimum skew between ledger time and record time: lt_TX >= rt_TX - minSkew Required.
max_skew	google.protobuf.Duration		The maximum skew between ledger time and record time: lt_TX <= rt_TX + maxSkew Required.

ConfigManagementService

Status: experimental interface, will change before it is deemed production ready

The ledger configuration management service provides methods for the ledger administrator to change the current ledger configuration. The services provides methods to modify different aspects of the configuration. In V2 Ledger API this service is not available anymore.

Method name	Request type	Response type	Description
GetTimeModel	GetTimeModelRequest	GetTimeModelResponse	Return the currently active time model and the current configuration generation.
SetTimeModel	SetTimeModelRequest	SetTimeModelResponse	Set the ledger time model.

com/daml/ledger/api/v1/admin/identity_provider_config_service.proto

CreateIdentityProviderConfigRequest

Field	Type	Label	Description
identity_provider_config	IdentityProviderConfig		Required

CreateIdentityProviderConfigResponse

Field	Type	Label	Description
identity_provider_config	IdentityProviderConfig

DeleteIdentityProviderConfigRequest

Field	Type	Label	Description
identity_provider_id	string		The identity provider config to delete. Required

DeleteIdentityProviderConfigResponse

Does not (yet) contain any data.

GetIdentityProviderConfigRequest

Field	Type	Label	Description
identity_provider_id	string		Required

GetIdentityProviderConfigResponse

Field	Type	Label	Description
identity_provider_config	IdentityProviderConfig

IdentityProviderConfig

Field	Type	Label	Description
identity_provider_id	string		The identity provider identifier Must be a valid LedgerString (as describe in value.proto). Required
is_deactivated	bool		When set, the callers using JWT tokens issued by this identity provider are denied all access to the Ledger API. Optional, Modifiable
issuer	string		Specifies the issuer of the JWT token. The issuer value is a case sensitive URL using the https scheme that contains scheme, host, and optionally, port number and path components and no query or fragment components. Required Modifiable
jwks_url	string		The JWKS (JSON Web Key Set) URL. The Ledger API uses JWKs (JSON Web Keys) from the provided URL to verify that the JWT has been signed with the loaded JWK. Only RS256 (RSA Signature with SHA-256) signing algorithm is supported. Required Modifiable
audience	string		Specifies the audience of the JWT token. When set, the callers using JWT tokens issued by this identity provider are allowed to get an access only if the “aud” claim includes the string specified here Optional, Modifiable

ListIdentityProviderConfigsRequest

Pagination is not required as the resulting data set is small enough to be returned in a single call

ListIdentityProviderConfigsResponse

Field	Type	Label	Description
identity_provider_configs	IdentityProviderConfig	repeated

UpdateIdentityProviderConfigRequest

Field	Type	Label	Description
identity_provider_config	IdentityProviderConfig		The identity provider config to update. Required, Modifiable
update_mask	google.protobuf.FieldMask		An update mask specifies how and which properties of the IdentityProviderConfig message are to be updated. An update mask consists of a set of update paths. A valid update path points to a field or a subfield relative to the IdentityProviderConfig message. A valid update mask must: (1) contain at least one update path, (2) contain only valid update paths. Fields that can be updated are marked as Modifiable. For additional information see the documentation for standard protobuf3’s google.protobuf.FieldMask. Required

UpdateIdentityProviderConfigResponse

Field	Type	Label	Description
identity_provider_config	IdentityProviderConfig		Updated identity provider config

IdentityProviderConfigService

Identity Provider Config Service makes it possible for participant node administrators to setup and manage additional identity providers at runtime.

This allows using access tokens from identity providers unknown at deployment time. When an identity provider is configured, independent IDP administrators can manage their own set of parties and users. Such parties and users have a matching identity_provider_id defined and are inaccessible to administrators from other identity providers. A user will only be authenticated if the corresponding JWT token is issued by the appropriate identity provider. Users and parties without identity_provider_id defined are assumed to be using the default identity provider, which is configured statically at the participant node’s deployment time.

The Ledger API uses the “iss” claim of a JWT token to match the token to a specific IDP. If there is no match, the default IDP is assumed.

The fields of request messages (and sub-messages) are marked either as Optional or Required: (1) Optional denoting the client may leave the field unset when sending a request. (2) Required denoting the client must set the field to a non-default value when sending a request.

An identity provider config resource is described by the IdentityProviderConfig message, An identity provider config resource, once it has been created, can be modified. In order to update the properties represented by the IdentityProviderConfig message use the UpdateIdentityProviderConfig RPC. The only fields that can be modified are those marked as Modifiable.

Method name	Request type	Response type	Description
CreateIdentityProviderConfig	CreateIdentityProviderConfigRequest	CreateIdentityProviderConfigResponse	Create a new identity provider configuration. The request will fail if the maximum allowed number of separate configurations is reached.
GetIdentityProviderConfig	GetIdentityProviderConfigRequest	GetIdentityProviderConfigResponse	Get the identity provider configuration data by id.
UpdateIdentityProviderConfig	UpdateIdentityProviderConfigRequest	UpdateIdentityProviderConfigResponse	Update selected modifiable attribute of an identity provider config resource described by the IdentityProviderConfig message.
ListIdentityProviderConfigs	ListIdentityProviderConfigsRequest	ListIdentityProviderConfigsResponse	List all existing identity provider configurations.
DeleteIdentityProviderConfig	DeleteIdentityProviderConfigRequest	DeleteIdentityProviderConfigResponse	Delete an existing identity provider configuration.

com/daml/ledger/api/v1/admin/metering_report_service.proto

GetMeteringReportRequest

Authorized if and only if the authenticated user is a participant admin.

Field	Type	Label	Description
from	google.protobuf.Timestamp		The from timestamp (inclusive). Required.
to	google.protobuf.Timestamp		The to timestamp (exclusive). If not provided, the server will default to its current time.
application_id	string		If set to a non-empty value, then the report will only be generated for that application. Optional.

GetMeteringReportResponse

Field	Type	Label	Description
request	GetMeteringReportRequest		The actual request that was executed.
report_generation_time	google.protobuf.Timestamp		The time at which the report was computed.
metering_report_json	google.protobuf.Struct		The metering report json. For a JSON Schema definition of the JSon see: https://github.com/digital-asset/daml/blob/main/ledger-api/grpc-definitions/metering-report-schema.json

MeteringReportService

Experimental API to retrieve metering reports.

Metering reports aim to provide the information necessary for billing participant and application operators.

Method name	Request type	Response type	Description
GetMeteringReport	GetMeteringReportRequest	GetMeteringReportResponse	Retrieve a metering report.

com/daml/ledger/api/v1/admin/object_meta.proto

ObjectMeta

Represents metadata corresponding to a participant resource (e.g. a participant user or participant local information about a party).

Based on ObjectMeta meta used in Kubernetes API. See https://github.com/kubernetes/apimachinery/blob/master/pkg/apis/meta/v1/generated.proto#L640

Field	Type	Label	Description
resource_version	string		An opaque, non-empty value, populated by a participant server which represents the internal version of the resource this ObjectMeta message is attached to. The participant server will change it to a unique value each time the corresponding resource is updated. You must not rely on the format of resource version. The participant server might change it without notice. You can obtain the newest resource version value by issuing a read request. You may use it for concurrent change detection by passing it back unmodified in an update request. The participant server will then compare the passed value with the value maintained by the system to determine if any other updates took place since you had read the resource version. Upon a successful update you are guaranteed that no other update took place during your read-modify-write sequence. However, if another update took place during your read-modify-write sequence then your update will fail with an appropriate error. Concurrent change control is optional. It will be applied only if you include a resource version in an update request. When creating a new instance of a resource you must leave the resource version empty. Its value will be populated by the participant server upon successful resource creation. Optional
annotations	ObjectMeta.AnnotationsEntry	repeated	A set of modifiable key-value pairs that can be used to represent arbitrary, client-specific metadata. Constraints: 1. The total size over all keys and values cannot exceed 256kb in UTF-8 encoding. 2. Keys are composed of an optional prefix segment and a required name segment such that: - key prefix, when present, must be a valid DNS subdomain with at most 253 characters, followed by a ‘/’ (forward slash) character, - name segment must have at most 63 characters that are either alphanumeric ([a-z0-9A-Z]), or a ‘.’ (dot), ‘-’ (dash) or ‘_’ (underscore); and it must start and end with an alphanumeric character. 2. Values can be any non-empty strings. Keys with empty prefix are reserved for end-users. Properties set by external tools or internally by the participant server must use non-empty key prefixes. Duplicate keys are disallowed by the semantics of the protobuf3 maps. See: https://developers.google.com/protocol-buffers/docs/proto3#maps Annotations may be a part of a modifiable resource. Use the resource’s update RPC to update its annotations. In order to add a new annotation or update an existing one using an update RPC, provide the desired annotation in the update request. In order to remove an annotation using an update RPC, provide the target annotation’s key but set its value to the empty string in the update request. Optional Modifiable

ObjectMeta.AnnotationsEntry

Field	Type	Label	Description
key	string
value	string

com/daml/ledger/api/v1/admin/package_management_service.proto

ListKnownPackagesRequest

ListKnownPackagesResponse

Field	Type	Label	Description
package_details	PackageDetails	repeated	The details of all Daml-LF packages known to backing participant. Required

PackageDetails

Field	Type	Label	Description
package_id	string		The identity of the Daml-LF package. Must be a valid PackageIdString (as describe in value.proto). Required
package_size	uint64		Size of the package in bytes. The size of the package is given by the size of the daml_lf ArchivePayload. See further details in daml_lf.proto. Required
known_since	google.protobuf.Timestamp		Indicates since when the package is known to the backing participant. Required
source_description	string		Description provided by the backing participant describing where it got the package from. Optional

UploadDarFileRequest

Field	Type	Label	Description
dar_file	bytes		Contains a Daml archive DAR file, which in turn is a jar like zipped container for daml_lf archives. See further details in daml_lf.proto. Required
submission_id	string		Unique submission identifier. Optional, defaults to a random identifier.

UploadDarFileResponse

An empty message that is received when the upload operation succeeded.

PackageManagementService

Status: experimental interface, will change before it is deemed production ready

Query the Daml-LF packages supported by the ledger participant and upload DAR files. We use ‘backing participant’ to refer to this specific participant in the methods of this API.

Method name	Request type	Response type	Description
ListKnownPackages	ListKnownPackagesRequest	ListKnownPackagesResponse	Returns the details of all Daml-LF packages known to the backing participant.
UploadDarFile	UploadDarFileRequest	UploadDarFileResponse	Upload a DAR file to the backing participant. Depending on the ledger implementation this might also make the package available on the whole ledger. This call might not be supported by some ledger implementations. Canton could be an example, where uploading a DAR is not sufficient to render it usable, it must be activated first. This call may: - Succeed, if the package was successfully uploaded, or if the same package was already uploaded before. - Respond with a gRPC error

com/daml/ledger/api/v1/admin/participant_pruning_service.proto

PruneRequest

Field	Type	Label	Description
prune_up_to	string		Inclusive offset up to which the ledger is to be pruned. By default the following data is pruned: 1. All normal and divulged contracts that have been archived before prune_up_to. 2. All transaction events and completions before prune_up_to
submission_id	string		Unique submission identifier. Optional, defaults to a random identifier, used for logging.
prune_all_divulged_contracts	bool		Prune all immediately and retroactively divulged contracts created before prune_up_to independent of whether they were archived before prune_up_to. Useful to avoid leaking storage on participant nodes that can see a divulged contract but not its archival.

Application developers SHOULD write their Daml applications such that they do not rely on divulged contracts; i.e., no warnings from using divulged contracts as inputs to transactions are emitted.

Participant node operators SHOULD set the prune_all_divulged_contracts flag to avoid leaking storage due to accumulating unarchived divulged contracts PROVIDED that: 1. no application using this participant node relies on divulgence OR 2. divulged contracts on which applications rely have been re-divulged after the prune_up_to offset.

PruneResponse

Empty for now, but may contain fields in the future

ParticipantPruningService

Prunes/truncates the “oldest” transactions from the participant (the participant Ledger Api Server plus any other participant-local state) by removing a portion of the ledger in such a way that the set of future, allowed commands are not affected.

This enables: 1. keeping the “inactive” portion of the ledger to a manageable size and 2. removing inactive state to honor the right to be forgotten.

Method name	Request type	Response type	Description
Prune	PruneRequest	PruneResponse	Prune the ledger specifying the offset before and at which ledger transactions should be removed. Only returns when the potentially long-running prune request ends successfully or with an error.

com/daml/ledger/api/v1/admin/party_management_service.proto

AllocatePartyRequest

Required authorization: HasRight(ParticipantAdmin) OR IsAuthenticatedIdentityProviderAdmin(identity_provider_id)

Field	Type	Label	Description
party_id_hint	string		A hint to the participant which party ID to allocate. It can be ignored. Must be a valid PartyIdString (as described in value.proto). Optional
display_name	string		Human-readable name of the party to be added to the participant. It doesn’t have to be unique. Use of this field is discouraged. Use local_metadata instead. Optional
local_metadata	ObjectMeta		Participant-local metadata to be stored in the PartyDetails of this newly allocated party. Optional
identity_provider_id	string		The id of the Identity Provider Optional, if not set, assume the party is managed by the default identity provider or party is not hosted by the participant.

AllocatePartyResponse

Field	Type	Label	Description
party_details	PartyDetails

GetParticipantIdRequest

Required authorization: HasRight(ParticipantAdmin)

GetParticipantIdResponse

Field	Type	Label	Description
participant_id	string		Identifier of the participant, which SHOULD be globally unique. Must be a valid LedgerString (as describe in value.proto).

GetPartiesRequest

Required authorization: HasRight(ParticipantAdmin) OR IsAuthenticatedIdentityProviderAdmin(identity_provider_id)

Field	Type	Label	Description
parties	string	repeated	The stable, unique identifier of the Daml parties. Must be valid PartyIdStrings (as described in value.proto). Required
identity_provider_id	string		The id of the Identity Provider whose parties should be retrieved. Optional, if not set, assume the party is managed by the default identity provider or party is not hosted by the participant.

GetPartiesResponse

Field	Type	Label	Description
party_details	PartyDetails	repeated	The details of the requested Daml parties by the participant, if known. The party details may not be in the same order as requested. Required

ListKnownPartiesRequest

Required authorization: HasRight(ParticipantAdmin) OR IsAuthenticatedIdentityProviderAdmin(identity_provider_id)

Field	Type	Label	Description
identity_provider_id	string		The id of the Identity Provider whose parties should be retrieved. Optional, if not set, assume the party is managed by the default identity provider or party is not hosted by the participant.

ListKnownPartiesResponse

Field	Type	Label	Description
party_details	PartyDetails	repeated	The details of all Daml parties known by the participant. Required

PartyDetails

Field	Type	Label	Description
party	string		The stable unique identifier of a Daml party. Must be a valid PartyIdString (as described in value.proto). Required
display_name	string		Human readable name associated with the party at allocation time. Caution, it might not be unique. Use of this field is discouraged. Use the local_metadata field instead. Optional
is_local	bool		true if party is hosted by the participant and the party shares the same identity provider as the user issuing the request. Optional
local_metadata	ObjectMeta		Participant-local metadata of this party. Optional, Modifiable
identity_provider_id	string		The id of the Identity Provider Optional, if not set, there could be 3 options: 1) the party is managed by the default identity provider. 2) party is not hosted by the participant. 3) party is hosted by the participant, but is outside of the user’s identity provider.

UpdatePartyDetailsRequest

Required authorization: HasRight(ParticipantAdmin) OR IsAuthenticatedIdentityProviderAdmin(party_details.identity_provider_id)

Field	Type	Label	Description
party_details	PartyDetails		Party to be updated Required, Modifiable
update_mask	google.protobuf.FieldMask		An update mask specifies how and which properties of the PartyDetails message are to be updated. An update mask consists of a set of update paths. A valid update path points to a field or a subfield relative to the PartyDetails message. A valid update mask must: (1) contain at least one update path, (2) contain only valid update paths. Fields that can be updated are marked as Modifiable. An update path can also point to non-Modifiable fields such as ‘party’ and ‘local_metadata.resource_version’ because they are used: (1) to identify the party details resource subject to the update, (2) for concurrent change control. An update path can also point to non-Modifiable fields such as ‘is_local’ and ‘display_name’ as long as the values provided in the update request match the server values. Examples of update paths: ‘local_metadata.annotations’, ‘local_metadata’. For additional information see the documentation for standard protobuf3’s google.protobuf.FieldMask. For similar Ledger API see com.daml.ledger.api.v1.admin.UpdateUserRequest. Required

UpdatePartyDetailsResponse

Field	Type	Label	Description
party_details	PartyDetails		Updated party details

UpdatePartyIdentityProviderRequest

Required authorization: HasRight(ParticipantAdmin)

Field	Type	Label	Description
party	string		Party to update
source_identity_provider_id	string		Current identity provider id of the party
target_identity_provider_id	string		Target identity provider id of the party

UpdatePartyIdentityProviderResponse

PartyManagementService

This service allows inspecting the party management state of the ledger known to the participant and managing the participant-local party metadata.

The authorization rules for its RPCs are specified on the <RpcName>Request messages as boolean expressions over these facts: (1) HasRight(r) denoting whether the authenticated user has right r and (2) IsAuthenticatedIdentityProviderAdmin(idp) denoting whether idp is equal to the identity_provider_id of the authenticated user and the user has an IdentityProviderAdmin right. If identity_provider_id is set to an empty string, then it’s effectively set to the value of access token’s ‘iss’ field if that is provided. If identity_provider_id remains an empty string, the default identity provider will be assumed.

The fields of request messages (and sub-messages) are marked either as Optional or Required: (1) Optional denoting the client may leave the field unset when sending a request. (2) Required denoting the client must set the field to a non-default value when sending a request.

A party details resource is described by the PartyDetails message, A party details resource, once it has been created, can be modified using the UpdatePartyDetails RPC. The only fields that can be modified are those marked as Modifiable.

Method name	Request type	Response type	Description
GetParticipantId	GetParticipantIdRequest	GetParticipantIdResponse	Return the identifier of the participant. All horizontally scaled replicas should return the same id. daml-on-kv-ledger: returns an identifier supplied on command line at launch time canton: returns globally unique identifier of the participant
GetParties	GetPartiesRequest	GetPartiesResponse	Get the party details of the given parties. Only known parties will be returned in the list.
ListKnownParties	ListKnownPartiesRequest	ListKnownPartiesResponse	List the parties known by the participant. The list returned contains parties whose ledger access is facilitated by the participant and the ones maintained elsewhere.
AllocateParty	AllocatePartyRequest	AllocatePartyResponse	Allocates a new party on a ledger and adds it to the set managed by the participant. Caller specifies a party identifier suggestion, the actual identifier allocated might be different and is implementation specific. Caller can specify party metadata that is stored locally on the participant. This call may: - Succeed, in which case the actual allocated identifier is visible in the response. - Respond with a gRPC error daml-on-kv-ledger: suggestion’s uniqueness is checked by the validators in the consensus layer and call rejected if the identifier is already present. canton: completely different globally unique identifier is allocated. Behind the scenes calls to an internal protocol are made. As that protocol is richer than the surface protocol, the arguments take implicit values The party identifier suggestion must be a valid party name. Party names are required to be non-empty US-ASCII strings built from letters, digits, space, colon, minus and underscore limited to 255 chars
UpdatePartyDetails	UpdatePartyDetailsRequest	UpdatePartyDetailsResponse	Update selected modifiable participant-local attributes of a party details resource. Can update the participant’s local information for local parties.
UpdatePartyIdentityProviderId	UpdatePartyIdentityProviderRequest	UpdatePartyIdentityProviderResponse	Update the assignment of a party from one IDP to another.

com/daml/ledger/api/v1/admin/user_management_service.proto

CreateUserRequest

Required authorization: HasRight(ParticipantAdmin) OR IsAuthenticatedIdentityProviderAdmin(user.identity_provider_id)

Field	Type	Label	Description
user	User		The user to create. Required
rights	Right	repeated	The rights to be assigned to the user upon creation, which SHOULD include appropriate rights for the user.primary_party. Optional

CreateUserResponse

Field	Type	Label	Description
user	User		Created user.

DeleteUserRequest

Required authorization: HasRight(ParticipantAdmin) OR IsAuthenticatedIdentityProviderAdmin(identity_provider_id)

Field	Type	Label	Description
user_id	string		The user to delete. Required
identity_provider_id	string		The id of the Identity Provider Optional, if not set, assume the user is managed by the default identity provider.

DeleteUserResponse

Does not (yet) contain any data.

GetUserRequest

Required authorization: HasRight(ParticipantAdmin) OR IsAuthenticatedIdentityProviderAdmin(identity_provider_id) OR IsAuthenticatedUser(user_id)

Field	Type	Label	Description
user_id	string		The user whose data to retrieve. If set to empty string (the default), then the data for the authenticated user will be retrieved. Optional
identity_provider_id	string		The id of the Identity Provider Optional, if not set, assume the user is managed by the default identity provider.

GetUserResponse

Field	Type	Label	Description
user	User		Retrieved user.

GrantUserRightsRequest

Add the rights to the set of rights granted to the user.

Required authorization: HasRight(ParticipantAdmin) OR IsAuthenticatedIdentityProviderAdmin(identity_provider_id)

Field	Type	Label	Description
user_id	string		The user to whom to grant rights. Required
rights	Right	repeated	The rights to grant. Optional
identity_provider_id	string		The id of the Identity Provider Optional, if not set, assume the user is managed by the default identity provider.

GrantUserRightsResponse

Field	Type	Label	Description
newly_granted_rights	Right	repeated	The rights that were newly granted by the request.

ListUserRightsRequest

Required authorization: HasRight(ParticipantAdmin) OR IsAuthenticatedIdentityProviderAdmin(identity_provider_id) OR IsAuthenticatedUser(user_id)

Field	Type	Label	Description
user_id	string		The user for which to list the rights. If set to empty string (the default), then the rights for the authenticated user will be listed. Required
identity_provider_id	string		The id of the Identity Provider Optional, if not set, assume the user is managed by the default identity provider.

ListUserRightsResponse

Field	Type	Label	Description
rights	Right	repeated	All rights of the user.

ListUsersRequest

Required authorization: HasRight(ParticipantAdmin) OR IsAuthenticatedIdentityProviderAdmin(identity_provider_id)

Field	Type	Label	Description
page_token	string		Pagination token to determine the specific page to fetch. Leave empty to fetch the first page. Optional
page_size	int32		Maximum number of results to be returned by the server. The server will return no more than that many results, but it might return fewer. If 0, the server will decide the number of results to be returned. Optional
identity_provider_id	string		The id of the Identity Provider Optional, if not set, assume the user is managed by the default identity provider.

ListUsersResponse

Field	Type	Label	Description
users	User	repeated	A subset of users of the participant node that fit into this page.
next_page_token	string		Pagination token to retrieve the next page. Empty, if there are no further results.

RevokeUserRightsRequest

Remove the rights from the set of rights granted to the user.

Required authorization: HasRight(ParticipantAdmin) OR IsAuthenticatedIdentityProviderAdmin(identity_provider_id)

Field	Type	Label	Description
user_id	string		The user from whom to revoke rights. Required
rights	Right	repeated	The rights to revoke. Optional
identity_provider_id	string		The id of the Identity Provider Optional, if not set, assume the user is managed by the default identity provider.

RevokeUserRightsResponse

Field	Type	Label	Description
newly_revoked_rights	Right	repeated	The rights that were actually revoked by the request.

Right

A right granted to a user.

Field	Type	Label	Description
oneof kind.participant_admin	Right.ParticipantAdmin		The user can administer the participant node.
oneof kind.can_act_as	Right.CanActAs		The user can act as a specific party.
oneof kind.can_read_as	Right.CanReadAs		The user can read ledger data visible to a specific party.
oneof kind.identity_provider_admin	Right.IdentityProviderAdmin		The user can administer users and parties assigned to the same identity provider as the one of the user.

Right.CanActAs

Field	Type	Label	Description
party	string		The right to authorize commands for this party.

Right.CanReadAs

Field	Type	Label	Description
party	string		The right to read ledger data visible to this party.

Right.IdentityProviderAdmin

The right to administer the identity provider that the user is assigned to. It means, being able to manage users and parties that are also assigned to the same identity provider.

Right.ParticipantAdmin

The right to administer the participant node.

UpdateUserIdentityProviderRequest

Required authorization: HasRight(ParticipantAdmin)

Field	Type	Label	Description
user_id	string		User to update
source_identity_provider_id	string		Current identity provider id of the user
target_identity_provider_id	string		Target identity provider id of the user

UpdateUserIdentityProviderResponse

UpdateUserRequest

Required authorization: HasRight(ParticipantAdmin) OR IsAuthenticatedIdentityProviderAdmin(user.identity_provider_id)

Field	Type	Label	Description
user	User		The user to update. Required, Modifiable
update_mask	google.protobuf.FieldMask		An update mask specifies how and which properties of the User message are to be updated. An update mask consists of a set of update paths. A valid update path points to a field or a subfield relative to the User message. A valid update mask must: (1) contain at least one update path, (2) contain only valid update paths. Fields that can be updated are marked as Modifiable. An update path can also point to a non-Modifiable fields such as ‘id’ and ‘metadata.resource_version’ because they are used: (1) to identify the user resource subject to the update, (2) for concurrent change control. Examples of valid update paths: ‘primary_party’, ‘metadata’, ‘metadata.annotations’. For additional information see the documentation for standard protobuf3’s google.protobuf.FieldMask. For similar Ledger API see com.daml.ledger.api.v1.admin.UpdatePartyDetailsRequest. Required

UpdateUserResponse

Field	Type	Label	Description
user	User		Updated user

User

Users are used to dynamically manage the rights given to Daml applications. They are stored and managed per participant node.

Read the Authorization documentation to learn more.

Field	Type	Label	Description
id	string		The user identifier, which must be a non-empty string of at most 128 characters that are either alphanumeric ASCII characters or one of the symbols “@^$.!`-#+’~_|:”. Required
primary_party	string		The primary party as which this user reads and acts by default on the ledger provided it has the corresponding CanReadAs(primary_party) or CanActAs(primary_party) rights. Ledger API clients SHOULD set this field to a non-empty value for all users to enable the users to act on the ledger using their own Daml party. Users for participant administrators MAY have an associated primary party. Optional, Modifiable
is_deactivated	bool		When set, then the user is denied all access to the Ledger API. Otherwise, the user has access to the Ledger API as per the user’s rights. Optional, Modifiable
metadata	ObjectMeta		The metadata of this user. Note that the metadata.resource_version tracks changes to the properties described by the User message and not the user’s rights. Optional, Modifiable
identity_provider_id	string		The id of the identity provider configured by Identity Provider Config Optional, if not set, assume the user is managed by the default identity provider.

UserManagementService

Service to manage users and their rights for interacting with the Ledger API served by a participant node.

The authorization rules for its RPCs are specified on the <RpcName>Request messages as boolean expressions over these facts: (1) HasRight(r) denoting whether the authenticated user has right r and (2) IsAuthenticatedUser(uid) denoting whether uid is the empty string or equal to the id of the authenticated user. (3) IsAuthenticatedIdentityProviderAdmin(idp) denoting whether idp is equal to the identity_provider_id of the authenticated user and the user has an IdentityProviderAdmin right. If user_id is set to the empty string (the default), then the data for the authenticated user will be retrieved. If identity_provider_id is set to an empty string, then it’s effectively set to the value of access token’s ‘iss’ field if that is provided. If identity_provider_id remains an empty string, the default identity provider will be assumed.

The fields of request messages (and sub-messages) are marked either as Optional or Required: (1) Optional denoting the client may leave the field unset when sending a request. (2) Required denoting the client must set the field to a non-default value when sending a request.

A user resource consists of: (1) a set of properties represented by the User message, (2) a set of user rights, where each right is represented by the Right message.

A user resource, once it has been created, can be modified. In order to update the properties represented by the User message use the UpdateUser RPC. The only fields that can be modified are those marked as Modifiable. In order to grant or revoke user rights use GrantRights' and ``RevokeRights RPCs.

Method name	Request type	Response type	Description
CreateUser	CreateUserRequest	CreateUserResponse	Create a new user.
GetUser	GetUserRequest	GetUserResponse	Get the user data of a specific user or the authenticated user.
UpdateUser	UpdateUserRequest	UpdateUserResponse	Update selected modifiable attribute of a user resource described by the User message.
DeleteUser	DeleteUserRequest	DeleteUserResponse	Delete an existing user and all its rights.
ListUsers	ListUsersRequest	ListUsersResponse	List all existing users.
GrantUserRights	GrantUserRightsRequest	GrantUserRightsResponse	Grant rights to a user. Granting rights does not affect the resource version of the corresponding user.
RevokeUserRights	RevokeUserRightsRequest	RevokeUserRightsResponse	Revoke rights from a user. Revoking rights does not affect the resource version of the corresponding user.
ListUserRights	ListUserRightsRequest	ListUserRightsResponse	List the set of all rights granted to a user.
UpdateUserIdentityProviderId	UpdateUserIdentityProviderRequest	UpdateUserIdentityProviderResponse	Update the assignment of a user from one IDP to another.

com/daml/ledger/api/v1/command_completion_service.proto

Checkpoint

Checkpoints may be used to:

• detect time out of commands.
• provide an offset which can be used to restart consumption.

Field	Type	Label	Description
record_time	google.protobuf.Timestamp		All commands with a maximum record time below this value MUST be considered lost if their completion has not arrived before this checkpoint. Required
offset	LedgerOffset		May be used in a subsequent CompletionStreamRequest to resume the consumption of this stream at a later time. Required

CompletionEndRequest

Field	Type	Label	Description
ledger_id	string		Must correspond to the ledger ID reported by the Ledger Identification Service. Must be a valid LedgerString (as described in value.proto). Optional

CompletionEndResponse

Field	Type	Label	Description
offset	LedgerOffset		This offset can be used in a CompletionStreamRequest message. Required

CompletionStreamRequest

Field	Type	Label	Description
ledger_id	string		Must correspond to the ledger id reported by the Ledger Identification Service. Must be a valid LedgerString (as described in value.proto). Optional
application_id	string		Only completions of commands submitted with the same application_id will be visible in the stream. Must be a valid ApplicationIdString (as described in value.proto). Required unless authentication is used with a user token or a custom token specifying an application-id. In that case, the token’s user-id, respectively application-id, will be used for the request’s application_id.
parties	string	repeated	Non-empty list of parties whose data should be included. Only completions of commands for which at least one of the act_as parties is in the given set of parties will be visible in the stream. Must be a valid PartyIdString (as described in value.proto). Required
offset	LedgerOffset		This field indicates the minimum offset for completions. This can be used to resume an earlier completion stream. This offset is exclusive: the response will only contain commands whose offset is strictly greater than this. Optional, if not set the ledger uses the current ledger end offset instead.

CompletionStreamResponse

Field	Type	Label	Description
checkpoint	Checkpoint		This checkpoint may be used to restart consumption. The checkpoint is after any completions in this response. Optional
completions	Completion	repeated	If set, one or more completions.

CommandCompletionService

Allows clients to observe the status of their submissions. Commands may be submitted via the Command Submission Service. The on-ledger effects of their submissions are disclosed by the Transaction Service.

Commands may fail in 2 distinct manners:

1. Failure communicated synchronously in the gRPC error of the submission.
2. Failure communicated asynchronously in a Completion, see completion.proto.

Note that not only successfully submitted commands MAY produce a completion event. For example, the participant MAY choose to produce a completion event for a rejection of a duplicate command.

Clients that do not receive a successful completion about their submission MUST NOT assume that it was successful. Clients SHOULD subscribe to the CompletionStream before starting to submit commands to prevent race conditions.

Method name	Request type	Response type	Description
CompletionStream	CompletionStreamRequest	CompletionStreamResponse	Subscribe to command completion events.
CompletionEnd	CompletionEndRequest	CompletionEndResponse	Returns the offset after the latest completion.

com/daml/ledger/api/v1/command_service.proto

SubmitAndWaitForTransactionIdResponse

Field	Type	Label	Description
transaction_id	string		The id of the transaction that resulted from the submitted command. Must be a valid LedgerString (as described in value.proto). Required
completion_offset	string		The format of this field is described in ledger_offset.proto. Optional

SubmitAndWaitForTransactionResponse

Field	Type	Label	Description
transaction	Transaction		The flat transaction that resulted from the submitted command. Required
completion_offset	string		The format of this field is described in ledger_offset.proto. Optional

SubmitAndWaitForTransactionTreeResponse

Field	Type	Label	Description
transaction	TransactionTree		The transaction tree that resulted from the submitted command. Required
completion_offset	string		The format of this field is described in ledger_offset.proto. Optional

SubmitAndWaitRequest

These commands are atomic, and will become transactions.

Field	Type	Label	Description
commands	Commands		The commands to be submitted. Required

CommandService

Command Service is able to correlate submitted commands with completion data, identify timeouts, and return contextual information with each tracking result. This supports the implementation of stateless clients.

Note that submitted commands generally produce completion events as well, even in case a command gets rejected. For example, the participant MAY choose to produce a completion event for a rejection of a duplicate command.

Method name	Request type	Response type	Description
SubmitAndWait	SubmitAndWaitRequest	.google.protobuf.Empty	Submits a single composite command and waits for its result. Propagates the gRPC error of failed submissions including Daml interpretation errors.
SubmitAndWaitForTransactionId	SubmitAndWaitRequest	SubmitAndWaitForTransactionIdResponse	Submits a single composite command, waits for its result, and returns the transaction id. Propagates the gRPC error of failed submissions including Daml interpretation errors.
SubmitAndWaitForTransaction	SubmitAndWaitRequest	SubmitAndWaitForTransactionResponse	Submits a single composite command, waits for its result, and returns the transaction. Propagates the gRPC error of failed submissions including Daml interpretation errors.
SubmitAndWaitForTransactionTree	SubmitAndWaitRequest	SubmitAndWaitForTransactionTreeResponse	Submits a single composite command, waits for its result, and returns the transaction tree. Propagates the gRPC error of failed submissions including Daml interpretation errors.

com/daml/ledger/api/v1/command_submission_service.proto

SubmitRequest

The submitted commands will be processed atomically in a single transaction. Moreover, each Command in commands will be executed in the order specified by the request.

Field	Type	Label	Description
commands	Commands		The commands to be submitted in a single transaction. Required

CommandSubmissionService

Allows clients to attempt advancing the ledger’s state by submitting commands. The final states of their submissions are disclosed by the Command Completion Service. The on-ledger effects of their submissions are disclosed by the Transaction Service.

Commands may fail in 2 distinct manners:

1. Failure communicated synchronously in the gRPC error of the submission.
2. Failure communicated asynchronously in a Completion, see completion.proto.

Note that not only successfully submitted commands MAY produce a completion event. For example, the participant MAY choose to produce a completion event for a rejection of a duplicate command.

Clients that do not receive a successful completion about their submission MUST NOT assume that it was successful. Clients SHOULD subscribe to the CompletionStream before starting to submit commands to prevent race conditions.

Method name	Request type	Response type	Description
Submit	SubmitRequest	.google.protobuf.Empty	Submit a single composite command.

com/daml/ledger/api/v1/commands.proto

Command

A command can either create a new contract or exercise a choice on an existing contract.

Field	Type	Label	Description
oneof command.create	CreateCommand
oneof command.exercise	ExerciseCommand
oneof command.exerciseByKey	ExerciseByKeyCommand
oneof command.createAndExercise	CreateAndExerciseCommand

Commands

A composite command that groups multiple commands together.

Field	Type	Label	Description
ledger_id	string		Must correspond to the ledger ID reported by the Ledger Identification Service. Must be a valid LedgerString (as described in value.proto). Optional
workflow_id	string		Identifier of the on-ledger workflow that this command is a part of. Must be a valid LedgerString (as described in value.proto). Optional
application_id	string		Uniquely identifies the application or participant user that issued the command. Must be a valid ApplicationIdString (as described in value.proto). Required unless authentication is used with a user token or a custom token specifying an application-id. In that case, the token’s user-id, respectively application-id, will be used for the request’s application_id.
command_id	string		Uniquely identifies the command. The triple (application_id, party + act_as, command_id) constitutes the change ID for the intended ledger change, where party + act_as is interpreted as a set of party names. The change ID can be used for matching the intended ledger changes with all their completions. Must be a valid LedgerString (as described in value.proto). Required
party	string		Party on whose behalf the command should be executed. If ledger API authorization is enabled, then the authorization metadata must authorize the sender of the request to act on behalf of the given party. Must be a valid PartyIdString (as described in value.proto). Deprecated in favor of the act_as field. If both are set, then the effective list of parties on whose behalf the command should be executed is the union of all parties listed in party and act_as. Optional
commands	Command	repeated	Individual elements of this atomic command. Must be non-empty. Required
oneof deduplication_period.deduplication_time	google.protobuf.Duration		Specifies the length of the deduplication period. Same semantics apply as for deduplication_duration. Must be non-negative. Must not exceed the maximum deduplication time (see ledger_configuration_service.proto).
oneof deduplication_period.deduplication_duration	google.protobuf.Duration		Specifies the length of the deduplication period. It is interpreted relative to the local clock at some point during the submission’s processing. Must be non-negative. Must not exceed the maximum deduplication time (see ledger_configuration_service.proto).
oneof deduplication_period.deduplication_offset	string		Specifies the start of the deduplication period by a completion stream offset (exclusive). Must be a valid LedgerString (as described in ledger_offset.proto).
min_ledger_time_abs	google.protobuf.Timestamp		Lower bound for the ledger time assigned to the resulting transaction. Note: The ledger time of a transaction is assigned as part of command interpretation. Use this property if you expect that command interpretation will take a considerate amount of time, such that by the time the resulting transaction is sequenced, its assigned ledger time is not valid anymore. Must not be set at the same time as min_ledger_time_rel. Optional
min_ledger_time_rel	google.protobuf.Duration		Same as min_ledger_time_abs, but specified as a duration, starting from the time the command is received by the server. Must not be set at the same time as min_ledger_time_abs. Optional
act_as	string	repeated	Set of parties on whose behalf the command should be executed. If ledger API authorization is enabled, then the authorization metadata must authorize the sender of the request to act on behalf of each of the given parties. This field supersedes the party field. The effective set of parties on whose behalf the command should be executed is the union of all parties listed in party and act_as, which must be non-empty. Each element must be a valid PartyIdString (as described in value.proto). Optional
read_as	string	repeated	Set of parties on whose behalf (in addition to all parties listed in act_as) contracts can be retrieved. This affects Daml operations such as fetch, fetchByKey, lookupByKey, exercise, and exerciseByKey. Note: A participant node of a Daml network can host multiple parties. Each contract present on the participant node is only visible to a subset of these parties. A command can only use contracts that are visible to at least one of the parties in act_as or read_as. This visibility check is independent from the Daml authorization rules for fetch operations. If ledger API authorization is enabled, then the authorization metadata must authorize the sender of the request to read contract data on behalf of each of the given parties. Optional
submission_id	string		A unique identifier to distinguish completions for different submissions with the same change ID. Typically a random UUID. Applications are expected to use a different UUID for each retry of a submission with the same change ID. Must be a valid LedgerString (as described in value.proto).

If omitted, the participant or the committer may set a value of their choice. Optional

• • disclosed_contracts

  • DisclosedContract
  • repeated
  • Additional contracts used to resolve contract & contract key lookups. Optional

CreateAndExerciseCommand

Create a contract and exercise a choice on it in the same transaction.

Field	Type	Label	Description
template_id	Identifier		The template of the contract the client wants to create. Required
create_arguments	Record		The arguments required for creating a contract from this template. Required
choice	string		The name of the choice the client wants to exercise. Must be a valid NameString (as described in value.proto). Required
choice_argument	Value		The argument for this choice. Required

CreateCommand

Create a new contract instance based on a template.

Field	Type	Label	Description
template_id	Identifier		The template of contract the client wants to create. Required
create_arguments	Record		The arguments required for creating a contract from this template. Required

DisclosedContract

An additional contract that is used to resolve contract & contract key lookups.

Field	Type	Label	Description
template_id	Identifier		The template id of the contract. Required
contract_id	string		The contract id Required
created_event_blob	bytes		Opaque byte string containing the complete payload required by the Daml engine to reconstruct a contract not known to the receiving participant. Required

ExerciseByKeyCommand

Exercise a choice on an existing contract specified by its key.

Field	Type	Label	Description
template_id	Identifier		The template of contract the client wants to exercise. Required
contract_key	Value		The key of the contract the client wants to exercise upon. Required
choice	string		The name of the choice the client wants to exercise. Must be a valid NameString (as described in value.proto) Required
choice_argument	Value		The argument for this choice. Required

ExerciseCommand

Exercise a choice on an existing contract.

Field	Type	Label	Description
template_id	Identifier		The template of contract the client wants to exercise. Required
contract_id	string		The ID of the contract the client wants to exercise upon. Must be a valid LedgerString (as described in value.proto). Required
choice	string		The name of the choice the client wants to exercise. Must be a valid NameString (as described in value.proto) Required
choice_argument	Value		The argument for this choice. Required

com/daml/ledger/api/v1/completion.proto

Completion

A completion represents the status of a submitted command on the ledger: it can be successful or failed.

Field	Type	Label	Description
command_id	string		The ID of the succeeded or failed command. Must be a valid LedgerString (as described in value.proto). Required
status	google.rpc.Status		Identifies the exact type of the error. It uses the same format of conveying error details as it is used for the RPC responses of the APIs. Optional
transaction_id	string		The transaction_id of the transaction that resulted from the command with command_id. Only set for successfully executed commands. Must be a valid LedgerString (as described in value.proto). Optional
application_id	string		The application-id or user-id that was used for the submission, as described in commands.proto. Must be a valid ApplicationIdString (as described in value.proto). Optional for historic completions where this data is not available.
act_as	string	repeated	The set of parties on whose behalf the commands were executed. Contains the union of party and act_as from commands.proto. The order of the parties need not be the same as in the submission. Each element must be a valid PartyIdString (as described in value.proto). Optional for historic completions where this data is not available.
submission_id	string		The submission ID this completion refers to, as described in commands.proto. Must be a valid LedgerString (as described in value.proto). Optional
oneof deduplication_period.deduplication_offset	string		Specifies the start of the deduplication period by a completion stream offset (exclusive).

Must be a valid LedgerString (as described in value.proto).

• • oneof deduplication_period.deduplication_duration
  • google.protobuf.Duration
  • Specifies the length of the deduplication period. It is measured in record time of completions.

Must be non-negative.

• • trace_context

  • TraceContext
  • Optional; ledger api trace context

The trace context transported in this message corresponds to the trace context supplied by the client application in a HTTP2 header of the original command submission. We typically use a header to transfer this type of information. Here we use message body, because it is used in gRPC streams which do not support per message headers. This field will be populated with the trace context contained in the original submission. If that was not provided, a unique ledger-api-server generated trace context will be used instead.

com/daml/ledger/api/v1/contract_metadata.proto

ContractMetadata

Contract-related metadata used in DisclosedContract (that can be included in command submission) or forwarded as part of the CreatedEvent in Active Contract Set or Transaction streams.

Field	Type	Label	Description
created_at	google.protobuf.Timestamp		Ledger effective time of the transaction that created the contract. Required
contract_key_hash	bytes		Hash of the contract key if defined. Optional
driver_metadata	bytes		Driver-specific metadata. This is opaque and cannot be decoded. Optional

com/daml/ledger/api/v1/event.proto

ArchivedEvent

Records that a contract has been archived, and choices may no longer be exercised on it.

Field	Type	Label	Description
event_id	string		The ID of this particular event. Must be a valid LedgerString (as described in value.proto). Required
contract_id	string		The ID of the archived contract. Must be a valid LedgerString (as described in value.proto). Required
template_id	Identifier		The template of the archived contract. Required
witness_parties	string	repeated	The parties that are notified of this event. For an ArchivedEvent, these are the intersection of the stakeholders of the contract in question and the parties specified in the TransactionFilter. The stakeholders are the union of the signatories and the observers of the contract. Each one of its elements must be a valid PartyIdString (as described in value.proto). Required

CreatedEvent

Records that a contract has been created, and choices may now be exercised on it.

Field	Type	Label	Description
event_id	string		The ID of this particular event. Must be a valid LedgerString (as described in value.proto). Required
contract_id	string		The ID of the created contract. Must be a valid LedgerString (as described in value.proto). Required
template_id	Identifier		The template of the created contract. Required
contract_key	Value		The key of the created contract. This will be set if and only if create_arguments is set and template_id defines a contract key. Optional
create_arguments	Record		The arguments that have been used to create the contract. Set either: - if there was a party, which is in the witness_parties of this event, and for which an InclusiveFilters exists with the template_id of this event among the template_ids, - or if there was a party, which is in the witness_parties of this event, and for which a wildcard filter exists (Filters without InclusiveFilters, or with an InclusiveFilters with empty template_ids and empty interface_filters). Optional
created_event_blob	bytes		Opaque representation of contract create event payload intended for forwarding to an API server as a contract disclosed as part of a command submission. Optional
interface_views	InterfaceView	repeated	Interface views specified in the transaction filter. Includes an InterfaceView for each interface for which there is a InterfaceFilter with - its party in the witness_parties of this event, - and which is implemented by the template of this event, - and which has include_interface_view set. Optional
witness_parties	string	repeated	The parties that are notified of this event. When a CreatedEvent is returned as part of a transaction tree, this will include all the parties specified in the TransactionFilter that are informees of the event. If served as part of a flat transaction those will be limited to all parties specified in the TransactionFilter that are stakeholders of the contract (i.e. either signatories or observers). In case of v2 API: If the CreatedEvent is returned as part of an AssignedEvent, ActiveContract or IncompleteUnassigned (so the event is related to an assignment or unassignment): this will include all parties of the TransactionFilter that are stakeholders of the contract. Required
signatories	string	repeated	The signatories for this contract as specified by the template. Required
observers	string	repeated	The observers for this contract as specified explicitly by the template or implicitly as choice controllers. This field never contains parties that are signatories. Required
agreement_text	google.protobuf.StringValue		The agreement text of the contract. We use StringValue to properly reflect optionality on the wire for backwards compatibility. This is necessary since the empty string is an acceptable (and in fact the default) agreement text, but also the default string in protobuf. This means a newer client works with an older sandbox seamlessly. Optional
created_at	google.protobuf.Timestamp		Ledger effective time of the transaction that created the contract. Required

Event

An event in the flat transaction stream can either be the creation or the archiving of a contract.

In the transaction service the events are restricted to the events visible for the parties specified in the transaction filter. Each event message type below contains a witness_parties field which indicates the subset of the requested parties that can see the event in question. In the flat transaction stream you’ll only receive events that have witnesses.

Field	Type	Label	Description
oneof event.created	CreatedEvent
oneof event.archived	ArchivedEvent

ExercisedEvent

Records that a choice has been exercised on a target contract.

Field	Type	Label	Description
event_id	string		The ID of this particular event. Must be a valid LedgerString (as described in value.proto). Required
contract_id	string		The ID of the target contract. Must be a valid LedgerString (as described in value.proto). Required
template_id	Identifier		The template of the target contract. Required
interface_id	Identifier		The interface where the choice is defined, if inherited. Optional
choice	string		The choice that was exercised on the target contract. Must be a valid NameString (as described in value.proto). Required
choice_argument	Value		The argument of the exercised choice. Required
acting_parties	string	repeated	The parties that exercised the choice. Each element must be a valid PartyIdString (as described in value.proto). Required
consuming	bool		If true, the target contract may no longer be exercised. Required
witness_parties	string	repeated	The parties that are notified of this event. The witnesses of an exercise node will depend on whether the exercise was consuming or not. If consuming, the witnesses are the union of the stakeholders and the actors. If not consuming, the witnesses are the union of the signatories and the actors. Note that the actors might not necessarily be observers and thus signatories. This is the case when the controllers of a choice are specified using “flexible controllers”, using the choice ... controller syntax, and said controllers are not explicitly marked as observers. Each element must be a valid PartyIdString (as described in value.proto). Required
child_event_ids	string	repeated	References to further events in the same transaction that appeared as a result of this ExercisedEvent. It contains only the immediate children of this event, not all members of the subtree rooted at this node. The order of the children is the same as the event order in the transaction. Each element must be a valid LedgerString (as described in value.proto). Optional
exercise_result	Value		The result of exercising the choice. Required

InterfaceView

View of a create event matched by an interface filter.

Field	Type	Label	Description
interface_id	Identifier		The interface implemented by the matched event. Required
view_status	google.rpc.Status		Whether the view was successfully computed, and if not, the reason for the error. The error is reported using the same rules for error codes and messages as the errors returned for API requests. Required
view_value	Record		The value of the interface’s view method on this event. Set if it was requested in the InterfaceFilter and it could be sucessfully computed. Optional

com/daml/ledger/api/v1/event_query_service.proto

GetEventsByContractIdRequest

Field	Type	Label	Description
contract_id	string		The contract id being queried. Required
requesting_parties	string	repeated	The parties whose events the client expects to see. The events associated with the contract id will only be returned if the requesting parties includes at least one party that is a stakeholder of the event. For a definition of stakeholders see https://docs.daml.com/concepts/ledger-model/ledger-privacy.html#contract-observers-and-stakeholders Required

GetEventsByContractIdResponse

Field	Type	Label	Description
create_event	CreatedEvent		The create event for the contract with the contract_id given in the request provided it exists and has not yet been pruned. Optional
archive_event	ArchivedEvent		The archive event for the contract with the contract_id given in the request provided such an archive event exists and it has not yet been pruned. Optional

GetEventsByContractKeyRequest

Field	Type	Label	Description
contract_key	Value		The contract key to search for. Required
template_id	Identifier		The template id associated with the contract key Required
requesting_parties	string	repeated	The parties whose events the client expects to see. The events associated with the contract key will only be returned if the requesting parties includes at least one party that is a stakeholder of the event. For a definition of stakeholders see https://docs.daml.com/concepts/ledger-model/ledger-privacy.html#contract-observers-and-stakeholders To gain visibility of all contract key bindings and to ensure consistent performance use a key maintainer as a requesting party. Required
continuation_token	string		A continuation_token associated with a previous response. Optional

GetEventsByContractKeyResponse

Field	Type	Label	Description
create_event	CreatedEvent		The most recent create event for a contract with the key given in the request, if no continuation_token is provided. If a continuation_token is provided, then this is the most recent create event preceding the create event whose continuation_token was provided. Optional
archive_event	ArchivedEvent		The archive event for the create event provided the created contract is archived. Optional
continuation_token	string		If the continuation_token is populated then there may be additional events available. To retrieve these events use the continuation_token in a subsequent request. Optional

EventQueryService

Query events by contract id or key.

Method name	Request type	Response type	Description
GetEventsByContractId	GetEventsByContractIdRequest	GetEventsByContractIdResponse	Get the create and the consuming exercise event for the contract with the provided ID. No events will be returned for contracts that have been pruned because they have already been archived before the latest pruning offset.
GetEventsByContractKey	GetEventsByContractKeyRequest	GetEventsByContractKeyResponse	Get all create and consuming exercise events for the contracts with the provided contract key. Only events for unpruned contracts will be returned. Matching events are delivered in reverse chronological order, i.e., the most recent events are delivered first.

com/daml/ledger/api/v1/experimental_features.proto

AcsActiveAtOffsetFeature

Whether the Ledger API supports requesting ACS at an offset

Field	Type	Label	Description
supported	bool

CommandDeduplicationFeatures

Feature descriptors for command deduplication intended to be used for adapting Ledger API tests.

Field	Type	Label	Description
deduplication_period_support	CommandDeduplicationPeriodSupport
deduplication_type	CommandDeduplicationType
max_deduplication_duration_enforced	bool		The ledger will reject any requests which specify a deduplication period which exceeds the specified max deduplication duration. This is also enforced for ledgers that convert deduplication periods specified as offsets to durations.

CommandDeduplicationPeriodSupport

Feature descriptor specifying how deduplication periods can be specified and how they are handled by the participant node.

Field	Type	Label	Description
offset_support	CommandDeduplicationPeriodSupport.OffsetSupport
duration_support	CommandDeduplicationPeriodSupport.DurationSupport

ExperimentalCommitterEventLog

How the committer stores events.

Field	Type	Label	Description
event_log_type	ExperimentalCommitterEventLog.CommitterEventLogType

ExperimentalContractIds

See daml-lf/spec/contract-id.rst for more information on contract ID formats.

Field	Type	Label	Description
v1	ExperimentalContractIds.ContractIdV1Support

ExperimentalExplicitDisclosure

Enables the use of explicitly disclosed contracts for command submission

Field	Type	Label	Description
supported	bool

ExperimentalFeatures

See the feature message definitions for descriptions.

Field	Type	Label	Description
self_service_error_codes	ExperimentalSelfServiceErrorCodes
static_time	ExperimentalStaticTime
command_deduplication	CommandDeduplicationFeatures
optional_ledger_id	ExperimentalOptionalLedgerId
contract_ids	ExperimentalContractIds
committer_event_log	ExperimentalCommitterEventLog
explicit_disclosure	ExperimentalExplicitDisclosure
user_and_party_local_metadata_extensions	ExperimentalUserAndPartyLocalMetadataExtensions
acs_active_at_offset	AcsActiveAtOffsetFeature
template_filters	TransactionsWithTemplateFilters

ExperimentalOptionalLedgerId

Ledger API does not require ledgerId to be set in the requests.

ExperimentalSelfServiceErrorCodes

GRPC self-service error codes are returned by the Ledger API.

ExperimentalStaticTime

Ledger is in the static time mode and exposes a time service.

Field	Type	Label	Description
supported	bool

ExperimentalUserAndPartyLocalMetadataExtensions

Whether the Ledger API supports: - is_deactivated user property, - metadata with annotations and resource version for users and parties, - update calls for users and parties.

Field	Type	Label	Description
supported	bool

TransactionsWithTemplateFilters

Whether the Ledger API supports querying for transaction streams using template filters

Field	Type	Label	Description
supported	bool

CommandDeduplicationPeriodSupport.DurationSupport

How the participant node supports deduplication periods specified as durations.

Name	Number	Description
DURATION_NATIVE_SUPPORT	0
DURATION_CONVERT_TO_OFFSET	1

CommandDeduplicationPeriodSupport.OffsetSupport

How the participant node supports deduplication periods specified using offsets.

Name	Number	Description
OFFSET_NOT_SUPPORTED	0
OFFSET_NATIVE_SUPPORT	1
OFFSET_CONVERT_TO_DURATION	2

CommandDeduplicationType

How the participant node reports duplicate command submissions.

Name	Number	Description
ASYNC_ONLY	0	Duplicate commands are exclusively reported asynchronously via completions.
ASYNC_AND_CONCURRENT_SYNC	1	Commands that are duplicates of concurrently submitted commands are reported synchronously via a gRPC error on the command submission, while all other duplicate commands are reported asynchronously via completions.

ExperimentalCommitterEventLog.CommitterEventLogType

Name	Number	Description
CENTRALIZED	0	Default. There is a single log.
DISTRIBUTED	1	There is more than one event log. Usually, when the committer itself is distributed. Or there are per-participant event logs. It may result in transaction IDs being different for the same transaction across participants, for example.

ExperimentalContractIds.ContractIdV1Support

Name	Number	Description
SUFFIXED	0	Contract IDs must be suffixed. Distributed ledger implementations must reject non-suffixed contract IDs.
NON_SUFFIXED	1	Contract IDs do not need to be suffixed. This can be useful for shorter contract IDs in centralized committer implementations. Suffixed contract IDs must also be supported.

com/daml/ledger/api/v1/ledger_configuration_service.proto

GetLedgerConfigurationRequest

Field	Type	Label	Description
ledger_id	string		Must correspond to the ledger ID reported by the Ledger Identification Service. Must be a valid LedgerString (as described in value.proto). Optional

GetLedgerConfigurationResponse

Field	Type	Label	Description
ledger_configuration	LedgerConfiguration		The latest ledger configuration.

LedgerConfiguration

LedgerConfiguration contains parameters of the ledger instance that may be useful to clients.

Field	Type	Label	Description
max_deduplication_duration	google.protobuf.Duration		If a command submission specifies a deduplication period of length up to max_deduplication_duration, the submission SHOULD not be rejected with FAILED_PRECONDITION because the deduplication period starts too early. The deduplication period is measured on a local clock of the participant or Daml ledger, and therefore subject to clock skews and clock drifts. Command submissions with longer periods MAY get accepted though.

LedgerConfigurationService

LedgerConfigurationService allows clients to subscribe to changes of the ledger configuration. In V2 Ledger API this service is not available anymore.

Method name	Request type	Response type	Description
GetLedgerConfiguration	GetLedgerConfigurationRequest	GetLedgerConfigurationResponse	Returns the latest configuration as the first response, and publishes configuration updates in the same stream.

com/daml/ledger/api/v1/ledger_identity_service.proto

GetLedgerIdentityRequest

GetLedgerIdentityResponse

Field	Type	Label	Description
ledger_id	string		The ID of the ledger exposed by the server. Must be a valid LedgerString (as described in value.proto). Optional

LedgerIdentityService

DEPRECATED: This service is now deprecated and ledger identity string is optional for all Ledger API requests.

Allows clients to verify that the server they are communicating with exposes the ledger they wish to operate on. In V2 Ledger API this service is not available anymore.

Method name	Request type	Response type	Description
GetLedgerIdentity	GetLedgerIdentityRequest	GetLedgerIdentityResponse	Clients may call this RPC to return the identifier of the ledger they are connected to.

com/daml/ledger/api/v1/ledger_offset.proto

LedgerOffset

Describes a specific point on the ledger.

The Ledger API endpoints that take offsets allow to specify portions of the ledger that are relevant for the client to read.

Offsets returned by the Ledger API can be used as-is (e.g. to keep track of processed transactions and provide a restart point to use in case of need).

The format of absolute offsets is opaque to the client: no client-side transformation of an offset is guaranteed to return a meaningful offset.

The server implementation ensures internally that offsets are lexicographically comparable.

Field	Type	Label	Description
oneof value.absolute	string		The format of this string is specific to the ledger and opaque to the client.
oneof value.boundary	LedgerOffset.LedgerBoundary

LedgerOffset.LedgerBoundary

Name	Number	Description
LEDGER_BEGIN	0	Refers to the first transaction.
LEDGER_END	1	Refers to the currently last transaction, which is a moving target.

com/daml/ledger/api/v1/package_service.proto

GetPackageRequest

Field	Type	Label	Description
ledger_id	string		Must correspond to the ledger ID reported by the Ledger Identification Service. Must be a valid LedgerString (as described in value.proto). Optional
package_id	string		The ID of the requested package. Must be a valid PackageIdString (as described in value.proto). Required

GetPackageResponse

Field	Type	Label	Description
hash_function	HashFunction		The hash function we use to calculate the hash. Required
archive_payload	bytes		Contains a daml_lf ArchivePayload. See further details in daml_lf.proto. Required
hash	string		The hash of the archive payload, can also used as a package_id. Must be a valid PackageIdString (as described in value.proto). Required

GetPackageStatusRequest

Field	Type	Label	Description
ledger_id	string		Must correspond to the ledger ID reported by the Ledger Identification Service. Must be a valid LedgerString (as described in value.proto). Optional
package_id	string		The ID of the requested package. Must be a valid PackageIdString (as described in value.proto). Required

GetPackageStatusResponse

Field	Type	Label	Description
package_status	PackageStatus		The status of the package.

ListPackagesRequest

Field	Type	Label	Description
ledger_id	string		Must correspond to the ledger ID reported by the Ledger Identification Service. Must be a valid LedgerString (as described in value.proto). Optional

ListPackagesResponse

Field	Type	Label	Description
package_ids	string	repeated	The IDs of all Daml-LF packages supported by the server. Each element must be a valid PackageIdString (as described in value.proto). Required

HashFunction

Name	Number	Description
SHA256	0

PackageStatus

Name	Number	Description
UNKNOWN	0	The server is not aware of such a package.
REGISTERED	1	The server is able to execute Daml commands operating on this package.

PackageService

Allows clients to query the Daml-LF packages that are supported by the server.

Method name	Request type	Response type	Description
ListPackages	ListPackagesRequest	ListPackagesResponse	Returns the identifiers of all supported packages.
GetPackage	GetPackageRequest	GetPackageResponse	Returns the contents of a single package.
GetPackageStatus	GetPackageStatusRequest	GetPackageStatusResponse	Returns the status of a single package.

com/daml/ledger/api/v1/testing/time_service.proto

GetTimeRequest

Field	Type	Label	Description
ledger_id	string		Must correspond to the ledger ID reported by the Ledger Identification Service. Must be a valid LedgerString (as describe in value.proto). Optional

GetTimeResponse

Field	Type	Label	Description
current_time	google.protobuf.Timestamp		The current time according to the ledger server.

SetTimeRequest

Field	Type	Label	Description
ledger_id	string		Must correspond to the ledger ID reported by the Ledger Identification Service. Must be a valid LedgerString (as describe in value.proto). Optional
current_time	google.protobuf.Timestamp		MUST precisely match the current time as it’s known to the ledger server.
new_time	google.protobuf.Timestamp		The time the client wants to set on the ledger. MUST be a point int time after current_time.

TimeService

Optional service, exposed for testing static time scenarios.

Method name	Request type	Response type	Description
GetTime	GetTimeRequest	GetTimeResponse	Returns a stream of time updates. Always returns at least one response, where the first one is the current time. Subsequent responses are emitted whenever the ledger server’s time is updated.
SetTime	SetTimeRequest	.google.protobuf.Empty	Allows clients to change the ledger’s clock in an atomic get-and-set operation.

com/daml/ledger/api/v1/trace_context.proto

TraceContext

Field	Type	Label	Description
traceparent	google.protobuf.StringValue		https://www.w3.org/TR/trace-context/
tracestate	google.protobuf.StringValue

com/daml/ledger/api/v1/transaction.proto

Transaction

Filtered view of an on-ledger transaction’s create and archive events.

Field	Type	Label	Description
transaction_id	string		Assigned by the server. Useful for correlating logs. Must be a valid LedgerString (as described in value.proto). Required
command_id	string		The ID of the command which resulted in this transaction. Missing for everyone except the submitting party. Must be a valid LedgerString (as described in value.proto). Optional
workflow_id	string		The workflow ID used in command submission. Must be a valid LedgerString (as described in value.proto). Optional
effective_at	google.protobuf.Timestamp		Ledger effective time. Must be a valid LedgerString (as described in value.proto). Required
events	Event	repeated	The collection of events. Only contains CreatedEvent or ArchivedEvent. Required
offset	string		The absolute offset. The format of this field is described in ledger_offset.proto. Required
trace_context	TraceContext		Optional; ledger api trace context

The trace context transported in this message corresponds to the trace context supplied by the client application in a HTTP2 header of the original command submission. We typically use a header to transfer this type of information. Here we use message body, because it is used in gRPC streams which do not support per message headers. This field will be populated with the trace context contained in the original submission. If that was not provided, a unique ledger-api-server generated trace context will be used instead.

TransactionTree

Complete view of an on-ledger transaction.

Field	Type	Label	Description
transaction_id	string		Assigned by the server. Useful for correlating logs. Must be a valid LedgerString (as described in value.proto). Required
command_id	string		The ID of the command which resulted in this transaction. Missing for everyone except the submitting party. Must be a valid LedgerString (as described in value.proto). Optional
workflow_id	string		The workflow ID used in command submission. Only set if the workflow_id for the command was set. Must be a valid LedgerString (as described in value.proto). Optional
effective_at	google.protobuf.Timestamp		Ledger effective time. Required
offset	string		The absolute offset. The format of this field is described in ledger_offset.proto. Required
events_by_id	TransactionTree.EventsByIdEntry	repeated	Changes to the ledger that were caused by this transaction. Nodes of the transaction tree. Each key be a valid LedgerString (as describe in value.proto). Required
root_event_ids	string	repeated	Roots of the transaction tree. Each element must be a valid LedgerString (as describe in value.proto). The elements are in the same order as the commands in the corresponding Commands object that triggered this transaction. Required
trace_context	TraceContext		Optional; ledger api trace context

The trace context transported in this message corresponds to the trace context supplied by the client application in a HTTP2 header of the original command submission. We typically use a header to transfer this type of information. Here we use message body, because it is used in gRPC streams which do not support per message headers. This field will be populated with the trace context contained in the original submission. If that was not provided, a unique ledger-api-server generated trace context will be used instead.

TransactionTree.EventsByIdEntry

Field	Type	Label	Description
key	string
value	TreeEvent

TreeEvent

Each tree event message type below contains a witness_parties field which indicates the subset of the requested parties that can see the event in question.

Note that transaction trees might contain events with _no_ witness parties, which were included simply because they were children of events which have witnesses.

Field	Type	Label	Description
oneof kind.created	CreatedEvent
oneof kind.exercised	ExercisedEvent

com/daml/ledger/api/v1/transaction_filter.proto

Filters

The union of a set of contract filters, or a wildcard.

Field	Type	Label	Description
inclusive	InclusiveFilters		If set, then contracts matching any of the InclusiveFilters match this filter. If not set, or if InclusiveFilters has empty template_ids and empty interface_filters: any contract matches this filter. Optional

InclusiveFilters

A filter that matches all contracts that are either an instance of one of the template_ids or that match one of the interface_filters.

Field	Type	Label	Description
template_ids	Identifier	repeated	A collection of templates for which the data will be included in the create_arguments of a matching CreatedEvent. SHOULD NOT contain duplicates. All template_ids need to be valid: corresponding templates should be defined in one of the available packages at the time of the query. Deprecated in favor of the template_filters. If the template_filters field is set, the template_ids field is ignored. Optional
interface_filters	InterfaceFilter	repeated	Include an InterfaceView for every InterfaceFilter matching a contract. The InterfaceFilter instances MUST each use a unique interface_id. Optional
template_filters	TemplateFilter	repeated	A collection of templates for which the data will be included in the create_arguments of a matching CreatedEvent. SHOULD NOT contain duplicate templates. In contrast to the template_ids field, one can specify whether the create event payloads should be provided alongside the create arguments. If a contract is simultaneously selected by a template filter and one or more interface filters, the corresponding include_created_event_blob are consolidated using an OR operation. Optional

InterfaceFilter

This filter matches contracts that implement a specific interface.

Field	Type	Label	Description
interface_id	Identifier		The interface that a matching contract must implement. The interface_id needs to be valid: corresponding interface should be defined in one of the available packages at the time of the query. Required
include_interface_view	bool		Whether to include the interface view on the contract in the returned CreatedEvent. Use this to access contract data in a uniform manner in your API client. Optional
include_created_event_blob	bool		Whether to include a created_event_blob in the returned CreatedEvent. Use this to access the contract create event payload in your API client for submitting it as a disclosed contract with future commands. Optional

TemplateFilter

This filter matches contracts of a specific template.

Field	Type	Label	Description
template_id	Identifier		A template for which the payload should be included in the response. The template_id needs to be valid: corresponding template should be defined in one of the available packages at the time of the query. Required
include_created_event_blob	bool		Whether to include a created_event_blob in the returned CreatedEvent. Use this to access the contract event payload in your API client for submitting it as a disclosed contract with future commands. Optional

TransactionFilter

A filter both for filtering create and archive events as well as for filtering transaction trees.

Field	Type	Label	Description
filters_by_party	TransactionFilter.FiltersByPartyEntry	repeated	Each key must be a valid PartyIdString (as described in value.proto). The interpretation of the filter depends on the stream being filtered: (1) For transaction tree streams only party filters with wildcards are allowed, and all subtrees whose root has one of the listed parties as an informee are returned. (2) For transaction and active-contract-set streams create and archive events are returned for all contracts whose stakeholders include at least one of the listed parties and match the per-party filter. Required

TransactionFilter.FiltersByPartyEntry

Field	Type	Label	Description
key	string
value	Filters

com/daml/ledger/api/v1/transaction_service.proto

GetFlatTransactionResponse

Field	Type	Label	Description
transaction	Transaction

GetLatestPrunedOffsetsRequest

Empty for now, but may contain fields in the future.

GetLatestPrunedOffsetsResponse

Field	Type	Label	Description
participant_pruned_up_to_inclusive	LedgerOffset		The offset up to which the ledger has been pruned, disregarding the state of all divulged contracts pruning.
all_divulged_contracts_pruned_up_to_inclusive	LedgerOffset		The offset up to which all divulged events have been pruned on the ledger. It can be at or before the participant_pruned_up_to_inclusive offset. For more details about all divulged events pruning, see PruneRequest.prune_all_divulged_contracts in participant_pruning_service.proto.

GetLedgerEndRequest

Field	Type	Label	Description
ledger_id	string		Must correspond to the ledger ID reported by the Ledger Identification Service. Must be a valid LedgerString (as describe in value.proto). Optional

GetLedgerEndResponse

Field	Type	Label	Description
offset	LedgerOffset		The absolute offset of the current ledger end.

GetTransactionByEventIdRequest

Field	Type	Label	Description
ledger_id	string		Must correspond to the ledger ID reported by the Ledger Identification Service. Must be a valid LedgerString (as described in value.proto). Optional
event_id	string		The ID of a particular event. Must be a valid LedgerString (as described in value.proto). Required
requesting_parties	string	repeated	The parties whose events the client expects to see. Events that are not visible for the parties in this collection will not be present in the response. Each element must be a valid PartyIdString (as described in value.proto). Required

GetTransactionByIdRequest

Field	Type	Label	Description
ledger_id	string		Must correspond to the ledger ID reported by the Ledger Identification Service. Must be a valid LedgerString (as describe in value.proto). Optional
transaction_id	string		The ID of a particular transaction. Must be a valid LedgerString (as describe in value.proto). Required
requesting_parties	string	repeated	The parties whose events the client expects to see. Events that are not visible for the parties in this collection will not be present in the response. Each element be a valid PartyIdString (as describe in value.proto). Required

GetTransactionResponse

Field	Type	Label	Description
transaction	TransactionTree

GetTransactionTreesResponse

Field	Type	Label	Description
transactions	TransactionTree	repeated	The list of transaction trees that matches the filter in GetTransactionsRequest for the GetTransactionTrees method.

GetTransactionsRequest

Field	Type	Label	Description
ledger_id	string		Must correspond to the ledger ID reported by the Ledger Identification Service. Must be a valid LedgerString (as described in value.proto). Optional
begin	LedgerOffset		Beginning of the requested ledger section. This offset is exclusive: the response will only contain transactions whose offset is strictly greater than this. Required
end	LedgerOffset		End of the requested ledger section. This offset is inclusive: the response will only contain transactions whose offset is less than or equal to this. Optional, if not set, the stream will not terminate.
filter	TransactionFilter		Requesting parties with template filters. Template filters must be empty for GetTransactionTrees requests. Required
verbose	bool		If enabled, values served over the API will contain more information than strictly necessary to interpret the data. In particular, setting the verbose flag to true triggers the ledger to include labels for record fields. Optional

GetTransactionsResponse

Field	Type	Label	Description
transactions	Transaction	repeated	The list of transactions that matches the filter in GetTransactionsRequest for the GetTransactions method.

TransactionService

Allows clients to read transactions from the ledger. In V2 Ledger API this service is not available anymore. Use v2.UpdateService instead.

Method name	Request type	Response type	Description
GetTransactions	GetTransactionsRequest	GetTransactionsResponse	Read the ledger’s filtered transaction stream for a set of parties. Lists only creates and archives, but not other events. Omits all events on transient contracts, i.e., contracts that were both created and archived in the same transaction.
GetTransactionTrees	GetTransactionsRequest	GetTransactionTreesResponse	Read the ledger’s complete transaction tree stream for a set of parties. The stream can be filtered only by parties, but not templates (template filter must be empty).
GetTransactionByEventId	GetTransactionByEventIdRequest	GetTransactionResponse	Lookup a transaction tree by the ID of an event that appears within it. For looking up a transaction instead of a transaction tree, please see GetFlatTransactionByEventId
GetTransactionById	GetTransactionByIdRequest	GetTransactionResponse	Lookup a transaction tree by its ID. For looking up a transaction instead of a transaction tree, please see GetFlatTransactionById
GetFlatTransactionByEventId	GetTransactionByEventIdRequest	GetFlatTransactionResponse	Lookup a transaction by the ID of an event that appears within it.
GetFlatTransactionById	GetTransactionByIdRequest	GetFlatTransactionResponse	Lookup a transaction by its ID.
GetLedgerEnd	GetLedgerEndRequest	GetLedgerEndResponse	Get the current ledger end. Subscriptions started with the returned offset will serve transactions created after this RPC was called.
GetLatestPrunedOffsets	GetLatestPrunedOffsetsRequest	GetLatestPrunedOffsetsResponse	Get the latest successfully pruned ledger offsets

com/daml/ledger/api/v1/value.proto

Enum

A value with finite set of alternative representations.

Field	Type	Label	Description
enum_id	Identifier		Omitted from the transaction stream when verbose streaming is not enabled. Optional when submitting commands.
constructor	string		Determines which of the Variant’s alternatives is encoded in this message. Must be a valid NameString. Required

GenMap

Field	Type	Label	Description
entries	GenMap.Entry	repeated

GenMap.Entry

Field	Type	Label	Description
key	Value
value	Value

Identifier

Unique identifier of an entity.

Field	Type	Label	Description
package_id	string		The identifier of the Daml package that contains the entity. Must be a valid PackageIdString. Required
module_name	string		The dot-separated module name of the identifier. Required
entity_name	string		The dot-separated name of the entity (e.g. record, template, …) within the module. Required

List

A homogenous collection of values.

Field	Type	Label	Description
elements	Value	repeated	The elements must all be of the same concrete value type. Optional

Map

Field	Type	Label	Description
entries	Map.Entry	repeated

Map.Entry

Field	Type	Label	Description
key	string
value	Value

Optional

Corresponds to Java’s Optional type, Scala’s Option, and Haskell’s Maybe. The reason why we need to wrap this in an additional message is that we need to be able to encode the None case in the Value oneof.

Field	Type	Label	Description
value	Value		optional

Record

Contains nested values.

Field	Type	Label	Description
record_id	Identifier		Omitted from the transaction stream when verbose streaming is not enabled. Optional when submitting commands.
fields	RecordField	repeated	The nested values of the record. Required

RecordField

A named nested value within a record.

Field	Type	Label	Description
label	string		When reading a transaction stream, it’s omitted if verbose streaming is not enabled. When submitting a commmand, it’s optional: - if all keys within a single record are present, the order in which fields appear does not matter. however, each key must appear exactly once. - if any of the keys within a single record are omitted, the order of fields MUST match the order of declaration in the Daml template. Must be a valid NameString
value	Value		A nested value of a record. Required

Value

Encodes values that the ledger accepts as command arguments and emits as contract arguments.

The values encoding use different classes of non-empty strings as identifiers. Those classes are defined as follows: - NameStrings are strings with length <= 1000 that match the regexp [A-Za-z\$_][A-Za-z0-9\$_]*. - PackageIdStrings are strings with length <= 64 that match the regexp [A-Za-z0-9\-_ ]+. - PartyIdStrings are strings with length <= 255 that match the regexp [A-Za-z0-9:\-_ ]+. - LedgerStrings are strings with length <= 255 that match the regexp [A-Za-z0-9#:\-_/ ]+. - ApplicationIdStrings are strings with length <= 255 that match the regexp [A-Za-z0-9#:\-_/ @\|]+.

Field	Type	Label	Description
oneof Sum.record	Record
oneof Sum.variant	Variant
oneof Sum.contract_id	string		Identifier of an on-ledger contract. Commands which reference an unknown or already archived contract ID will fail. Must be a valid LedgerString.
oneof Sum.list	List		Represents a homogeneous list of values.
oneof Sum.int64	sint64
oneof Sum.numeric	string		A Numeric, that is a decimal value with precision 38 (at most 38 significant digits) and a scale between 0 and 37 (significant digits on the right of the decimal point). The field has to match the regex [+-]?d{1,38}(.d{0,37})? and should be representable by a Numeric without loss of precision.
oneof Sum.text	string		A string.
oneof Sum.timestamp	sfixed64		Microseconds since the UNIX epoch. Can go backwards. Fixed since the vast majority of values will be greater than 2^28, since currently the number of microseconds since the epoch is greater than that. Range: 0001-01-01T00:00:00Z to 9999-12-31T23:59:59.999999Z, so that we can convert to/from https://www.ietf.org/rfc/rfc3339.txt
oneof Sum.party	string		An agent operating on the ledger. Must be a valid PartyIdString.
oneof Sum.bool	bool		True or false.
oneof Sum.unit	google.protobuf.Empty		This value is used for example for choices that don’t take any arguments.
oneof Sum.date	int32		Days since the unix epoch. Can go backwards. Limited from 0001-01-01 to 9999-12-31, also to be compatible with https://www.ietf.org/rfc/rfc3339.txt
oneof Sum.optional	Optional		The Optional type, None or Some
oneof Sum.map	Map		The Map type
oneof Sum.enum	Enum		The Enum type
oneof Sum.gen_map	GenMap		The GenMap type

Variant

A value with alternative representations.

Field	Type	Label	Description
variant_id	Identifier		Omitted from the transaction stream when verbose streaming is not enabled. Optional when submitting commands.
constructor	string		Determines which of the Variant’s alternatives is encoded in this message. Must be a valid NameString. Required
value	Value		The value encoded within the Variant. Required

com/daml/ledger/api/v1/version_service.proto

FeaturesDescriptor

Field	Type	Label	Description
user_management	UserManagementFeature		If set, then the Ledger API server supports user management. It is recommended that clients query this field to gracefully adjust their behavior for ledgers that do not support user management.
experimental	ExperimentalFeatures		Features under development or features that are used for ledger implementation testing purposes only.

Daml applications SHOULD not depend on these in production.

GetLedgerApiVersionRequest

Field	Type	Label	Description
ledger_id	string		Must correspond to the ledger ID reported by the Ledger Identification Service. Must be a valid LedgerString (as described in value.proto). Optional

GetLedgerApiVersionResponse

Field	Type	Label	Description
version	string		The version of the ledger API.
features	FeaturesDescriptor		The features supported by this Ledger API endpoint.

Daml applications CAN use the feature descriptor on top of version constraints on the Ledger API version to determine whether a given Ledger API endpoint supports the features required to run the application.

See the feature descriptions themselves for the relation between Ledger API versions and feature presence.

UserManagementFeature

Field	Type	Label	Description
supported	bool		Whether the Ledger API server provides the user management service.
max_rights_per_user	int32		The maximum number of rights that can be assigned to a single user. Servers MUST support at least 100 rights per user. A value of 0 means that the server enforces no rights per user limit.
max_users_page_size	int32		The maximum number of users the server can return in a single response (page). Servers MUST support at least a 100 users per page. A value of 0 means that the server enforces no page size limit.

VersionService

Allows clients to retrieve information about the ledger API version

Method name	Request type	Response type	Description
GetLedgerApiVersion	GetLedgerApiVersionRequest	GetLedgerApiVersionResponse	Read the Ledger API version

com/daml/ledger/api/v2/command_completion_service.proto

CompletionStreamRequest

Field	Type	Label	Description
application_id	string		Only completions of commands submitted with the same application_id will be visible in the stream. Must be a valid ApplicationIdString (as described in value.proto). Required unless authentication is used with a user token or a custom token specifying an application-id. In that case, the token’s user-id, respectively application-id, will be used for the request’s application_id.
parties	string	repeated	Non-empty list of parties whose data should be included. Only completions of commands for which at least one of the act_as parties is in the given set of parties will be visible in the stream. Must be a valid PartyIdString (as described in value.proto). Required
begin_exclusive	ParticipantOffset		This field indicates the minimum offset for completions. This can be used to resume an earlier completion stream. Optional, if not set the ledger uses the current ledger end offset instead.

CompletionStreamResponse

Field	Type	Label	Description
checkpoint	com.daml.ledger.api.v1.Checkpoint		This checkpoint may be used to restart consumption. The checkpoint belongs to the completion in this response. Required
completion	Completion		Required
domain_id	string		The sequencing domain. In case - successful/failed transactions: identifies the sequencing domain of the transaction - for successful/failed unassign commands: identifies the source domain - for successful/failed assign commands: identifies the target domain Required

CommandCompletionService

Allows clients to observe the status of their submissions. Commands may be submitted via the Command Submission Service. The on-ledger effects of their submissions are disclosed by the Update Service.

Commands may fail in 2 distinct manners:

1. Failure communicated synchronously in the gRPC error of the submission.
2. Failure communicated asynchronously in a Completion, see completion.proto.

Note that not only successfully submitted commands MAY produce a completion event. For example, the participant MAY choose to produce a completion event for a rejection of a duplicate command.

Clients that do not receive a successful completion about their submission MUST NOT assume that it was successful. Clients SHOULD subscribe to the CompletionStream before starting to submit commands to prevent race conditions.

Method name	Request type	Response type	Description
CompletionStream	CompletionStreamRequest	CompletionStreamResponse	Subscribe to command completion events.

com/daml/ledger/api/v2/command_service.proto

SubmitAndWaitForTransactionResponse

Field	Type	Label	Description
transaction	Transaction		The flat transaction that resulted from the submitted command. Required
completion_offset	string		The format of this field is described in participant_offset.proto. Optional

SubmitAndWaitForTransactionTreeResponse

Field	Type	Label	Description
transaction	TransactionTree		The transaction tree that resulted from the submitted command. Required
completion_offset	string		The format of this field is described in participant_offset.proto. Optional

SubmitAndWaitForUpdateIdResponse

Field	Type	Label	Description
update_id	string		The id of the transaction that resulted from the submitted command. Must be a valid LedgerString (as described in value.proto). Required
completion_offset	string		The format of this field is described in participant_offset.proto. Optional

SubmitAndWaitRequest

These commands are atomic, and will become transactions.

Field	Type	Label	Description
commands	Commands		The commands to be submitted. Required

CommandService

Command Service is able to correlate submitted commands with completion data, identify timeouts, and return contextual information with each tracking result. This supports the implementation of stateless clients.

Note that submitted commands generally produce completion events as well, even in case a command gets rejected. For example, the participant SHOULD produce a completion event for a rejection of a duplicate command.

Method name	Request type	Response type	Description
SubmitAndWait	SubmitAndWaitRequest	.google.protobuf.Empty	Submits a single composite command and waits for its result. Propagates the gRPC error of failed submissions including Daml interpretation errors.
SubmitAndWaitForUpdateId	SubmitAndWaitRequest	SubmitAndWaitForUpdateIdResponse	Submits a single composite command, waits for its result, and returns the update id. Propagates the gRPC error of failed submissions including Daml interpretation errors.
SubmitAndWaitForTransaction	SubmitAndWaitRequest	SubmitAndWaitForTransactionResponse	Submits a single composite command, waits for its result, and returns the transaction. Propagates the gRPC error of failed submissions including Daml interpretation errors.
SubmitAndWaitForTransactionTree	SubmitAndWaitRequest	SubmitAndWaitForTransactionTreeResponse	Submits a single composite command, waits for its result, and returns the transaction tree. Propagates the gRPC error of failed submissions including Daml interpretation errors.

com/daml/ledger/api/v2/command_submission_service.proto

SubmitReassignmentRequest

Field	Type	Label	Description
reassignment_command	ReassignmentCommand		The reassignment command to be submitted. Required

SubmitReassignmentResponse

SubmitRequest

The submitted commands will be processed atomically in a single transaction. Moreover, each Command in commands will be executed in the order specified by the request.

Field	Type	Label	Description
commands	Commands		The commands to be submitted in a single transaction. Required

SubmitResponse

CommandSubmissionService

Allows clients to attempt advancing the ledger’s state by submitting commands. The final states of their submissions are disclosed by the Command Completion Service. The on-ledger effects of their submissions are disclosed by the Update Service.

Commands may fail in 2 distinct manners:

1. Failure communicated synchronously in the gRPC error of the submission.
2. Failure communicated asynchronously in a Completion, see completion.proto.

Note that not only successfully submitted commands MAY produce a completion event. For example, the participant MAY choose to produce a completion event for a rejection of a duplicate command.

Clients that do not receive a successful completion about their submission MUST NOT assume that it was successful. Clients SHOULD subscribe to the CompletionStream before starting to submit commands to prevent race conditions.

Method name	Request type	Response type	Description
Submit	SubmitRequest	SubmitResponse	Submit a single composite command.
SubmitReassignment	SubmitReassignmentRequest	SubmitReassignmentResponse	Submit a single reassignment.

com/daml/ledger/api/v2/commands.proto

Commands

A composite command that groups multiple commands together.

Field	Type	Label	Description
workflow_id	string		Identifier of the on-ledger workflow that this command is a part of. Must be a valid LedgerString (as described in value.proto). Optional
application_id	string		Uniquely identifies the application or participant user that issued the command. Must be a valid ApplicationIdString (as described in value.proto). Required unless authentication is used with a user token or a custom token specifying an application-id. In that case, the token’s user-id, respectively application-id, will be used for the request’s application_id.
command_id	string		Uniquely identifies the command. The triple (application_id, party + act_as, command_id) constitutes the change ID for the intended ledger change, where party + act_as is interpreted as a set of party names. The change ID can be used for matching the intended ledger changes with all their completions. Must be a valid LedgerString (as described in value.proto). Required
party	string		Party on whose behalf the command should be executed. If ledger API authorization is enabled, then the authorization metadata must authorize the sender of the request to act on behalf of the given party. Must be a valid PartyIdString (as described in value.proto). Deprecated in favor of the act_as field. If both are set, then the effective list of parties on whose behalf the command should be executed is the union of all parties listed in party and act_as. Optional
commands	com.daml.ledger.api.v1.Command	repeated	Individual elements of this atomic command. Must be non-empty. Required
oneof deduplication_period.deduplication_duration	google.protobuf.Duration		Specifies the length of the deduplication period. It is interpreted relative to the local clock at some point during the submission’s processing. Must be non-negative. Must not exceed the maximum deduplication time (see ledger_configuration_service.proto).
oneof deduplication_period.deduplication_offset	string		Specifies the start of the deduplication period by a completion stream offset (exclusive). Must be a valid LedgerString (as described in participant_offset.proto).
min_ledger_time_abs	google.protobuf.Timestamp		Lower bound for the ledger time assigned to the resulting transaction. Note: The ledger time of a transaction is assigned as part of command interpretation. Use this property if you expect that command interpretation will take a considerate amount of time, such that by the time the resulting transaction is sequenced, its assigned ledger time is not valid anymore. Must not be set at the same time as min_ledger_time_rel. Optional
min_ledger_time_rel	google.protobuf.Duration		Same as min_ledger_time_abs, but specified as a duration, starting from the time the command is received by the server. Must not be set at the same time as min_ledger_time_abs. Optional
act_as	string	repeated	Set of parties on whose behalf the command should be executed. If ledger API authorization is enabled, then the authorization metadata must authorize the sender of the request to act on behalf of each of the given parties. This field supersedes the party field. The effective set of parties on whose behalf the command should be executed is the union of all parties listed in party and act_as, which must be non-empty. Each element must be a valid PartyIdString (as described in value.proto). Optional
read_as	string	repeated	Set of parties on whose behalf (in addition to all parties listed in act_as) contracts can be retrieved. This affects Daml operations such as fetch, fetchByKey, lookupByKey, exercise, and exerciseByKey. Note: A participant node of a Daml network can host multiple parties. Each contract present on the participant node is only visible to a subset of these parties. A command can only use contracts that are visible to at least one of the parties in act_as or read_as. This visibility check is independent from the Daml authorization rules for fetch operations. If ledger API authorization is enabled, then the authorization metadata must authorize the sender of the request to read contract data on behalf of each of the given parties. Optional
submission_id	string		A unique identifier to distinguish completions for different submissions with the same change ID. Typically a random UUID. Applications are expected to use a different UUID for each retry of a submission with the same change ID. Must be a valid LedgerString (as described in value.proto).

If omitted, the participant or the committer may set a value of their choice. Optional

• • disclosed_contracts

  • com.daml.ledger.api.v1.DisclosedContract
  • repeated
  • Additional contracts used to resolve contract & contract key lookups. Optional

• • domain_id

  • string
  • Must be a valid domain ID Required

com/daml/ledger/api/v2/completion.proto

Completion

A completion represents the status of a submitted command on the ledger: it can be successful or failed.

Field	Type	Label	Description
command_id	string		The ID of the succeeded or failed command. Must be a valid LedgerString (as described in value.proto). Required
status	google.rpc.Status		Identifies the exact type of the error. It uses the same format of conveying error details as it is used for the RPC responses of the APIs. Optional
update_id	string		The update_id of the transaction or reassignment that resulted from the command with command_id. Only set for successfully executed commands. Must be a valid LedgerString (as described in value.proto).
application_id	string		The application-id or user-id that was used for the submission, as described in commands.proto. Must be a valid ApplicationIdString (as described in value.proto). Optional for historic completions where this data is not available.
act_as	string	repeated	The set of parties on whose behalf the commands were executed. Contains the union of party and act_as from commands.proto. The order of the parties need not be the same as in the submission. Each element must be a valid PartyIdString (as described in value.proto). Optional for historic completions where this data is not available.
submission_id	string		The submission ID this completion refers to, as described in commands.proto. Must be a valid LedgerString (as described in value.proto). Optional
oneof deduplication_period.deduplication_offset	string		Specifies the start of the deduplication period by a completion stream offset (exclusive).

Must be a valid LedgerString (as described in value.proto).

• • oneof deduplication_period.deduplication_duration
  • google.protobuf.Duration
  • Specifies the length of the deduplication period. It is measured in record time of completions.

Must be non-negative.

• • trace_context

  • com.daml.ledger.api.v1.TraceContext
  • Optional; ledger api trace context

The trace context transported in this message corresponds to the trace context supplied by the client application in a HTTP2 header of the original command submission. We typically use a header to transfer this type of information. Here we use message body, because it is used in gRPC streams which do not support per message headers. This field will be populated with the trace context contained in the original submission. If that was not provided, a unique ledger-api-server generated trace context will be used instead.

com/daml/ledger/api/v2/event_query_service.proto

Archived

Field	Type	Label	Description
archived_event	com.daml.ledger.api.v1.ArchivedEvent		Required
domain_id	string		Required The domain which sequenced the archival of the contract

Created

Field	Type	Label	Description
created_event	com.daml.ledger.api.v1.CreatedEvent		Required
domain_id	string		The domain which sequenced the creation of the contract Required

GetEventsByContractIdResponse

Field	Type	Label	Description
created	Created		The create event for the contract with the contract_id given in the request provided it exists and has not yet been pruned. Optional
archived	Archived		The archive event for the contract with the contract_id given in the request provided such an archive event exists and it has not yet been pruned. Optional

EventQueryService

Query events by contract id.

Note that querying by contract key is not (yet) supported, as contract keys are not supported (yet) in multi-domain scenarios.

Method name	Request type	Response type	Description
GetEventsByContractId	.com.daml.ledger.api.v1.GetEventsByContractIdRequest	GetEventsByContractIdResponse	Get the create and the consuming exercise event for the contract with the provided ID. No events will be returned for contracts that have been pruned because they have already been archived before the latest pruning offset.

com/daml/ledger/api/v2/package_service.proto

GetPackageRequest

Field	Type	Label	Description
package_id	string		The ID of the requested package. Must be a valid PackageIdString (as described in value.proto). Required

GetPackageStatusRequest

Field	Type	Label	Description
package_id	string		The ID of the requested package. Must be a valid PackageIdString (as described in value.proto). Required

ListPackagesRequest

PackageService

Allows clients to query the Daml-LF packages that are supported by the server.

Method name	Request type	Response type	Description
ListPackages	ListPackagesRequest	.com.daml.ledger.api.v1.ListPackagesResponse	Returns the identifiers of all supported packages.
GetPackage	GetPackageRequest	.com.daml.ledger.api.v1.GetPackageResponse	Returns the contents of a single package.
GetPackageStatus	GetPackageStatusRequest	.com.daml.ledger.api.v1.GetPackageStatusResponse	Returns the status of a single package.

com/daml/ledger/api/v2/participant_offset.proto

ParticipantOffset

Describes a specific point on the participant. This is a participant local value: a participant offset is meaningful only in the context of its participant. Different participants may associate different offsets to the same change synchronized over a domain, and conversely, the same literal participant offset may refer to different changes on different participants.

This is also a unique index of the changes which happened on the virtual shared ledger. Participant offset define an order, which is the same in which order the updates are visible as subscribing to the UpdateService. This ordering is also a fully causal ordering for one specific domain: for two updates synchronized by the same domain, the one with a bigger participant offset happened after than the one with a smaller participant offset. Please note this is not true for updates synchronized by a different domain. Accordingly, the participant offset order may deviate from the order of the changes on the virtual shared ledger.

The Ledger API endpoints that take offsets allow to specify portions of the participant that are relevant for the client to read.

Offsets returned by the Ledger API can be used as-is (e.g. to keep track of processed transactions and provide a restart point to use in case of need).

The format of absolute offsets is opaque to the client: no client-side transformation of an offset is guaranteed to return a meaningful offset.

The server implementation ensures internally that offsets are lexicographically comparable.

Field	Type	Label	Description
oneof value.absolute	string		The format of this string is specific to the participant and opaque to the client.
oneof value.boundary	ParticipantOffset.ParticipantBoundary

ParticipantOffset.ParticipantBoundary

Name	Number	Description
PARTICIPANT_BEGIN	0	Refers to the first transaction.
PARTICIPANT_END	1	Refers to the currently last transaction, which is a moving target.

com/daml/ledger/api/v2/reassignment.proto

AssignedEvent

Records that a contract has been assigned, and it can be used on the target domain.

Field	Type	Label	Description
source	string		The ID of the source domain. Must be a valid domain ID. Required
target	string		The ID of the target domain. Must be a valid domain ID. Required
unassign_id	string		The ID from the unassigned event. For correlation capabilities. For one contract the (unassign_id, source domain) pair is unique. Must be a valid LedgerString (as described in value.proto). Required
submitter	string		Party on whose behalf the assign command was executed. Empty if the assignment happened offline via the repair service. Must be a valid PartyIdString (as described in value.proto). Optional
reassignment_counter	uint64		Each corresponding assigned and unassigned event has the same reassignment_counter. This strictly increases with each unassign command for the same contract. Creation of the contract corresponds to reassignment_counter equals zero. Required
created_event	com.daml.ledger.api.v1.CreatedEvent		Required

Reassignment

Complete view of an on-ledger reassignment.

Field	Type	Label	Description
update_id	string		Assigned by the server. Useful for correlating logs. Must be a valid LedgerString (as described in value.proto). Required
command_id	string		The ID of the command which resulted in this reassignment. Missing for everyone except the submitting party on the submitting participant. Must be a valid LedgerString (as described in value.proto). Optional
workflow_id	string		The workflow ID used in reassignment command submission. Only set if the workflow_id for the command was set. Must be a valid LedgerString (as described in value.proto). Optional
offset	string		The absolute offset. The format of this field is described in participant_offset.proto. Required
oneof event.unassigned_event	UnassignedEvent
oneof event.assigned_event	AssignedEvent
trace_context	com.daml.ledger.api.v1.TraceContext		Optional; ledger api trace context

The trace context transported in this message corresponds to the trace context supplied by the client application in a HTTP2 header of the original command submission. We typically use a header to transfer this type of information. Here we use message body, because it is used in gRPC streams which do not support per message headers. This field will be populated with the trace context contained in the original submission. If that was not provided, a unique ledger-api-server generated trace context will be used instead.

UnassignedEvent

Records that a contract has been unassigned, and it becomes unusable on the source domain

Field	Type	Label	Description
unassign_id	string		The ID of the unassignment. This needs to be used as an input for a assign ReassignmentCommand. For one contract the (unassign_id, source domain) pair is unique. Must be a valid LedgerString (as described in value.proto). Required
contract_id	string		The ID of the reassigned contract. Must be a valid LedgerString (as described in value.proto). Required
template_id	com.daml.ledger.api.v1.Identifier		The template of the reassigned contract. Required
source	string		The ID of the source domain Must be a valid domain ID Required
target	string		The ID of the target domain Must be a valid domain ID Required
submitter	string		Party on whose behalf the unassign command was executed. Empty if the unassignment happened offline via the repair service. Must be a valid PartyIdString (as described in value.proto). Optional
reassignment_counter	uint64		Each corresponding assigned and unassigned event has the same reassignment_counter. This strictly increases with each unassign command for the same contract. Creation of the contract corresponds to reassignment_counter equals zero. Required
assignment_exclusivity	google.protobuf.Timestamp		Assignment exclusivity Before this time (measured on the target domain), only the submitter of the unassignment can initiate the assignment Defined for reassigning participants. Optional
witness_parties	string	repeated	The parties that are notified of this event. Required

com/daml/ledger/api/v2/reassignment_command.proto

AssignCommand

Assign a contract

Field	Type	Label	Description
unassign_id	string		The ID from the unassigned event to be completed by this assignment. Must be a valid LedgerString (as described in value.proto). Required
source	string		The ID of the source domain Must be a valid domain ID Required
target	string		The ID of the target domain Must be a valid domain ID Required

ReassignmentCommand

Field	Type	Label	Description
workflow_id	string		Identifier of the on-ledger workflow that this command is a part of. Must be a valid LedgerString (as described in value.proto). Optional
application_id	string		Uniquely identifies the application or participant user that issued the command. Must be a valid ApplicationIdString (as described in value.proto). Required unless authentication is used with a user token or a custom token specifying an application-id. In that case, the token’s user-id, respectively application-id, will be used for the request’s application_id.
command_id	string		Uniquely identifies the command. The triple (application_id, submitter, command_id) constitutes the change ID for the intended ledger change. The change ID can be used for matching the intended ledger changes with all their completions. Must be a valid LedgerString (as described in value.proto). Required
submitter	string		Party on whose behalf the command should be executed. If ledger API authorization is enabled, then the authorization metadata must authorize the sender of the request to act on behalf of the given party. Must be a valid PartyIdString (as described in value.proto). Required
oneof command.unassign_command	UnassignCommand
oneof command.assign_command	AssignCommand
submission_id	string		A unique identifier to distinguish completions for different submissions with the same change ID. Typically a random UUID. Applications are expected to use a different UUID for each retry of a submission with the same change ID. Must be a valid LedgerString (as described in value.proto).

If omitted, the participant or the committer may set a value of their choice. Optional

UnassignCommand

Unassign a contract

Field	Type	Label	Description
contract_id	string		The ID of the contract the client wants to unassign. Must be a valid LedgerString (as described in value.proto). Required
source	string		The ID of the source domain Must be a valid domain ID Required
target	string		The ID of the target domain Must be a valid domain ID Required

com/daml/ledger/api/v2/state_service.proto

ActiveContract

Field	Type	Label	Description
created_event	com.daml.ledger.api.v1.CreatedEvent		Required
domain_id	string		A valid domain ID Required
reassignment_counter	uint64		Each corresponding assigned and unassigned event has the same reassignment_counter. This strictly increases with each unassign command for the same contract. Creation of the contract corresponds to reassignment_counter equals zero. This field will be the reassignment_counter of the latest observable activation event on this domain, which is before the active_at_offset. Required

GetActiveContractsRequest

Field	Type	Label	Description
filter	TransactionFilter		Templates to include in the served snapshot, per party. Required
verbose	bool		If enabled, values served over the API will contain more information than strictly necessary to interpret the data. In particular, setting the verbose flag to true triggers the ledger to include labels for record fields. Optional
active_at_offset	string		The offset at which the snapshot of the active contracts will be computed. Must be no greater than the current ledger end offset. Must be greater than or equal to the last pruning offset. If not set the current ledger end offset will be used. Optional

GetActiveContractsResponse

Field	Type	Label	Description
offset	string		Included only in the last message. The client should start consuming the transactions endpoint with this offset. The format of this field is described in participant_offset.proto.
workflow_id	string		The workflow ID used in command submission which corresponds to the contract_entry. Only set if the workflow_id for the command was set. Must be a valid LedgerString (as described in value.proto). Optional
oneof contract_entry.active_contract	ActiveContract		The contract is active on the given domain, meaning: there was an activation event on the given domain ( created, assigned), which is not followed by a deactivation event (archived, unassigned) on the same domain, until the active_at_offset. Since activeness is defined as a per domain concept, it is possible, that a contract is active on one domain, but already archived on another. There will be one such message for each domain the contract is active on.
oneof contract_entry.incomplete_unassigned	IncompleteUnassigned		Included iff the unassigned event was before or at the active_at_offset, but there was no corresponding assigned event before or at the active_at_offset.
oneof contract_entry.incomplete_assigned	IncompleteAssigned		Important: this message is not indicating that the contract is active on the target domain! Included iff the assigned event was before or at the active_at_offset, but there was no corresponding unassigned event before or at the active_at_offset.

GetConnectedDomainsRequest

Field	Type	Label	Description
party	string		The party of interest Must be a valid PartyIdString (as described in value.proto). Required

GetConnectedDomainsResponse

Field	Type	Label	Description
connected_domains	GetConnectedDomainsResponse.ConnectedDomain	repeated

GetConnectedDomainsResponse.ConnectedDomain

Field	Type	Label	Description
domain_alias	string		The alias of the domain Required
domain_id	string		The ID of the domain Required
permission	ParticipantPermission		The permission on the domain Required

GetLatestPrunedOffsetsRequest

Empty for now, but may contain fields in the future.

GetLatestPrunedOffsetsResponse

Field	Type	Label	Description
participant_pruned_up_to_inclusive	ParticipantOffset		The offset up to which the ledger has been pruned, disregarding the state of all divulged contracts pruning.
all_divulged_contracts_pruned_up_to_inclusive	ParticipantOffset		The offset up to which all divulged events have been pruned on the ledger. It can be at or before the participant_pruned_up_to_inclusive offset. For more details about all divulged events pruning, see PruneRequest.prune_all_divulged_contracts in participant_pruning_service.proto.

GetLedgerEndRequest

GetLedgerEndResponse

Field	Type	Label	Description
offset	ParticipantOffset		The absolute offset of the current ledger end.

IncompleteAssigned

Field	Type	Label	Description
assigned_event	AssignedEvent		Required

IncompleteUnassigned

Field	Type	Label	Description
created_event	com.daml.ledger.api.v1.CreatedEvent		Required
unassigned_event	UnassignedEvent		Required

ParticipantPermission

Enum indicating the permission level that the participant has for the party whose connected domains are being listed.

Name	Number	Description
Submission	0
Confirmation	1	participant can only confirm transactions
Observation	2	participant can only observe transactions

StateService

Allows clients to get state from the ledger.

Method name	Request type	Response type	Description
GetActiveContracts	GetActiveContractsRequest	GetActiveContractsResponse	Returns a stream of the snapshot of the active contracts and incomplete reassignments at a ledger offset. If there are no active contracts, the stream returns a single response message with the offset at which the snapshot has been taken. Clients SHOULD use the offset in the last GetActiveContractsResponse message to continue streaming transactions with the update service. Clients SHOULD NOT assume that the set of active contracts they receive reflects the state at the ledger end.
GetConnectedDomains	GetConnectedDomainsRequest	GetConnectedDomainsResponse	Get the list of connected domains at the time of the query.
GetLedgerEnd	GetLedgerEndRequest	GetLedgerEndResponse	Get the current ledger end. Subscriptions started with the returned offset will serve events after this RPC was called.
GetLatestPrunedOffsets	GetLatestPrunedOffsetsRequest	GetLatestPrunedOffsetsResponse	Get the latest successfully pruned ledger offsets

com/daml/ledger/api/v2/testing/time_service.proto

GetTimeRequest

GetTimeResponse

Field	Type	Label	Description
current_time	google.protobuf.Timestamp		The current time according to the ledger server.

SetTimeRequest

Field	Type	Label	Description
current_time	google.protobuf.Timestamp		MUST precisely match the current time as it’s known to the ledger server.
new_time	google.protobuf.Timestamp		The time the client wants to set on the ledger. MUST be a point int time after current_time.

TimeService

Optional service, exposed for testing static time scenarios.

Method name	Request type	Response type	Description
GetTime	GetTimeRequest	GetTimeResponse	Returns the current time according to the ledger server.
SetTime	SetTimeRequest	.google.protobuf.Empty	Allows clients to change the ledger’s clock in an atomic get-and-set operation.

com/daml/ledger/api/v2/transaction.proto

Transaction

Filtered view of an on-ledger transaction’s create and archive events.

Field	Type	Label	Description
update_id	string		Assigned by the server. Useful for correlating logs. Must be a valid LedgerString (as described in value.proto). Required
command_id	string		The ID of the command which resulted in this transaction. Missing for everyone except the submitting party. Must be a valid LedgerString (as described in value.proto). Optional
workflow_id	string		The workflow ID used in command submission. Must be a valid LedgerString (as described in value.proto). Optional
effective_at	google.protobuf.Timestamp		Ledger effective time. Must be a valid LedgerString (as described in value.proto). Required
events	com.daml.ledger.api.v1.Event	repeated	The collection of events. Only contains CreatedEvent or ArchivedEvent. Required
offset	string		The absolute offset. The format of this field is described in participant_offset.proto. Required
domain_id	string		A valid domain ID. Identifies the domain that synchronized the transaction. Required
trace_context	com.daml.ledger.api.v1.TraceContext		Optional; ledger api trace context

The trace context transported in this message corresponds to the trace context supplied by the client application in a HTTP2 header of the original command submission. We typically use a header to transfer this type of information. Here we use message body, because it is used in gRPC streams which do not support per message headers. This field will be populated with the trace context contained in the original submission. If that was not provided, a unique ledger-api-server generated trace context will be used instead.

TransactionTree

Complete view of an on-ledger transaction.

Field	Type	Label	Description
update_id	string		Assigned by the server. Useful for correlating logs. Must be a valid LedgerString (as described in value.proto). Required
command_id	string		The ID of the command which resulted in this transaction. Missing for everyone except the submitting party. Must be a valid LedgerString (as described in value.proto). Optional
workflow_id	string		The workflow ID used in command submission. Only set if the workflow_id for the command was set. Must be a valid LedgerString (as described in value.proto). Optional
effective_at	google.protobuf.Timestamp		Ledger effective time. Required
offset	string		The absolute offset. The format of this field is described in participant_offset.proto. Required
events_by_id	TransactionTree.EventsByIdEntry	repeated	Changes to the ledger that were caused by this transaction. Nodes of the transaction tree. Each key be a valid LedgerString (as describe in value.proto). Required
root_event_ids	string	repeated	Roots of the transaction tree. Each element must be a valid LedgerString (as describe in value.proto). The elements are in the same order as the commands in the corresponding Commands object that triggered this transaction. Required
domain_id	string		A valid domain ID. Identifies the domain that synchronized the transaction. Required
trace_context	com.daml.ledger.api.v1.TraceContext		Optional; ledger api trace context

The trace context transported in this message corresponds to the trace context supplied by the client application in a HTTP2 header of the original command submission. We typically use a header to transfer this type of information. Here we use message body, because it is used in gRPC streams which do not support per message headers. This field will be populated with the trace context contained in the original submission. If that was not provided, a unique ledger-api-server generated trace context will be used instead.

TransactionTree.EventsByIdEntry

Field	Type	Label	Description
key	string
value	com.daml.ledger.api.v1.TreeEvent

com/daml/ledger/api/v2/transaction_filter.proto

TransactionFilter

A filter both for filtering create and archive events as well as for filtering transaction trees.

Field	Type	Label	Description
filters_by_party	TransactionFilter.FiltersByPartyEntry	repeated	Each key must be a valid PartyIdString (as described in value.proto). The interpretation of the filter depends on the stream being filtered: (1) For transaction tree streams all party keys used as wildcard filters, and all subtrees whose root has one of the listed parties as an informee are returned. If there are InclusiveFilters, those will control returned CreatedEvent fields were applicable, but not used for template/interface filtering. (2) For transaction and active-contract-set streams create and archive events are returned for all contracts whose stakeholders include at least one of the listed parties and match the per-party filter. Required

TransactionFilter.FiltersByPartyEntry

Field	Type	Label	Description
key	string
value	com.daml.ledger.api.v1.Filters

com/daml/ledger/api/v2/update_service.proto

GetTransactionByEventIdRequest

Field	Type	Label	Description
event_id	string		The ID of a particular event. Must be a valid LedgerString (as described in value.proto). Required
requesting_parties	string	repeated	The parties whose events the client expects to see. Events that are not visible for the parties in this collection will not be present in the response. Each element must be a valid PartyIdString (as described in value.proto). Required

GetTransactionByIdRequest

Field	Type	Label	Description
update_id	string		The ID of a particular transaction. Must be a valid LedgerString (as describe in value.proto). Required
requesting_parties	string	repeated	The parties whose events the client expects to see. Events that are not visible for the parties in this collection will not be present in the response. Each element be a valid PartyIdString (as describe in value.proto). Required

GetTransactionResponse

Field	Type	Label	Description
transaction	Transaction		Required

GetTransactionTreeResponse

Field	Type	Label	Description
transaction	TransactionTree		Required

GetUpdateTreesResponse

Field	Type	Label	Description
oneof update.transaction_tree	TransactionTree
oneof update.reassignment	Reassignment

GetUpdatesRequest

Field	Type	Label	Description
begin_exclusive	ParticipantOffset		Beginning of the requested ledger section. The response will only contain transactions whose offset is strictly greater than this. Required
end_inclusive	ParticipantOffset		End of the requested ledger section. The response will only contain transactions whose offset is less than or equal to this. Optional, if not set, the stream will not terminate.
filter	TransactionFilter		Requesting parties with template filters. Template filters must be empty for GetUpdateTrees requests. Required
verbose	bool		If enabled, values served over the API will contain more information than strictly necessary to interpret the data. In particular, setting the verbose flag to true triggers the ledger to include labels, record and variant type ids for record fields. Optional

GetUpdatesResponse

Field	Type	Label	Description
oneof update.transaction	Transaction
oneof update.reassignment	Reassignment

UpdateService

Allows clients to read updates (transactions and reassignments) from the ledger.

GetUpdates and GetUpdateTrees provide a comprehensive stream of updates/changes which happened on the virtual shared ledger. These streams are indexed with ledger offsets, which are strictly increasing. The virtual shared ledger consist of changes happening on multiple domains which are connected to the serving participant. Each update belongs to one domain, this is provided in the result (the domain_id field in Transaction and TransactionTree for transactions, the source field in UnassignedEvent and the target field in AssignedEvent). Consumers can rely on strong causal guarantees on the virtual shared ledger for a single domain: updates which have greater offsets are happened after than updates with smaller offsets for the same domain. Across different domains this is not guaranteed.

Method name	Request type	Response type	Description
GetUpdates	GetUpdatesRequest	GetUpdatesResponse	Read the ledger’s filtered transaction stream and related reassignments for a set of parties. For transactions it lists only creates and archives, but no other events. Omits all events on transient contracts, i.e., contracts that were both created and archived in the same transaction.
GetUpdateTrees	GetUpdatesRequest	GetUpdateTreesResponse	Read the ledger’s complete transaction tree stream and related reassignments for a set of parties. The stream will be filtered only by the parties as wildcard parties. The template/interface filters describe the respective fields in the CreatedEvent results.
GetTransactionTreeByEventId	GetTransactionByEventIdRequest	GetTransactionTreeResponse	Lookup a transaction tree by the ID of an event that appears within it. For looking up a transaction instead of a transaction tree, please see GetTransactionByEventId
GetTransactionTreeById	GetTransactionByIdRequest	GetTransactionTreeResponse	Lookup a transaction tree by its ID. For looking up a transaction instead of a transaction tree, please see GetTransactionById
GetTransactionByEventId	GetTransactionByEventIdRequest	GetTransactionResponse	Lookup a transaction by the ID of an event that appears within it.
GetTransactionById	GetTransactionByIdRequest	GetTransactionResponse	Lookup a transaction by its ID.

com/daml/ledger/api/v2/version_service.proto

GetLedgerApiVersionRequest

VersionService

Allows clients to retrieve information about the ledger API version

Method name	Request type	Response type	Description
GetLedgerApiVersion	GetLedgerApiVersionRequest	.com.daml.ledger.api.v1.GetLedgerApiVersionResponse	Read the Ledger API version

Scalar Value Types

.proto type	Notes	C++ type	Java type	Python type
double		double	double	float
float		float	float	float
int32	Uses variable-length encoding. Inefficient for encoding negative numbers – if your field is likely to have negative values, use sint32 instead.	int32	int	int
int64	Uses variable-length encoding. Inefficient for encoding negative numbers – if your field is likely to have negative values, use sint64 instead.	int64	long	int/long
uint32	Uses variable-length encoding.	uint32	int	int/long
uint64	Uses variable-length encoding.	uint64	long	int/long
sint32	Uses variable-length encoding. Signed int value. These more efficiently encode negative numbers than regular int32s.	int32	int	int
sint64	Uses variable-length encoding. Signed int value. These more efficiently encode negative numbers than regular int64s.	int64	long	int/long
fixed32	Always four bytes. More efficient than uint32 if values are often greater than 2^28.	uint32	int	int
fixed64	Always eight bytes. More efficient than uint64 if values are often greater than 2^56.	uint64	long	int/long
sfixed32	Always four bytes.	int32	int	int
sfixed64	Always eight bytes.	int64	long	int/long
bool		bool	boolean	boolean
string	A string must always contain UTF-8 encoded or 7-bit ASCII text.	string	String	str/unicode
bytes	May contain any arbitrary sequence of bytes.	string	ByteString	str