Security¶

Cryptographic Key Usage¶

This section covers the generation and usage of cryptographic keys in the Canton nodes. It assumes that the configuration sets auto-init = true which leads to the generation of the default keys on a node’s startup.

The scope of cryptographic keys covers all Canton-protocol specific keys, private keys for TLS, as well as additional keys required for the domain integrations, e.g., with Besu.

Supported Cryptographic Schemes in Canton¶

Within Canton we use the cryptographic primitives of signing, symmetric and asymmetric encryption, and MAC with the following supported schemes:

**Supported Cryptographic Schemes** - (**D =** default, **S =** supported, **P =** partially supported, for instance just signature verification but no signing with a private key, and **/ =** not supported. Inside the brackets **[<scheme>]** are the values to use when configuring Canton)¶
Crypto Provider	Tink	JCE	KMS
Signing
Ed25519 [ed-25519]	D	D	P
ECDSA P-256 [ec-dsa-p-256]	S	S	D
ECDSA P-384 [ec-dsa-p-384]	S	S	S
Symmetric Encryption
AES128-GCM [aes-128-gcm]	D	D	D
Asymmetric Encryption
ECIES on P-256 with HMAC-SHA256 and AES128-GCM [ecies-p-256-hkdf-hmac-sha-256-aes-128-gcm]	D	D	/
ECIES on P-256 with HMAC-SHA256 and AES128-CBC [ecies-p-256-hkdf-hmac-sha-256-aes-128-cbc]	/	S	/
RSA 2048 with OAEP and SHA-256 [rsa-2048-oaep-sha-256]	/	S	D
MAC
HMAC with SHA-256 [hmac-sha-256]	D	D	D

Key Generation and Storage¶

Canton keys are generated in the node and stored in the node’s primary storage. Canton allows for the use of a Key Management Service (KMS) to either: (a) encrypt the private keys and protect them locally or (b) directly use the KMS to store and manage the private keys. You can find more information on how to configure this service in Key Management Service (KMS) Setup.

Public Key Distribution using Topology Management¶

The public keys of the corresponding key pairs that are used for signing and asymmetric encryption within Canton are distributed using Canton’s Topology Management. Specifically, signing and asymmetric encryption public keys are distributed using OwnerToKeyMapping transactions, which associate a node with a public key for either signing or encryption, and NamespaceDelegation for namespace signing public keys.

See Topology Transactions for details on the specific topology transactions in use.

Common Node Keys¶

Each node provides an Admin API for administrative purposes, which is secured using TLS.

The node reads the private key for the TLS server certificate from a file at startup.

Participant Node Keys¶

Participant Namespace Signing Key¶

A Canton participant node spans its own identity namespace, for instance for its own id and the Daml parties allocated on the participant node. The namespace is the hash of the public key of the participant namespace signing key.

The private key is used to sign and thereby authorize all topology transactions for this namespace and this participant, including the following transactions:

Root NamespaceDelegation for the new identity namespace of the participant
OwnerToKeyMapping for all the public keys that the participant will generate and use (these keys will be explained in the follow-up sections)
PartyToParticipant for the parties allocated on this participant
VettedPackages for the packages that have been vetted by this participant

Signing Key¶

In addition to the topology signing key, a participant node will generate another signing key pair that is used for the Canton transaction protocol in the following cases:

Sequencer Authentication: Signing the nonce generated by the sequencer as part of its challenge-response authentication protocol. The sequencer verifies the signature with the public key registered for the member in the topology state.
Transaction Protocol
- The Merkle tree root hash of confirmation requests is signed for a top-level view.
- The confirmation responses sent to the mediator are signed as a whole.
- The Merkle tree root hash of transfer-in and transfer-out messages is signed.
Pruning: Signing of ACS commitments.

Participant Encryption Key¶

In addition to a signing key pair, a participant node also generates a key pair for encryption based on an asymmetric encryption scheme. A transaction payload is encrypted for a recipient based on the recipient’s public encryption key that is part of the topology state.

See the next section on how a transaction is encrypted using an ephemeral symmetric key.

View Encryption Key¶

A transaction is composed of multiple views due to sub-transaction privacy. Instead of duplicating each view by directly encrypting the view for each recipient using their participant encryption public key, Canton derives a symmetric key for each view to encrypt that view. The key is derived using a HKDF from a secure seed that is only stored encrypted under the public encryption key of a participants. Thereby, only the encrypted seed is duplicated but not a view.

Ledger API TLS Key¶

The private key for the TLS server certificate is provided as a file, which can optionally be encrypted and the symmetric decryption key is fetched from a given URL.

Domain Topology Manager Keys¶

Domain Namespace Signing Key¶

The domain topology manager governs the namespace of the domain and has a signing key pair for the namespace. The hash of the public key forms the namespace and all entities in the domain (mediator, sequencer, the topology manager itself) may have identities under the domain namespace.

The domain topology manager signs and thereby authorizes the following topology transactions:

NamespaceDelegation to register the namespace public key for the new namespace
OwnerToKeyMapping to register both its own signing public key (see next section) and the signing public keys of the other domain entities as part of the domain onboarding
ParticipantState to enable a new participant on the domain
MediatorDomainState to enable a new mediator on the domain

Signing Key¶

The domain topology manager is not part of the Canton transaction protocol, but it receives topology transactions via the sequencer. Therefore, in addition to the domain namespace, the domain topology manager has a signing key pair, which is registered in the topology state for the topology manager. This signing key is used to perform the challenge-response protocol of the sequencer.

Sequencer Node Keys¶

Signing Key¶

The sequencer has a signing key pair that is used to sign all events the sequencer sends to a subscriber.

Ethereum Sequencer¶

The Ethereum-based sequencer is a client of a Besu node and additional keys are used in this deployment:

TLS client certificate and private key to authenticate towards a Besu node if mutual authentication is configured.
A Wallet (in BIP-39 or UTC / JSON format), which contains or will result in a signing key pair for Ethereum transactions.

Fabric Sequencer¶

The Fabric-based sequencer is a Fabric application connecting to an organization’s peer node and the following additional keys are required:

TLS client certificate and private key to authenticate towards a Fabric peer node if mutual authentication is required.
The client identity’s certificate and private key.

Public API TLS Key¶

The private key for the TLS server certificate is provided as a file.

Mediator Node Keys¶

Signing Key¶

The mediator node is part of the Canton transaction protocol and uses a signing key pair for the following:

Sequencer Authentication: Signing of the challenge as part of the sequencer challenge-response protocol.
Signing of transaction results, transfer results, and rejections of malformed mediator requests.

Domain Node Keys¶

The domain node embeds a sequencer, mediator, and domain topology manager. The set of keys remains the same as for the individual nodes.

Canton Console Keys¶

When the Canton console runs separate from the node and mutual authentication is configured on the Admin API, then the console requires a TLS client certificate and corresponding private key as a file.

Cryptographic Key Management¶

Rotating Canton Node Keys¶

Canton supports rotation of node keys (signing and encryption) during live operation through its topology management. In order to ensure continuous operation, the new key is added first and then the previous key is removed.

For participant nodes, domain nodes, and domain topology managers, the nodes can rotate their keys directly using their own identity manager with the following command for example:

participant1.keys.secret.rotate_node_keys()

On a participant node both the signing and encryption key pairs are rotated. On a domain and domain manager node only the signing key pair, because they do not have a encryption key pair. Identity namespace root or intermediate keys are not rotated with this command, see below for commands on namespace key management.

For sequencer and mediator nodes that are part of a domain, the domain topology manager authorizes the key rotation and a reference needs to be passed in to the command, for example:

domainManager1.keys.secret.rotate_node_keys()
sequencer1.keys.secret.rotate_node_keys(domainManager1)
mediator1.keys.secret.rotate_node_keys(domainManager1)

We can also individually rotate a key by running the following command for example:

participant1.keys.secret.rotate_node_keys()

A fingerprint of a key can be retrieved from the list of public keys:

participant2.keys.secret
  .list()

Namespace Intermediate Key Management¶

Relying on the namespace root key to authorize topology transactions for the namespace is problematic because we cannot rotate the root key without losing the namespace. Instead we can create intermediate keys for the namespace, similar to an intermediate certificate authority, in the following way:

// create a new namespace intermediate key
val intermediateKey = identityManager.keys.secret.generate_signing_key()

// Create a namespace delegation for the intermediate key with the namespace root key
identityManager.topology.namespace_delegations.authorize(
  TopologyChangeOp.Add,
  rootKey.fingerprint,
  intermediateKey.fingerprint,
)

We can rotate an intermediate key by creating a new one and renewing the existing topology transactions that have been authorized with the previous intermediate key. First the new intermediate key has to be created in the same way as the initial intermediate key. To rotate the intermediate key and renew existing topology transactions:

// Renew all active topology transactions that have been authorized by the previous intermediate key with the new intermediate key
identityManager.topology.all.renew(intermediateKey.fingerprint, newIntermediateKey.fingerprint)

// Remove the previous intermediate key
identityManager.topology.namespace_delegations.authorize(
  TopologyChangeOp.Remove,
  rootKey.fingerprint,
  intermediateKey.fingerprint,
)

Moving the Namespace Secret Key to Offline Storage¶

An identity is ultimately bound to a particular secret key. Owning that secret key gives full authority over the entire namespace. From a security standpoint, it is therefore critical to keep the namespace secret key confidential. This can be achieved by moving the key off the node for offline storage. The identity management system can still be used by creating a new key and an appropriate intermediate certificate. The following steps illustrate how:

// fingerprint of namespace giving key
val participantId = participant1.id
val namespace = participantId.uid.namespace.fingerprint

// create new key
val name = "new-identity-key"
val fingerprint = participant1.keys.secret.generate_signing_key(name = name).fingerprint

// create an intermediate certificate authority through a namespace delegation
// we do this by adding a new namespace delegation for the newly generated key
// and we sign this using the root namespace key
participant1.topology.namespace_delegations.authorize(
  TopologyChangeOp.Add,
  namespace,
  fingerprint,
  signedBy = Some(namespace),
)

// export namespace key to file for offline storage, in this example, it's a temporary file
better.files.File.usingTemporaryFile("namespace", ".key") { privateKeyFile =>
  participant1.keys.secret.download_to(namespace, privateKeyFile.toString)

  // delete namespace key (very dangerous ...)
  participant1.keys.secret.delete(namespace, force = true)

When the root namespace key is required, it can be imported again on the original node or on another, using the following steps:

// import it back wherever needed
other.keys.secret.upload(privateKeyFile.toString, Some("newly-imported-identity-key"))

Identifier Delegation Key Management¶

Identifier delegations work similar to namespace delegations, however a key is only allowed to operate on a specific identity and not an entire namespace (cf. Topology Transactions).

Therefore the key management for identifier delegations also works the same way as for namespace delegations, where all the topology transactions authorized by the previous identifier delegation key have to be renewed.

Ledger-API Authorization¶

The Ledger API provides authorization support using JWT tokens. While the JWT token authorization allows third party applications to be authorized properly, it poses some issues for Canton internal services such as the PingService or the DarService, which are used to manage domain wide concerns. Therefore Canton generates a new admin bearer token (64 bytes, randomly generated, hex-encoded) on each startup, which is communicated to these services internally and used by these services to authorize themselves on the Ledger API. The admin token allows to act as any party registered on that participant node.

The admin token is only used within the same process. Therefore, in order to obtain this token, an attacker needs to be able to either dump the memory or capture the network traffic, which typically only a privileged user can do.

It is important to enable TLS together with JWT support in general, as otherwise tokens can be leaked to an attacker that has the ability to inspect network traffic.